• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book I
• /
• pp.178-191
• /
• 2003

OMC is essentialiy necessary compound in sun goods as organic UV protecting products. But the skin-trouble problem is raising because of skin penetration of OMC. In this study, non-capsulated pure OMC was compared with Organic-Inorganic-Nano-hybrid OMC for skin penetration force and SPF degree. Organic- Inorganic Nano-Hybrid OMC is OMC trapped in the pore of the mesoporous silica synthesized by the sol-gel method after OMC is nanoemulsified in the system of the hydrogenated Lecithin/ Ethanol/caprylic/capric triglyceride/OMC/water. OMC- nano- emulsion was obtained by a microfluidizing process at 1000bar and then micelle size in the nanoemulsion solution is 100-200nm range. Mesoporous silica nano-hybrid OMC was prepared by the process; surfactant was added in dissolved OMC-Nanoemulsion, then the rod Micelle was formed. OMC-nanoemulsion was capsulated in this rod Micelle and then silica precursor was added in the OMC-nanoemulsion solution. Through the hydrolysis reaction of the silica precursor, mesoporous silica concluding OMC-Nanocapsulation was obtained. The nano-hybrid surface of this OMC-Nanoemulsion-Inorganic system was treated with polyalkyl-silane compound. OMC-Mesoporous silica Nano-hybrids coated with polyalkyl-silane compound show the higher sun protecting factor (SPF Analyzer: INDEX 10-15) than pure OMC and could reduce a skin penetration of OMC. The physico-chemical properties of these nano-hybrids measured on the SPF index, partical size, strcture, specific surface area, pore size, morphology, UV absorption, rate of the OMC dissolution using SPF Analyzer, Laser light scattering system, XRD, BET, SEM, chroma Meter, HPLC, Image analyzer, microfluidizer, UV/VIS. spectrometer.

• 한국결정성장학회지
• /
• 제14권4호
• /
• pp.135-139
• /
• 2004

층상 구조인 유기-무기 혼성 화합물인 ($C_6H_5CH_2NH_3)_2CuCl_4$ 와($NH_3C_6/H_4C_2H_4_6/H_4NH_3)CuCl_4$를 직접 합성하였다. X-선 회절 데이터와 유기분자의 길이로부터 층간 삽입된 유기화합물인 아민의 배열을 결정하였다. 무기화합물 층은 정육면체 구석을 공유하고 있는 염화구리의 $CuCl_4^{2-}$ 층으로 구성되어 있다. ($C_6/H_5/CH_2NH_3)_2CuCl_4$의 경우는 양성자화 된 유기화합물 아민이 $CuCl_4^{2-}$ 층 안에 이중 층 구조로 삽입되어 있고, ($NH_3C_6/H_4C_2H_4C_6H_4NH_3)CuCl_4$의 경우는 단일 층 구조로 삽입되어있다.

• 실내환경 및 냄새 학회지
• /
• 제17권4호
• /
• pp.372-380
• /
• 2018

To abate the problem of odor from restaurants, a hybrid adsorbent consisting of organic and inorganic materials was developed and evaluated using acetaldehyde as a model compound was deveioped and evaluated. Powders of activated carbon, bentonite, and calcium hydroxide were mixed and calcinated to form adsorbent structure. The surface area of the hybrid adsorbent was smaller than that of high-quality activated carbon, but its microscopic image showed that contours and pores were developed on its surface. To determine its adsorption capacity, both batch isotherm and continuous flow column experiments were performed, and these results were compared with those using commercially available activated carbon. The isotherm tests showed that the hybrid adsorbent had a capacity 40 times higher than that of the activated carbon. In addition, the column experiments revealed that breakthrough time of the hybrid adsorbent was 2.5 times longer than that of the activated carbon. These experimental results were fitted to numerical simulations by using a homogeneous surface diffusion model (HSDM); the model estimated that the hybrid adsorbent might be able to remove acetaldehyde at a concentration of 40 ppm for a 5-month period. Since various odor compounds are commonly emitted as a mixture when meat is barbecued, it is necessary to conduct a series of experiments and HSDM simulations under various conditions to obtain design parameters for a full-scale device using the hybrid adsorbent.

• Bulletin of the Korean Chemical Society
• /
• 제27권10호
• /
• pp.1587-1592
• /
• 2006

We report the preparation, structure and magnetic properties of a new pillared complex, copper(II) hydroxy-1,4-butanedisulfonate, $Cu_2(OH)_3(O_3SC_4H_8SO_3)_{1/2}$. The titled compound was obtained by anion exchange, using copper hydroxyl nitrate $(Cu_2(OH)_3NO_3)$ as the starting material. According to the XRD data, this compound exhibits a pillared layered structure with organic layers tilted between the copper hydroxide layers with a tilt angle of $21.8^{\circ}$. FTIR spectroscopy confirms total exchange of nitrate by the sulfonate and indicates that the sulfonate functions are linked to the copper(II) ions with each aliphatic chain bridging the adjacent hydroxide layers. According to the dc and ac magnetic measurements, the title compound is a metamagnet consisting of spin-canted antiferromagnetic layers, with a Neel temperature of 11.8 K.

• 한국포장학회지
• /
• 제24권3호
• /
• pp.141-148
• /
• 2018

Photo-oxidation is one of the main causes of food deterioration of great variety of foods, such as dairy products, nuts, meat products, and wine. It causes a loss of both nutritional value and sensorial quality of products and may even leads to the formation of toxic compounds. Active packaging for food and beverages has been investigated and developed with embedding light absorbers or blocking materials into the plastics. In recent years, several novel light barrier materials have been proposed as an alternative option for different applications. This article reviews the up-to-date technology in light absorber and blocking material with special emphasis on chemical compound and mechanism. Inorganic, organic, hybrid organic-inorganic, and natural light absorbers were scoped. The challenges and future perspectives of light barrier materials are also discussed.

• 대한치과기공학회지
• /
• 제29권1호
• /
• pp.121-131
• /
• 2007

A preparation process's conditions of aqueous sol which contains anatase-type nano titania particles with photocatalyic properties was established by using Yoldas process, so called, DCS(Destabilization of Colloidal Solution) process in this study. And crystal size change and phase transformation of titania particles in aqueous titania sol depending on reaction conditions was investigated by a light scattering method and XRD analysis of frozen dried powders, respectively. This sol with photo catalytic nano titania particles was used to the following hydrophilic hybrid coating film's fabrication and its properties was evaluated. Subsequently, for coating film using the above mentioned aqueous titania sol, non-aqueous titania sol was prepared without any chemical additives and its time stability according to aging time was investigate. By using the above mentioned aqueous titania sol and non-aqueous sol, a complex oxide coating sol for metal and ceramic substrate and a organic-inorganic hybrid coating sol for polymer substrate was prepared and it's hydrophilicity depending on UV irradiation conditions was evaluated. As a conclusions, the following results were obtained. (1)Aqueous titania sol The average particle size of titania in formed aqueous titania sol was distributed between 20$\sim$90nm range depending on reaction conditions. And the crystal phase of titania powders obtained by frozen drying method was changed from amorphous state to anatase and subsequently transformed to rutile crystal phase and it is attributed to concentration gradient in aqueous sol. (2)Non-aqueous titania sol Non-aqueous titania sol was prepared using methanol as a solvent and a little distilled water for hydrolysis and nitric acid as a catalyst were used. The obtained non-aqueous titania sol was stable at room temperature for 20 days. Additionally, non-aqueous titania sol with addition of chealating reagent such as acethylaceton and ethylene glycol prolonged the stability of sol by six months. (3)Complex sol and hybrid sol with super hydrophilicity The above mentioned aqueous titania sol as a main photocataylic component and non-aqueous titania sol as a binder for coating process was used to prepare a complex sol used for metal, ceramic and wood material substrate and also to prepare the organic-inorganic hybrid sol for polymer substrate such as polycarbonate and polyethylene, in which process APMS(3-Aminopropyltrimethoxysilane), GPTS(3-Glycidoxypropyl-trimethoxysilane) as a hydrophilic silane compound and HEMA(2-Hydroxyethyl methacrylate) as a forming network in hybrid coating film were used. The hybrid coating film such as prepared through this process showed a superhydrophilicity below 1$10^{\circ}$ depending on processing conditions and a pencil's hardness over 6 H.

• 한국안전학회지
• /
• 제24권6호
• /
• pp.63-71
• /
• 2009

In order to improve flame retardancy, the halogen free organic melamine phosphate(M-P) flame retardant was synthesized from melamine and phosphoric acid by the reaction of precipitation. The ignition test was carried out preparing hybrid flame retardant compound($H_bFRC$) consisting of organic M-P and inorganic Mg$(OH)_2$ as a flame retardant in the polyolefin resins. The flame retardancy and mechanical properties of flame retardant aluminum composite panel($H_bFRC$-ACP) were performed to investigate the possibility of the composite material, which was contained M-P, as a inner core for $H_bFRC$-ACP. For this study, the results of ignition test indicate that a char formation and drip suppressing effect, and combustion time reduced as the content of M-P increased. The limited oxygen index(LOI) values were measured 17.4vol% and 31.5vol% for LDPE only and $H_bFRC$-3(M-P content: 15wt%), respectively. And it was verified that the $H_bFRC$-3 was needed more oxygen quantity with the increase of M-P content when it combustion. Also, the results from thermogravimetric analysis were observed endothermic peak at $350^{\circ}C$ and $550^{\circ}C$, it was confirmed predominant thermal stability though the wide temperature range by the mixture of M-P and Mg$(OH)_2$. The LDPE-ACP (using only LDPE as a inner core), $35.13kW/m^2$ of heat release rate(HRR) and 13.43MJ/m2 of total heat release(THR) were measured while the $H_bFRC$-ACP, $10.44kW/m^2$ of HRR and 1.84MJ/m2 of THR were measured by results of cone calorimeter test. In case of $H_bFRC$-ACP, the average gas emission amount of CO and $CO_2$ could be decreased down to 25% and 20%, respectively, in comparison with LDPE-ACP. The mechanical properties such as tensile strength, bending strength and adhesion strength of $H_bFRC$-ACP were revealed slightly high values $54N/mm^2$, $152N/mm^2$ and 120N/25mm, respectively, compared with LDPE-ACP. It was confirmed that flame retardancy was improved with the synergy effect because of char formation by M-P and hydrolysis by Mg$(OH)_2$. The result of this study suggest that $H_bFRC$ can be applied for an adequate halogen free flame retardant composite material as a inner core for ACP.

• 접착 및 계면
• /
• 제18권1호
• /
• pp.13-24
• /
• 2017

본 연구에서는 50 wt%의 매우 높은 담지량과 70%의 높은 고형분을 가지면서도 물속이나 다양한 제품에 나노 입자 형태로 분산이 가능한 새로운 형태의 소수성 항균 물질 담지 나노 입자를 제조하였다. 실란 기능화 양친성 고분자 전구체(Alkoxysilane-functionalized Amphiphilic Polymer Precursor; 이하 AAPP)와 다양한 실란 화합물을 이용하여 전형적인 Hydrolytic Sol-Gel 공정으로 제조된 수분산 유-무기 하이브리드 나노 입자들을 제조하고, 이를 이용하여서 나노 침전법을 사용하여서 소수성 항균물질을 고함량으로 담지할 수 있는 새로운 공정으로 소수성 항균물질인 Eugenol이 담지된 유-무기 하이브리드 형태의 나노입자 제조하였다. 나노 입자 제조시 제조 조건의 변화에 따른 나노 입자들의 크기, 담지량, 항균 활성 및 방출거동 등에 영향을 미치는 인자들을 조사하였다. 나노 입자의 종류에 관계없이 Minimal Inhibitory Concentration (MIC)는 50 mg/ml로 동일하였고, 모든 균주에서 99 %에 해당하는 우수한 항균력과 Pseudomonas aeruginosa (PSE)를 제외하고는 2주 이상의 항균 지속력을 나타내었다. 특히, Tetraethoxysilane (TEOS)를 첨가한 경우에는 견고한 무기물 도메인으로 인해 가장 높은 담지량 (50 wt.%)과 서방출 (Sustained release)을 나타내었고, Hexanediol (HD)을 첨가한 경우에는 HD 자체의 항균력과 용매로서의 역할도 하였기 때문에 가장 높은 항균력과 70%의 고형분을 나타내었다.

• 한국산학기술학회논문지
• /
• 제9권5호
• /
• pp.1354-1358
• /
• 2008

본 연구에서는 EU의 6대 유해물질(Pb, Hg, Cd, $C^{+6}$, PBB/PBDE) 규제와 국내 환경부의 환경유해물질 규제법규에 대응할 수 있는 친환경 무독성 난연 도료를 개발하였다. 개발한 도료는 VOC(휘발성유기화합물) 배출이 적어 친환경적이며, 할로겐계를 탈피하여 인체안전성 확보됨과 동시에 검정기술기준(KOFEIS 0201)에 적합한 수용성 유 무기계 복합화합물이다. 유 무기계 난연 복합화합물 제조를 위하여 $Mg(OH)_2$, $Sb_{2}O_{3}$, 붕산아연 등의 난연성 화합물을 사용하였으며 각 화합물의 최적배합 비율은 1: 2: 2였다. 최종적으로 난연 복합화합물을 바인더(마이셀 2%) 및 용제(물)와 1: 0.5: 0.5로 배합하여 난연도료를 제조하여 그 난연 성능을 테스트하였다.

• 한국산학기술학회논문지
• /
• 제15권4호
• /
• pp.2029-2035
• /
• 2014

본 논문은 입상활성탄에 의해서 합성폐수에서의 용존유기탄소의 흡착평형과 회분식 실험을 통해 흡착성질을 파악하고자 하였다. 흡착평형의 새로운 모델식을 제안하였고 이 식을 바탕으로 회분식 실험데이터를 모사하였다. 합성폐수의 유기성분은 Beef extract, Peptone, Humic acid, Tannic acid, Sodium lignin sulfonate, Sodium lauryle sulfate, Arabic gum powder, Arabic acid (polysaccharide), $(NH_4)_2SO_4$, $K_2HPO_4$, $NH_4HCO_3$, $MgSO_4{\cdot}7H_2O$ 등으로 구성되었다. 농도가 낮은 영역 (0~2.5 mg/L)에서는 선형적인 흡착평형을 보여주었고, 농도가 높은 영역 (2.5~6mgl/L)에서는 우호적인 흡착평형을 보여주었다. 사용되어진 생물학적 처리방법에서 나오는 유출수의 합성폐수는 알려진 양으로 준비되어졌다. 흡착평형 모델링은 Freundlich, Langmuir, Sips 및 하이브리드 식을 이용하여 모사하였다. 특히, 선형과 Sips를 이용한 하이브리드 흡착평형식은 낮은 농도와 높은 농도 역에서 매우 좋은 흡착평형식이었다. 용수 및 폐수처리에 활성탄 흡착에 있어서, 선형식과 Sips식을 합친 새로운 하이브리드 식은 새로운 흡착평형식이 될 수 있었다. 하이브리드 흡착평형식 (선형+Sips)을 이용하여 LDFA 운동학적식을 통하여 다양한 흡착제 양에 따른 회분식 반응조에서의 실험데이터를 잘 모사할 수 있었다.