• 한국분말재료학회지
• /
• 제26권6호
• /
• pp.487-492
• /
• 2019

Titanium dioxide (TiO₂) is a typical inorganic material that has an excellent photocatalytic property and a high refractive index. It is used in water/air purifiers, solar cells, white pigments, refractory materials, semiconductors, etc.; its demand is continuously increasing. In this study, anatase and rutile phase titanium dioxide is prepared using hydroxyl and carboxyl; the titanium complex and its mechanism are investigated. As a result of analyzing the phase transition characteristics by a heat treatment temperature using a titanium complex having a hydroxyl group and a carboxyl group, it is confirmed that the material properties were different from each other and that the anatase and rutile phase contents can be controlled. The titanium complexes prepared in this study show different characteristics from the titania-formation temperatures of the known anatase and rutile phases. It is inferred that this is due to the change of electrostatic adsorption behavior due to the complexing function of the oxygen sharing point, which crystals of the TiO₆ structure share.

• ETRI Journal
• /
• 제25권6호
• /
• pp.517-522
• /
• 2003

This investigation confirms that silver stearate consists of an infinite-sheet, two-dimensional, nonmolecular layered structure. Scanning electron microscopy, X-ray diffraction, and infrared spectroscopy reveal the following: plate-like morphology is identified from the SEM image, XRD peaks can be indexed to the (0k0) reflections of a layered structure, and infrared peaks show that alkyl chains are present in an all-trans conformational state with little or no significant gauche population. Based on these structural characteristics, we demonstrate that silver stearate, a prototype of layered organic-inorganic hybrid material, can be grown not only in a designed two-dimensional pattern but also in three-dimensionally ordered ways by using carboxyl-group terminated nanoparticles as a template.

• Elastomers and Composites
• /
• 제50권1호
• /
• pp.35-48
• /
• 2015

Polyhedral oligomeric silsesquioxane (POSS) is an important inorganic-organic hybrid material with a three-dimensional structure. Polyurethane (PU) is a widely applied polymer that has versatile properties with the change of two phase structure. When POSS is incorporated into PU by physical or chemical methods, many properties can be greatly improved, such as mechanical properties, thermal stability, biodegradation resistance, and water resistance. This paper reviews the recent progress in preparation, structure, and performance of POSS-modified polyurethane from the viewpoint of physical blending and chemical modification.

• Bulletin of the Korean Chemical Society
• /
• 제22권12호
• /
• pp.1366-1370
• /
• 2001

Thin films of the SiO2-TiO2-PDMS composite material have been prepared by the sol-gel dip coating method. Acid catalyzed solutions of tetraethoxy silane (TEOS) and polydimethyl siloxane (PDMS) mixed with titanium isopropoxide Ti(OiPr) were used as precursors. The optical and structural properties of the organically modified 70SiO2-30TiO2 composite films have been investigated with Fourier Transform Infrared Spectroscopy (FT-IR), UV-Visible Spectroscopy (UV-Vis), Differential Thermal Analysis (DTA) and prism coupling technique. The films coated on the soda-lime-silicate glass exhibit 450-750 nm thickness, 1.56-1.68 refractive index and 88-94% transmittance depending on the experimental parameters such as amount of PDMS, thermal treatment and heating rate. The optical loss of prepared composite film was measured to be about 0.34 dB/cm.

• Korean Chemical Engineering Research
• /
• 제51권2호
• /
• pp.171-180
• /
• 2013

금속유기구조체(metal-organic frameworks, MOF)는 넓은 비표면적, 규칙적인 구조 및 높게 분산된 금속 성분 등 뛰어난 물리화학적 특성으로 인해 활발한 연구가 이뤄지고 있는 다공성 물질이며, 특히 가스의 흡착, 분리 매체로서 뛰어난 성능이 보고되고 있다. MOF를 이용한 온실가스 이산화탄소의 흡착 연구는 상온 고압 영역에서 이산화탄소 저장 공정과 상온 저압 영역에서 이산화탄소 흡착 공정의 두 범주로 나눌 수 있으며, MOF의 넓은 비표면적 외에도 (1) MOF의 빈 배위결합 자리, (2) MOF의 기능화, (3) MOF의 상호 침투 효과, 및 (4) 이온 교환 효과를 이용한 연구 결과가 보고되고 있다. MOF 물질들은 비교적 낮은 수분 및 열에 대한 안정성이 문제로 제기되고 있으며, 제올라이트 유사 구조체(zeolitic imidazolate frameworks, ZIF) 또는 유기 골격 구조체(covalent organic frameworks, COF) 물질의 이산화탄소 흡착 특성이 거론되고 있다. 본 소고에서는 MOF를 이용한 이산화탄소 흡착에 대한 최근의 연구 결과를 본 연구실의 실험 결과를 중심으로 간략히 소개하고자 한다.

• 한국재료학회지
• /
• 제29권10호
• /
• pp.631-638
• /
• 2019

As automation systems become more common, there is growing interest in functional labeling systems using organic and inorganic hybrid materials. Especially, the demand for thermally and chemically stable labeling paper that can be used in a high temperature environment above $300^{\circ}C$ and a strong acid and base atmosphere is increasing. In this study, a composite coating solution for the development of labeling paper with excellent thermal and chemical stability is prepared by mixing a silica inorganic binder and titanium dioxide. The silica inorganic binder is synthesized using a sol-gel process and mixed with titanium dioxide to improve whiteness at high-temperature. Adhesion between the polyimide substrate and the coating layer is secured and the surface properties of the coating layer, including the thermal and chemical stability, are investigated in detail. The effects of the coating solution dispersion on the surface properties of the coating layer are also analyzed. Finally, it is confirmed that the developed functional labeling paper showed excellent printability.

• 한국전기전자재료학회논문지
• /
• 제21권12호
• /
• pp.1083-1089
• /
• 2008

We studied the dielectric characteristics of low-k SiOCH thin films by Ellipsometry. The SiOCH thin films were prepared by deposition of BTMSM precursors on p-Si wafer by CCP-PECVD method. The nano-porous structural organic/inorganic hybrid-type of SiOCH thin films correlated directly to the formation of low dielectrics close to pore(k=1). The structural groups including highly dense pores in SiOCH thin films originated the anisotropic geometry type of network structure directing to complex refractive characteristics of SiOCH single layer on the p-Si wafer. The linearly polarized beam of Xe-ramp in the range from 190 nm to 2100 nm introduced to the surface of SiOCH thin film, and the reflected beam was Elliptically polarized by complex refractive coefficients of SiOCH dipole groups. The amplitude variation $\Psi$ and phase variation $\Delta$ of the relative reflective coefficients between perpendicular and parallel components to the incident plane were measured by Ellipsometry. The complex optical constants n and k as well as the dielectric constant and thickness of SiOCH thin films were driven by the measured value of $\Psi$ and $\Delta$.

• 한국전기전자재료학회논문지
• /
• 제23권3호
• /
• pp.228-233
• /
• 2010

We studied the optical characteristics correlated with low dielectric constants of low-k SiOCH thin films through ellipsometry. The low-k SiOCH thin films were prepared by CCP-PECVD method using BTMSM(Bis-trimethylsilylmethane) precursors deposited on p-Si wafer. The Si-O-CHx, Si-O-Si, Si-CHx, CHx and Si-H bonding groups were specified by FTIR spectroscopic spectra, and the groups coupled with the nano-porous structural organic/inorganic hybrid-type of SiOCH thin films which has extremely low dielectric constant close to 2.0. The structural groups includes highly dense pore as well as ions in SiOCH thin films affecting to complex refraction characteristics of single layer on the p-Si wafer. The structural complexity originate the complex refractive constants of the films, and resulted the elliptical polarization of the incident linearly polarized light source of Xe-light source in the range from 190 nm to 2100 nm. Phase difference and amplitude ratio between s wave and p wave propagating through SiOCH thin film was studied. After annealing, the amplitude of p wave was reduced more than s wave, and phase difference between p and s wave was also reduced.

• 한국전기전자재료학회논문지
• /
• 제34권1호
• /
• pp.73-77
• /
• 2021

Inorganic-organic hybrid perovskite solar cells have demonstrated considerable improvements, reaching 25.5% of certified power conversion efficiency in 2020 from 3.8% in 2009. In normal structured perovskite solar cells, TiO2 electron-transporting materials require heat treatment process at a high temperature over 450℃ to induce crystallinity. Inverted perovskite solar cells have also been studied to exclude the additional thermal process by using [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) as a non-oxide electron-transporting layer. However, the drawback of the PCBM layer is a charge accumulation at the interface between PCBM and a metal electrode. The impact of bathocuproin (BCP) buffer layer on photovoltaic performance has been investigated herein to solve the problem of PCBM. 2-mM BCP-modified perovskite solar cells were observed to exhibit a maximum efficiency of 12.03% compared with BCP-free counterparts (5.82%) due to the suppression of the charge accumulation at the PCBM-Au interface and the resulting reduction of the charge recombination between perovskite and the PCBM layer.

• 접착 및 계면
• /
• 제2권2호
• /
• pp.20-27
• /
• 2001

투명 플라스틱 중에서 가장 많이 이용되고 있는 재료의 하나로 폴리카보네이트 수지가 알려져 있다. 이 수지는 투명 플라스틱 중에서도 굴절률이 1.584로 유리의 굴절률에 상응하는 수치를 가지고 있어 렌즈, 창소재 등 광학적 용도에 있어서 유리의 대체품으로서 호응이 크다. 그러나 장점에 반하여 표면 경도가 낮기 때문에 마찰에 의해 긁히기 쉽고 용제 등에 대한 내성도 나쁜 편이다. 특히 옥외 창 재료로 사용할 경우에는 자외선의 흡수에 따른 표면의 황변이 심각한 문제가 되어 사용상에 한계를 가지고 있다. 본 연구에서는 실리콘 하드 코팅제의 우수한 내마모성 및 광학 특성을 가지며 또한, 무기 실록산 네트워크에 자외선 흡수 능력을 가진 유기 실란을 도입시켜 폴리카보네이트 수지의 취약한 표면을 효율적으로 보호하면서 내후성 또한 뛰어난 표면 보호 코팅제를 제공하기 위하여 quinine과 3-isocyanato propyl triethoxy silane(3-IPTES) 으로부터 N-triethoxy silyl propyl quinine urethane (TESPQU)을 합성하였다. 이 물질을 methyl triethoxy silane(MTES) 과 공가수분해 후 축합시켜 실록산 네트워크 속으로 도입시켰다. 또한 benzophenone 계통의 자외선 흡수제를 유가실란 축합물에 단순 배합한 경우와 비교하였다. 주사슬에 UV에 안정한 형태의 유가 실란, TESPQU를 도입한 경우 좋은 내후성을 나타냄을 확인할 수 있었다.