• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1806-1809
• /
• 2008

Study that form micro pattern by direct ink jet printing method is getting attention recently. Direct ink jet printing spout fine droplet including nano metal particle by force or air pressure. There is reason which ink jet printing method is profitable especially in a various micro-patterning technology. It can embody patterns directly without complex process such as mask manufacture or screen-printing for existent lithography. In this study, research of a technology that ejects fine droplet form of Pico liter and forms metal micro pattern was carried with inkjet head of piezoelectricity drive system. Droplet established pattern while ejecting consecutively and move on the surface at the fixed speed. Patterns formed in ink are mixed with organic solvent and polymer that act as binder. So added thermal hardening process after evaporate organic solvent at isothermal after printing. I executed high frequency special quality estimation of CPW transmission line to confirm electrical property of manufactured circuit board. We tried a large area printing to confirm application possibility of an ink jet technology.

• 월간포장계
• /
• 통권116호
• /
• pp.88-91
• /
• 2002

• 대한전자공학회논문지SD
• /
• 제47권2호
• /
• pp.7-14
• /
• 2010

본 논문에서는 금속 전극을 미세접촉인쇄방식으로 Ag ink를 이용하여 제작하는데 있어서 접착속도, 분리속도, 접촉시간의 세 가지의 동역학적 파라미터가 잉크 전이율에 미치는 영향을 분석하여 최적의 공정조건을 도출하였다. 잉킹공정에서는 접촉속도는 1 mm/s 이하, 접촉 후 유지시간은 짧게 하며, 분리속도는 1000 mm/s로 빠르게 해야 잉크의 전이율이 98%이상 높았다. 프린팅 공정에서는 반대로 접촉속도는 100mm/s 이상의 빠르게, 접촉 후 유지시간은 30초 이상, 분리속도는 1mm/s 이하로 느리게 할 때 최고의 인쇄특성을 보였다. 이를 이용해 전체 $5cm{\times}5cm$ 면적에 최소 선폭 $30{\mu}m$, 두께는 300~500nm, 50nm이하의 약 $15{\sim}16{\mu\Omega\cdot}cm$ 비저항을 가지는 전극을 인쇄하였다.

• 펄프종이기술
• /
• 제34권1호
• /
• pp.22-29
• /
• 2002

The coated paper was greatly affected by the basic physical properties of the binder as well as the amount of the coating formula. High glass transition temperature (Tg) of the styrene-butadiene (SB) latex, selected as the binder in our study, gave the high stiffness to the coated paper, but lowered the binding force and print gloss. The average particle size of the SB latex also greatly affected to the coated paper so that the smaller particle size improved the rheological property of the coating formula and increased the binding force and print gloss. Another property of the SBR latex, gel content, was important because when its value was small, the latex was easily deformed at the high temperature and increased air permeability to the coated paper. Therefore, the lower gel content consequently resulted in the higher blistering resistance, especially in the web paper. The larger portion of the SB latex in the coated formula improved the binding force and print gloss, but decreased the ink set-off and ink-trapping to the coated paper. The heavier coating improved optical properties such as opacity, paper gloss and paper smoothness, to the coated paper.

• 한국분말재료학회지
• /
• 제20권2호
• /
• pp.120-124
• /
• 2013

This study is carried out to develop the new process for the fabrication of ultra-fine electrodes on the flexible substrates using superhydrophobic effect. A facile method was developed to form the ultra-fine trenches on the flexible substrates treated by plasma etching and to print the fine metal electrodes using conductive nano-ink. Various plasma etching conditions were investigated for the hydrophobic surface treatment of flexible polyimide (PI) films. The micro-trench on the hydrophobic PI film fabricated under optimized conditions was obtained by mechanical scratching, which gave the hydrophilic property only to the trench area. Finally, the patterning by selective deposition of ink materials was performed using the conductive silver nano-ink. The interface between the conductive nanoparticles and the flexible substrates were characterized by scanning electron microscope. The increase of the sintering temperature and metal concentration of ink caused the reduction of electrical resistance. The sintering temperature lower than $200^{\circ}C$ resulted in good interfacial bonding between Ag electrode and PI film substrate.

• 접착 및 계면
• /
• 제14권4호
• /
• pp.167-174
• /
• 2013

본 연구에서는 ink binder용으로 isophorone diisocyanate (IPDI)/polyether polyol/2-hydroxyethyl acrylate (HEA)계 UV 경화형 우레탄 아크릴레이트를 중합하였다. HEA/PETA 혼합 비율을 달리한 조성물의 UV 조사 시간에 따른 광경화거동을 FT-IR spectrophotometer, probe tack tester 및 Photo-DSC로 확인하였다. UV 조사 시간이 증가함에 따라 전환률 및 gel content는 증가하였으며 probe tack은 감소하였다. 반응성 희석제로 사용한 PETA 함량이 증가함에 따라 저장탄성률, 인장강도 및 초기분해 온도가 증가하였다. HEA/PETA 비율이 30/70인 경우 UV 경화 후 PMMA sheet에 대한 부착특성이 가장 우수하였다.

• 한국재료학회지
• /
• 제16권7호
• /
• pp.422-429
• /
• 2006

Studies were performed on preparation of organic-inorganic hybrid silica dye in a dispersing ink system. The silica was subjected to surface modification using 3-aminopropyltrimethoxysilane (APTMS) in order to promote the chemical reactivity of the raw silica. On the surfaces of the aminosilane-functionalised silica, red vinylsulfone-containing azo dye was adsorbed. The dye was found to have chemically reacted with the aminosilane-grafted silica surface, which was proven by FT-IR spectra. Studies on morphology and microstructure were performed employing scanning electron microscopy. The SEM micrographs and particle size distributions showed that a homogeneous pigment can be obtained employing silica as a core. Particle size distribution was also examined using the technique of dynamic light scattering. The ensuing pigment was subjected to various physicochemical evaluation such as inkjet property, storage stability, color change as inkjet ink using printer, spectrophotometric, microscopic techniques. Studies on hybrid dyes from the silica surface demonstrated that, in general, stable pigments for inkjet dispersion ink were obtained.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.595-596
• /
• 2006

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.755-756
• /
• 2009

• 한국결정성장학회지
• /
• 제29권6호
• /
• pp.345-351
• /
• 2019

디지털 잉크젯 프린팅 기술은 고해상도, 빠른 인쇄 속도, 높은 잉크 효율과 같은 장점과 함께 다양한 소재 적용이 용이하여 반도체, 디스플레이, 세라믹 타일 등의 산업 분야에서 주목을 받고 있다. 최근에는 전통적인 잉크 소재에서 벗어나 우수한 내열성, 내광성, 내화학성 등을 보이는 기능성 소재도 잉크젯 프린팅 공정에 적용하려는 시도가 활발히 진행되고 있다. 특히 2차원 인쇄뿐만 아니라 3차원 적층인쇄에 관한 연구도 시작되고 있으며 이를 위해서는 토출되는 잉크의 유변학적 물성과 프린트되는 기판과의 상호작용를 제어하는 것이 필수적이다. 본 연구에서는 나노 실리카 입자가 포함된 광경화성 세라믹 잉크를 합성하고 잉크의 물성과 프린팅 기판의 표면특성을 제어하였다. 나노 실리카 입자가 포함된 광경화성 세라믹 잉크의 퍼짐현상을 억제하고 기판과의 접촉각 특성을 개선함으로써 결과적으로 프린팅 해상도 및 적층성을 향상시켰으며 잉크젯 프린팅을 이용한 광경화 나노 실리카 잉크의 3D 프린팅에 대한 가능성을 확인하였다.