• 한국자동차공학회논문집
• /
• 제6권1호
• /
• pp.43-51
• /
• 1998

Most of fuel-injection system operated with mechanical methods are difficult to control the injection quantity and injection timing as well as injection rate exactly. Moreover high pressure injection scheme is never be realized with conventional one. On the other hand, serious air pollution can be lessened with injection system equipped with those functions. Therefore, electronically controlled Unit Injuctor(UI) appeared to satify above mentioned desires. However, it is still difficult that the most important part, especially solenoid valve, is analyzed precisely, because of the existence of complex combination of electromagnetics, electrics and dynamic problems. In this study, experimental and theoretical analysis are accomplished for understanding of solenoid valve characteristics and further its design. As the result, the follows are obtained 1) As the increase of wire diameter, the response time became shorter and optimal inductance existed in relative with the response time and wire diameter. 2) According to increasing input voltage, the traction force increased, otherwise the response time was shortened. 3) As the increase of armature stroke, the traction force decreased and the response time became longer.

• Journal of Acupuncture Research
• /
• 제15권2호
• /
• pp.97-103
• /
• 1998

Purpose: In order to study the anti-inflammatory and analgesic effects of Bee Venom Therapy, writhing syndrome, carrageenin induced edema, and complete adjuvant induced arthritis were experimented. Methods: 1. We used rats of writhing syndrom induced by acetic acid injection. Group I was treated with Acupuncture therapy. Group II was treated with Bee Venom thearpy. we compared with Group I, II and the control group. 2. We used rats of paw edema induced by carrageenin injection. Group I Was treated with Acupuncture therapy, Group II was treated with Bee Venom thearpy we compared with Group I, II and the control group. 3. We used rats of arthritis induced by Freud's complete adjuvant injection. Group I was treated with Acupuncture therapy, Group II was treated with Bee Venom thearpy we compared with GroupI,II and the control group. Results: 1. Analgesic effects on writhing syndrome induced by acetic acid injection showed statistical significance in Bee Venom treated group as compared with the control group. 2. The paw edema induced by carrageenin injection was decreased with statistical significance in Bee Venom treated group as compared with the control group. 3. The arthritis induced by Freud's complete adjuvant injection wasn't significant. Conclusion: Bee Venom Therapy was effective on inflammatory disease.

• 소성∙가공
• /
• 제16권1호
• /
• pp.25-30
• /
• 2007

The present study covers an integrated simulation method to evaluate optical performance of an aspheric plastic lens by connecting a finite element (FE) analysis of injection molding with a ray tracing simulation. Traditional ray tracing methods have based on the assumption that the optical properties of a lens are homogeneous throughout the entire volume. This assumption is to a certain extent unrealistic for injection-molded plastic lenses because material properties vary at every point due to the injection molding effects. To take into account the effects of the inhomogeneous optical properties of the molded lens, a new.ay tracing scheme is proposed in conjunction with a FE analysis of the injection molding. A numerical scheme is developed to calculate ray paths on every element layer with more realistic information of the refractive indices which can be obtained through the FE analysis. This information is then used to calculate the ray paths based on the FE mesh of which nodal points have unique index values. The proposed tracing scheme is implemented on the tracing of an aspheric lens, and its validity is ascertained through experimental verification.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1383-1388
• /
• 2015

Proportional integral derivative (PID) control is one of the conventional control strategies. Industrial PID control has many options, tools, and parameters for dealing with the wide spectrum of difficulties and opportunities in manufacturing plants. It has a simple control structure that is easy to understand and relatively easy to tune. Injection mold is warming up to the idea of cycling the tool surface temperature during the molding cycle rather than keeping it constant. This “heating and cooling” process has rapidly gained popularity abroad. However, it has discovered that raising the mold wall temperature above the resin’s glass-transition or crystalline melting temperature during the filling stage is followed by rapid cooling and improved product performance in applications from automotive to packaging to optics. In previous studies, optimization methods were mainly selected on the basis of the subjective experience. Appropriate techniques are necessary to optimize the cooling channels for the injection mold. In this study, a digital signal processor (DSP)-based PID control system is applied to injection molding machines. The main aim of this study is to optimize the control of the proposed structure, including a digital PID control method with a DSP chip in the injection molding machine.

• 대한후두음성언어의학회지
• /
• 제28권1호
• /
• pp.25-31
• /
• 2017

Background and Objectives : Though voice therapy is proven to be effective in academia, treatment results and satisfaction level are inconsistent in clinics. The inconsistency may rise from diverse vocal cords misuse patterns in patient population as they suffer from different diseases or have bad phonation habits. In order to overcome the limitation, we uniformized patients' vocal cords with injection laryngoplasty prior to voice therapy. The efficacy of voice therapy and consistency in treatment results after injection laryngoplasty were assessed. Materials and Methods : Patients diagnosed with vocal nodules were either treated with injection laryngoplasty followed by voice therapy (combined treatment group) or voice therapy only (voice therapy group). Each group consisted of 15 patients. Acoustic measures (jitter, shimmer, NHR), aerodynamic measures (MPT, Psub, MAFR), and subjective auditory conscious measures (K-VHI, K-VRQOL) between two groups were analyzed. Results : After treatments, both groups improved in terms of acoustic, aerodynamic, and subjective auditory conscious measures compared to pre-treatment. Combined treatment group had statistically significantly greater improvement in shimmer, P in K-VHI, and PF in K-VRQOL compared to voice therapy group. Conclusion : Injection laryngoplasty treatment prior to voice therapy synergizes in treating patients compared to voice therapy only.

• Reproductive and Developmental Biology
• /
• 제29권4호
• /
• pp.229-234
• /
• 2005

Methods for activation of reconstructed oocytes were examined for the production of nuclear transfer (NT) rat embryos using fetal neural stem cells as donor. Neural stem cells were isolated from Day 14.5 rat fetuses, and the oocytes for recipient cytoplasm were recovered from 4-week old Sprague Dawley rats. After enucleation and nuclear injection, the reconstructed oocytes were immediately exposed to activation medium consisting of 10 mM $SrCl_2$ for 4 h (immediate activation after injection; IAI), or cultured in vitro for $2\~3$ h before activation treatment (injection before activation; IBA). Pre-activated oocytes were also used for NT to test reprogramming potential of artificially activated oocytes. The oocytes were grouped as IIA (immediate injection after activation) and ABI (activation $2\~3$ h before injection). Following NT, the oocytes were cultured in vitro. Development of the NT embryos was monitored at 44 and 119 h after activation. The embryos in groups IAI, mA, and IIA were cleaved to the 2-cell stage at the rates of $36.6\%\;(15/41),\;39.5\%\;(17/43)\;and\;46.3\%$ (25/54), respectively. However, in the ABI group, only one embryo ($1.8\%$, 1/55) was cleaved after activation. After in vitro culture, two NT embryos from IAI group had developed to the morula stage $(4.9\%\cdot2/41)$. However, no morula or blastocyst was obtained in the other groups. These results suggest that immediate activation after injection (IAI) method may be used for the production of rat somatic cell NT embryos.

• Journal of Magnetics
• /
• 제4권2호
• /
• pp.52-54
• /
• 1999

Injection molding is one of the methods to prepare dielectromagnets-permanent magnets made from hard magnetic powder (or from mixture of powders) bonded by dielectric materials. Magnetic properties of dielectromagnets are worse than those of sintered magnets made from the same hard magnetic powders, but this type of the permanent magnet has many advantages. One of them is simpler technology-easier in comparison to the technology of sintered magnets. The injection molded dielectromagnets do not need any final treatment. This technology permits to control magnetic, thermal and mechanical properties of dielectromagnets. The main chracteristics of dielectormagnets are magnetic properties, however mechanical properties have serious influence onto a range of their applications. The main factors shaping mechanical properties have serious influence onto a range of their applications. The main factors shaping mechanical properties of dielectromagnets are the kind and quantity of resin and the technology. The purpose of this investigateion was to find the correlation between infection conditions and the mechanical properties of dielectromagnets. Influence of two parameters of injection, temperature and pressure on mechanical and magnetic properties of dielectromagnets were not significantly changed. Increasing of pressure of injection also does not influence on mechanical properties of analysed samples, however increasing of temperature of injection significantly improved both compression and bending strength.

• 한방재활의학과학회지
• /
• 제30권4호
• /
• pp.133-142
• /
• 2020

Objectives Studies on Chinese herbal injections are increasing. But, its safety are still not well reported. We have reviewed the literature related to the safety of Chinese herbal injection, especially those related to anaphylaxis. Methods The PubMed database was used to select the literatures related to anaphylaxis in China and to study the quality control and safety of Chinese herbal injection. Results Chinese herbal injection is a major traditional medical treatment in China, but it is the cause of adverse drug reactions including anaphylaxis. In order to solve this problem, various proposals have been made to identify the pharmacological and chemical causes of major side effects and to use them safely clinically. In addition, various researches have been conducted from preclinical to postmarketing surveillance to secure the safety of Chinese herbal injection. Based on this, it was found that various efforts are needed to secure the safety of bee sting needles. Conclusion In order to secure the safety of chinese herbal injections, it is necessary to identify the main mechanism of action and the pharmacological components contributing to it, and to develop a standardized formulation based on this. In addition, institutional pharmacovigilance is required.

• 항공우주기술
• /
• 제5권2호
• /
• pp.134-142
• /
• 2006

헬륨분사를 통한 극저온 추진제의 과냉각 방식은 발사체의 이륙 전에 액체산소의 bulk boiling을 억제하고 과냉각 상태를 유지하기 위한 효과적인 방법들 중의 하나이다. 본 자료에서는 이러한 헬륨 분사 냉각 시스템에 대한 이론적 고찰을 통해 열전달과 질량전달 조건을 이해하고, 해석 모델을 제시하였다. 해석 모델의 주요 특징은 유한 열전달과 무한질량전달 개념을 이용하여 분사 시스템을 표현한 것이다. 또한, 실험과 해석결과의 비교를 통하여 해석 모델을 검증하였으며, 헬륨 분사량의 변화, 탱크 압력의 변화 등 조건 변화에 따른 결과를 살펴보았다.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제21권1호
• /
• pp.41-47
• /
• 2021

Background: This study was designed to compare the efficacy of DentalVibe against 2% lidocaine gel in reducing pain during the administration of local anesthetic injection in the adult population. Methods: This was a split-mouth open-label, randomized, controlled clinical study conducted in the Department of Oral and Maxillofacial Surgery of a dental institute. Fifty patients who were scheduled for bilateral dental extractions requiring an inferior alveolar nerve block were enrolled in the study. Site A (n = 50) was coated with 2% lidocaine gel followed by a local anesthetic injection, and DentalVibe with local anesthetic injection was used for Site B (n = 50). The primary outcome was pain, which was recorded immediately after the administration of anesthetic injection using the Visual Analogue Scale [VAS 0 - 10]. Results: The VAS pain scores ranged from 4 to 10 for site A and 0 to 6 for site B. Comparison between the two sites showed a statistically significant difference [Mann-Whitney U test value = 51.50, P < 0.001] favoring site B. Conclusion: This study showed that DentalVibe reduces pain during injection of local anesthesia compared to topical anesthetic gel.