1 |
C. H. Lu and C. C. Tsai, “Adaptive decoupling predictive temperature control for an extrusion barrel in a plastic injection molding process,” IEEE Transactions on Industrial Electronics, Vol. 48, No. 5, 2001, pp. 968-975.
DOI
ScienceOn
|
2 |
D. Gohringer and J. Becker, Proceedings of 2010 IEEE Computer Society Annual Symposium on VLSI (ISVLSI), IEEE, Lixouri, Kefalonia, 2010, pp. 477-478.
|
3 |
S. K. M. Mashhadi, M. Z. Savzevar and J. G. D. Yekan, “Simulation of Temperature Controller for an Injection Mould Machine using Fuzzy Logic,” Journal of mathematics and computer Science, Vol. 7, Iss. 1, 2013, pp. 33-42.
|
4 |
W. M. Chan, L. Yan, W. Xiang and B. T. Cheok, “A 3D CAD knowledge-based assisted injection mould design system,” The International Journal of Advanced Manufacturing Technology, Vol. 22, Iss. 5-6, 2003, pp. 387-395.
DOI
|
5 |
K. S. Lee and J. C. Lin, “Design of the runner and gating system parameters for a multi-cavity injection mould using FEM and neural network,” The International Journal of Advanced Manufacturing Technology, Vol. 27, Iss. 11-12, 2006, pp. 1089-1096.
DOI
|
6 |
Optimal Heater Control in Thermoforming Preheating Using Dual Optimization Steps,” International Journal of Precision Engineering and Manufacturing, Vol. 9, No. 4, 2008, pp. 51-57.
|
7 |
S. C. Chen, W. R. Jong and J. A. Chang, “Dynamic mold surface temperature control using induction heating and its effects on the surface appearance of weld line,” Journal of Applied Polymer Science, Vol. 101, Iss. 2, 2006, pp. 1174-1180.
DOI
ScienceOn
|
8 |
D. Pamela and T. Jebarajan, “Intelligent Controller for Temperature Process,” International Journal of Control and Automation, Vol. 6, No. 5, 2013, pp. 191-198.
DOI
|
9 |
L. S. Coelho, “Tuning of PID controller for an automatic regulator voltage system using chaotic optimization approach,” Chaos, Solitons & Fractals, Vol. 39, Iss. 4, 2009, pp. 1504-1514.
DOI
ScienceOn
|
10 |
J. Vardi and B. Avi-Itzhak, Electric Energy Generation; Economics, Reliability and Rates, The MIT Press, MA, USA, 1981, p.75.
|
11 |
W. C. Chen, G. L. Fu, P. H. Tai, W. J. Deng and Y. C. Fan, Proceedings of 2007 International Conference on Machine Learning and Cybernetics, Vol. 4, IEEE, Hong Kong, China, 2007, pp. 1909-1917.
|
12 |
B. Muñoz-Barron, L. Morales-Velazquez, R. J. Romero-Troncoso, C. Rodriguez-Donate, M. Trejo Hernandez, J. P. Benitez-Rangel and R. A. Osornio-Rios, “FPGA-Based Multiprocessor System for Injection Molding Control,” Sensors, Vol. 12, No. 10, 2012, pp. 14068-14083.
DOI
ScienceOn
|
13 |
D. Kazmer and D. Hatch, “Towards controllability of injection molding,” Journal of Materials Processing and Manufacturing Science, Vol. 8, No. 2, 2000, pp. 127-140.
DOI
|
14 |
S. J. Huang and T. H. Lee, “Fuzzy logic controller fora retrofitted closed-loop injection molding machine,” Proceedings of the Institution of Mechanical EngineersPart I: Journal of Systems and Control Engineering,Vol. 214, No.1, 2000, pp. 9-22.
|
15 |
J. M. Du and Y. X. Luo, Proceedings of 2010 2nd International Workshop on Intelligent Systems and Applications (ISA), IEEE, Wuhan, China, 2010, pp. 1-3.
|
16 |
J. Benitez-Rangel, M. T. Hernandez, L. Morales-Hernandezand A. Dominguez-Gonzalez, “Improvement of the injection mold process by using vibration through a mold accessory,” Materials and Manufacturing Processes, Vol. 25, Iss. 7, 2010, pp. 577-580.
DOI
ScienceOn
|
17 |
B. Nagarajan, R. R. Sathi and P. Vishnuram, “Power Tracking Control of Domestic Induction Heating System using Pulse Density Modulation Scheme with the Fuzzy Logic Controller”, Journal of Electrical Engineering & Technology, Vol. 9, No. 6, 2014, pp. 1978-1987.
DOI
ScienceOn
|
18 |
C.-B. Park, “Thermal Analysis of IPMSM with Water Cooling Jacket for Railway Vehicles”, Journal of Electrical Engineering & Technology, Vol. 9, No. 3, 2014, pp. 882-887.
DOI
ScienceOn
|