• 한국산학기술학회논문지
• /
• 제21권5호
• /
• pp.22-27
• /
• 2020

본 연구는 다수의 사출기가 병렬로 배치된 사출공장의 생산 환경에서 생산성 및 물류효율을 동시에 개선할 수 있는 방법론을 다루고자 한다. 일반적으로 사출공장의 저층부에 위치한 사출기에는 사상 등의 후가공 공정이 연속 배치되어 있고, 후가공을 담당하는 작업자 1~2명이 항시 배치되어 있다. 사출기 앞은 후가공 및 이후 공정으로의 물류 이송작업으로 인해 생산성 저하는 물론이고, 매우 복잡한 물류 흐름이 형성되어 있다. 이에 본 연구에서는 사출기마다 배치되어 있는 후가공 공정을 통합 운영하고, 통합된 후가공 공정에 사출품을 자동 이송하기 위한 컨베이어 구조를 설계하기 위한 방법론을 제안한다. 이를 위해 통합 후가공 공정으로의 투입 컨베이어 구조와 대수를 선정하기 위한 모델 및 각 사출기와 컨베이어를 연결하기 위해 최적의 조합을 찾기 위한 모델을 다룬다. 제안 방법론은 공정의 통합과 물류 방식의 재설계를 통해 생산성을 개선함과 동시에 물류 효율을 높일 수 있는 총합생산성 개선모델이다. 마지막으로 본 연구에서 제안한 방법론을 가전제품 외관에 사용되는 사출품을 생산하는 사출공장을 대상으로 적용하여, 실제 생산 환경에의 적용가능성을 확인함과 동시에 생산성 및 물류효율이 40% 이상 개선됨을 검증하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.916-921
• /
• 2004

The penalty method has been widely applied to analyses of incompressible fluid flow. However, we have not yet found any prior studies that employed penalty method to analyze compressible fluid flow. In this study, with an eye on the apparent similarity between the slight compressible formulation and the penalty formulation, we have proposed a new approximate approach that can analyze compressible packing process using the penalty parameter l. Based on the assumption of the isothermal flow, a set of reference solutions was obtained to verify the validity of the proposed scheme. Furthermore, we have applied the proposed scheme to the analysis of the packing process of different cases.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1394-1397
• /
• 2003

The first thing in developing injection molding and extrusion with microcellular foaming process is to get a grip on one phase state's rheology of gas and polymer solution. Understanding rheology is essential to design mold or die. and it is so important to control the condition of process. Also, this data is got the utmost out of simulation carrying out. In this paper, we will see the measurement of rheology in one phase that mixed polypropylene which contains talc with carbon dioxide of super critical fluid state, and will compare its result with the simulation result.

• 한국레이저가공학회지
• /
• 제6권2호
• /
• pp.35-41
• /
• 2003

In this study, manufacturing of polymer master and mold insert for micro injection molding was investigated. Ablation by excimer laser radiation could be used successfully to make 3-D microstructure of PET. The mechanism for ablative decomposition of PET with KrF excimer laser(λ: 248nm, pulse duration: 5ns) was explained by photochemical process. And this process showed PET to be adopted in polymer master for nickel mold insert. Nickel electroforming by using laser ablated PET master was preferable for replication method. Finally, it was shown that excimer laser ablation can substitute for X-ray lithography of LIGA process in microstructuring.

• 한국분말재료학회지
• /
• 제9권4호
• /
• pp.203-210
• /
• 2002

A new PIM in-process joining technique has been developed for more complicated and functional PIM components by application of the exuded wax from the green compacts during solvent debinding step. At first, various stainless steels and iron compacts with rectangular shape were combined, and the joining behaviors and properties were investigated by shear and tensile test, and microscopic observation. Subsequently, perfect joined three pieces of thin and hollow compacts were obtained for the combination of same and different stainless steels, and it was difficult to join the iron and stainless steel compacts in hydrogen atmosphere because of the different starting temperature of shrinkage. However, pretty good joined iron and stainless steel compacts were obtained by consideration of particle size and vacuum atmosphere. Finally, for the combination of ferro-silicon and austenitic stainless steel compacts, high functionality (magnetic (1.60Tes1a) & non-magnetic) and perfect joint were obtained.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.105-110
• /
• 2005

The penalty method has been widely applied to analyses of incompressible fluid flow. However, we have not yet found any prior studies that employed penalty method to analyze compressible fluid flow. In this study, with an eye on the apparent similarity between the slight compressible formulation and the penalty formulation, we have proposed a modified approximate approach that can analyze compressible packing process using the penalty parameter, which is an improvement on an earlier formulation (KSME, 2004B). Based on the assumption of the isothermal flow, a set of reference solutions was obtained to verify the validity of the proposed scheme. Furthermore, we have applied the proposed scheme to the analysis of the packing process of different cases.

• 한국산학기술학회논문지
• /
• 제16권8호
• /
• pp.5074-5081
• /
• 2015

플라스틱 제품의 휨을 개선하기 위한 방법은 사출성형 공정에서 일어나는 불균일한 냉각을 균일하게 만들어 플라스틱 제품의 잔류응력을 제거하는 방법이다. 본 연구는 균일한 냉각을 위하여 펠티에 소자를 사용하여 급속가열 냉각 장치를 개발하였다. 급속냉각 가열 장치(RCHD)를 제작하여 전통적인 수냉 장치(TWCD)방식과 급속냉각 가열 장치방식에 따른 휨을 비교 분석하였고, 비결정성 수지인 ABS 수지를 사용하였다. 사출성형 조건인 보압시간, 금형온도, 냉각시간, 보압에 따라 휨의 변화량을 측정 비교하였고, 비결정성 ABS 수지에서 급속가열 냉각 장치 냉각방식이 전통적인 수냉방식 보다 휨이 더 적게 발생하고, 위의 결과들로 보아 조금 더 균일하게 냉각되는 것을 알 수 있었다. ABS 폴리머의 분포 상태를 SEM 사진을 통해서 확인하였다. 전통적인 수냉방식은 폴리머의 분포상태가 조밀하게 분포되어 있고, 급속냉각 가열 방식은 전통적인 수냉방식 보다 넓게 분포되어 있었다. 이것은 냉각이 균일하게 이루어지고, 금형의 온도가 서서히 진행되면서 폴리머의 입자가 커지게 되는데, 이것은 내부응력이 줄어든 것을 의미한다.

• 한국기계가공학회지
• /
• 제12권4호
• /
• pp.114-122
• /
• 2013

This study introduces an optimization methodology for the determination of gate location that ensures the melt flow balance within a part cavity of injection mold. A new sequential direct-search scheme based on the recursive reduction of the designer-specified gate design area is developed, and it is integrated with a commercial flow simulation tool for optimization. To quantify the level of melt flow balance, we employ the maximum difference among the fill times for the melt fronts to reach the boundary elements of part cavity as objective function. The proposed methodology is successfully applied in the case study of melt flow balancing in molding of a bar code scanner model. The result shows that the melt flow balance at the optimized gate positions is significantly improved from that for the initial gate position.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.95-98
• /
• 2006

LCD-BLU (Back Light Unit) is one of kernel parts of LCD unit. The fabrication method of a 3-D micro mold patterned with micro-lenses for the LGP (Light Guiding Plate), one of the most important parts of LCD-BLU, was presented. Instead of dot pattern made by etching, 3-D optical pattern design with $50{\mu}m$ micro-lens was applied in the present study. The micro-lens pattern fabricated by modified LiGA with thermal reflow process was applied to the optical design of LGP. The positive micro-lens patterned injection mold with different aspect ratios (i.e. 0.3 and 0.4) was fabricated with modified LiGA with thermal reflow process. The brightness of LCD-BLU increased as aspect ratio of micro-lens increased.

• 한국기계가공학회지
• /
• 제13권1호
• /
• pp.107-114
• /
• 2014

A friction hinge system which moves without power was designed and developed using the principle of friction force, which is caused by interference between the inner diameter of a silicon cap and the outer diameter of a cylindrical roller bearing with one-way rotation in a counterclockwise direction. The system was applied to the lid of buffet ware, which moved up by external force and moved down by gravitational force. However, design conditions which included a rotation angle of the hinge of more than 80 degrees and a closing time of more than 20 seconds were required when the lid of the buffet ware closed due to gravitational force. The design safety of the friction hinge body connected to the lid of the buffet ware from the hinge system was checked on the basis of structural, fatigue and thermal analyses. The material of the shaft, cap and flange among the hinge elements was changed to polyethylene from steel to reduce the weight of the friction hinge system. An injection molding simulation was performed and injection molds of the shaft, cap and flange were created. The weight of the hinge system was decreased from 805g to 219g.