1 |
Malloy, R. A., Plastic Part Design for Injection Molding, pp.40-43, Hanser, 2003.
|
2 |
Pandelidis, I. and Zou, Q., "Optimization of Injection Molding. Part 1: Gate Location Optimization," Polymer Engineering and Science, Vol.30, No.15, pp.873-882, 1990.
DOI
|
3 |
Yao, D. and Kim, B., "Direct-Search-Based Automatic Minimization of Weldlines in Injection-Molded Parts," Polymer-Plastics Technology and Engineering, Vol.37, No. 4, pp.509-525, 1998.
DOI
|
4 |
Zhai, M. et al., "Automated Selection of Gate Location for Plastic Injection Molding Processing," Polymer-Plastics Technology and Engineering, Vol.44, pp.229-242, 2005.
DOI
|
5 |
Shen, C. Y. et al., "Gate Location Optimization in Injection Molding By Using Modified Hill-Climbing Algorithm," Polymer-Plastics Technology and Engineering, Vol.43, No.3, pp.649-659, 2004.
DOI
|
6 |
Park, J. C. and Seong, Y. K., "A Study on Determining Gate Positions for Cavity Fill-Uniformity in Injection Molding Design," J. of the KSMPE, Vol.9, No.6, pp.21-28, 2010.
|
7 |
Park, K. et al., "Application of Design of Experiments and Numerical Analysis to Optimal Design for Injection Molding Processes of Electrical Parts," Trans. of the KSME, A, Vol.26, No.7, pp.1348-1356, 2002.
|
8 |
Deng, Y. M. et al., "Injection Molding Optimization for Minimizing the Defects of Weld Lines," Polymer-Plastics Technology and Engineering, Vol.47, pp.943-952, 2008.
DOI
|
9 |
Zhai, M. and Xie, Y., "A Study of Gate Location Optimization of Plastic Injection Molding Using Sequential Linear Programming," Int'l J. of Advanced Manufacturing Technology, Vol.49, No.1, pp.97-103, 2010.
DOI
|
10 |
Cho, S.B. et al., "Determination of Valve Gate Open Timing for Minimizing Injection Pressure of an Automotive Instrument Panel," Transactions of KSAE, Vol.20, No.4, pp.46-51, 2012.
|
11 |
ED&C, Autodesk Moldflow Insight: The 4th edition of AMI Korean Manual, 2009.
|