• 대한전기학회논문지:전력기술부문A
• /
• 제48권11호
• /
• pp.1394-1400
• /
• 1999

This paper presents and efficient improvement of the iterative eigenvalue calculation method and the selection of initial values in AESOPS algorithm. To determine the initial eigenvalues of the system, system state matrix is constructed with the two-axis generator model. From the submatrices including synchronous and damping coefficients, the initial eigenvalues are calculated by the QR method. Participation factors are also calculated from the above submatrices in order to determine the generators which have a important effect to the specific oscillation mode. Also, the heuristically approximated eigenvalue calculation method in the AESOPS algorithm is transformed to the Newton Raphson Method which is largely used in the nonlinear numerical analysis. The new methods are developed from the AESOPS algorithm and thus only a few calculation steps are added to practice the proposed algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.450-455
• /
• 1993

Guidance commands for attitude controlled missiles inevitably take the form of attitude angle commands. On the other hand, many guidance laws compute the accelerations required to achieve their goals. Therefore some integrators must be in use for the attitude controlled missiles to implement the guidance laws. Naturally, the use of the integrator raises the problem of choosing a proper initial value. In this paper, we compute the integrator initial value which minimizes the terminal miss and show that if the total flight time of the mission is long enough, the "optimal" initial value becomes some multiple of the initial heading error or of the given impact angle to the target. We demonstrate the validity of the analysis by showing some linear and nonlinear simulation results.n results.

• Journal of Information Processing Systems
• /
• 제14권5호
• /
• pp.1293-1300
• /
• 2018

For the disadvantages of multi-scale geometric analysis methods such as loss of definition and complex selection of rules in image fusion, an improved multi-focus image fusion method is proposed. First, the initial fused image is quickly obtained based on the lifting stationary wavelet transform, and a simple normalized cut is performed on the initial fused image to obtain different segmented regions. Then, the original image is subjected to NSCT transformation and the absolute value of the high frequency component coefficient in each segmented region is calculated. At last, the region with the largest absolute value is selected as the postfusion region, and the fused multi-focus image is obtained by traversing each segment region. Numerical experiments show that the proposed algorithm can not only simplify the selection of fusion rules, but also overcome loss of definition and has validity.

• Journal of the Korean Statistical Society
• /
• 제27권1호
• /
• pp.25-55
• /
• 1998

Maximum likelihood estimates (MLEs) for recursive models of categorical variables are discussed under an EM framework. Since MLEs by EM often depend on the choice of the initial values for MLEs, we explore reasonable rules for selecting the initial values for EM. Simulation results strongly support the proposed rules.

• Journal of Information Processing Systems
• /
• 제2권1호
• /
• pp.23-27
• /
• 2006

This paper presents a feature selection technique based on distributional differences for efficient machine learning. Initial training data consists of data including many features and a target value. We classified them into positive and negative data based on the target value. We then divided the range of the feature values into 10 intervals and calculated the distribution of the intervals in each positive and negative data. Then, we selected the features and the intervals of the features for which the distributional differences are over a certain threshold. Using the selected intervals and features, we could obtain the reduced training data. In the experiments, we will show that the reduced training data can reduce the training time of the neural network by about 40%, and we can obtain more profit on simulated stock trading using the trained functions as well.

• 산업기술연구
• /
• 제23권A호
• /
• pp.63-68
• /
• 2003

Non-destructive method by tomography for safety diagnosis of civil engineering and building structures is tried. There are traveltime tomography that uses traveltime and fullwave tomography that uses the initial shock and seismic amplitude. But these methods have difficulty and weak points in accuracy and selection of initial value. In this study, corrected inversion method which is able to solve the two difficulty and this method is applied to theoretical pier model to calculate tomography.

• Membrane and Water Treatment
• /
• 제8권2호
• /
• pp.137-147
• /
• 2017

A water treatment utility in South Korea operates a large system of pressurized hollow fiber membrane (PHFM) modules. The optimal selection of membrane module for the full scale plant was critical issue and carried out using Risk-based Life Cycle Cost (RbLCC) analysis based on the historical data of operation and maintenance. The RbLCC analysis was used in the process of decision-making for replacing aged modules. The initial purchasing cost and the value at risk during operation were considered together. The failure of modules occurs stochastically depending on the physical deterioration with usage over time. The life span of module was used as a factor for the failure of Poisson's probability model, which was used to obtain the probability of failure during the operation. The RbLCC was calculated by combining the initial cost and the value at risk without its warranty term. Additionally, the properties of membrane were considered to select the optimum product. Results showed that the module's life span in the system was ten years (120 month) with safety factor. The optimum product was selected from six candidates membrane for a full scale water treatment facility. This method could be used to make the optimum and rational decision for the operation of membrane water purification facility.

• Journal of information and communication convergence engineering
• /
• 제8권5호
• /
• pp.519-523
• /
• 2010

In Gen-2 RFID system, the initial value of $Q_{fp}$, which is the slot-count parameter of Q-algorithm, is not defined in the standard. In this case, if the number of tags within the reader's identification range is small and we let the initial $Q_{fp}$ be large, the number of empty slot will be large. On the other hand, if we let the initial $Q_{fp}$ be small in spite of many tags, almost all the slots will be collided. As a result, the performance will be declined because the frame size does not converge to the optimal point quickly during the query round. In this paper, we propose a scheme to allocate the optimal initial $Q_{fp}$ through the tag number estimation before the query round begins. Through computer simulations, it is demonstrated that the proposed scheme achieves more stable performance than Gen-2 Q-algorithm.

• Nuclear Engineering and Technology
• /
• 제31권2호
• /
• pp.139-150
• /
• 1999

The swelling pressure of a potential buffer material was measured and the effect of dry density, bentonite content and initial water content on the swelling pressure was investigated to provide the information for the selection of buffer material in a high-level waste repository. Swelling tests were carried out according to Box-Behnken's experimental design. Measured swelling pressures were in the wide range of 0.7 Kg/$\textrm{cm}^2$ to 190.2 Kg/$\textrm{cm}^2$ under given experimental conditions. Based upon the experimental data, a 3-factor polynomial swelling model was suggested to analyze the effect of dry density, bentonite content and initial water content on the swelling pressure The swelling pressure increased with an increase in the dry density and bentonite content, while it decreased with increasing the initial water content and, beyond about 12 wt.% of the initial water content, levelled off to nearly constant value.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제3C권5호
• /
• pp.199-206
• /
• 2003

Numerical solutions to complex characteristic equations are quite often required to solve electromagnetic wave problems. In general, two traditional complex root search algorithms, the Newton-Raphson method and the Muller method, are used to produce such solutions. However, when utilizing these two methods, the choice of the initial iteration value is very sensitive, otherwise, the iteration can fail to converge into a solution. Thus, as an alternative approach, where the selection of the initial iteration value is more relaxed and the computation speed is high, Davidenko's method is used to determine accurate complex propagation constants for leaky circular symmetric modes in circular dielectric rod waveguides. Based on a precise determination of the complex propagation constants, the leaky mode characteristics of several lower-order circular symmetric modes are then numerically analyzed. In addition, no modification of the characteristic equation is required for the application of Davidenko's method.