• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.115-117
• /
• 2005

In this paper, we formed the shallow junction by preamorphization and low energy ion implantation. And a simulator is designed for predicting the annealing process results. Especially, if considered the applicable to single step annealing process(RTA, FA) and dual step annealing process(RTA+FA, FA+RTA). In this simulation, the ion implantation model and the boron diffusion model are used. The Monte Carlo model is used for the ion implantation. Boron diffusion model is based on pair diffusion at nonequilibrium condition. And we considered that the BI-pairs lead the diffusion and the boron activation and clustering reaction. Using the boundary condition and initial condition, the diffusion equation is solved successfully. The simulator is made ofC language and reappear the experimental data successfully.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.764-769
• /
• 2022

The United Arab Emirates is currently building and operating four units of the APR-1400 developed by a South Korean vendor, Korea Electric Power Corporation (KEPCO). This paper attempts to perform APR-1400 reactor core analysis by using the well-known two-step method. The two-step method was applied to the APR-1400 first cycle using the open-source nodal diffusion code, KOMODO. In this study, the group constants were generated using CASMO-4 fuel transport lattice code. The simulation was performed in Hot Zero Power (HZP) at steady-state and transient conditions. Some typical parameters necessary for the Nuclear Design Report (NDR) were evaluated in this paper, such as effective neutron multiplication factor, control rod worth, and critical boron concentration for steady-state analysis. Other parameters such as reactivity insertion, power, and fuel temperature changes during the Reactivity Insertion Accident (RIA) simulation were evaluated as well. The results from KOMODO were verified using PARCS and SIMULATE-3 nodal core simulators. It was found that KOMODO gives an excellent agreement.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.600-602
• /
• 2006

Some abnormal signals diagnostics and analysis through an important equivalent circuits modeling for passive elements under severe accident conditions have been performed. Unlike the design basis accidents, there are inherently some uncertainties in the instrumentation capabilities under the accident conditions. So, the circuit simulation analysis and diagnosis methods are used to assess instruments in detail when they give apparently abnormal readings as an accident alternative method. The simulations can be useful to investigate what the signal and circuit characteristics would be when similar to a variety of symptoms that can result from the environmental conditions such as high temperature, humidity, and pressure condition. In this paper, a new simulator through an analysis of the important equivalent circuits modeling under temperature accident conditions has been designed, the designed simulator is composed of the LabVIEW code as a main tool and the out-put file of the Multi-SIM code as an engine tool is exported to in-put file of the LabVIEW code. The procedure for the simulator design was divided into two design steps, of which the first step was the diagnosis method, the second step was the circuit simulator for the signal processing tool. It has three main functions which are a signal processing tool, an accident management tool, and an additional guide from the initial screen. This simulator should be possible that it could be applied a output signal analysis to some transient signal by variation of the resistance passive elements in the R-L-C equivalent circuit modeling under various degraded conditions in NPPs.

• 교육시설 논문지
• /
• 제22권1호
• /
• pp.37-45
• /
• 2015

Over the years, great attention has been shown to the function of the campus facilities that should be well-equipped, operated and maintained to better support university's two main goals: providing education and supporting research. Properly managing campus facilities is the initial step to be prepared to meet the rapidly changing global educational standard. However, so far, no definitive answer has been given to the question of what service level/scope is appropriate for the effective campus facility management (FM) in Korea. Therefore, at the outset, it is imperative to establish the framework for the standardized campus FM services. The main focus of this research is to provide comprehensive understanding on the campus FM by establishing the framework in the form of FM performance indicator (PI). As the first step, FM standards set by Korean Agency for Technology and Standards (KATS) has been thoroughly reviewed and analyzed to establish the framework for FM standards applicable to campus facility management. Secondly, extensive literature review on the development of performance indicator (PI) for the educational facilities has been conducted to classify PI types and complement FM_KS. Finally, specific guideline and PIs developed by APPA which is globally well-known association in the field of FM for higher education facilities has been added to the combined PI which is the mixed form of FM_KS and PIs from the previous literature. This research provides campus facility managers and FM outsourcing service providers with framework in the form of PI to support future directions of effective campus FM services.

• 전자공학회논문지
• /
• 제54권2호
• /
• pp.47-52
• /
• 2017

본 논문에서는 생체 신호 처리를 위한 중간 속도를 갖는 A/D 변환기 설계를 위하여 1.8V 전원의 CMOS SAR(Successive Approximation Register) A/D 변환기를 설계하였다. 본 논문에서 C-DAC Array의 MSB단을 4분할하여 선형성을 향상시킨 10비트 SAR A/D 변환기 설계를 제안한다. 아날로그 입력이 인가되는 MSB 단의 전하가 충전되는 시간을 확보하여 선형성을 높였다. MSB단이 아날로그 입력을 샘플링하는 블록이기 때문에 초기 값을 보다 정교하게 받아들이는 원리를 통해 선형성을 확보하였다. C-DAC에서 Split 커패시터를 사용하여 면적을 최소화하고, 전력을 감소시켰다. 제안된 SAR A/D 변환기는 0.18um CMOS 공정을 이용하여 설계하였고, 공급 전압 1.8V에서 4MS/s의 변환속도를 가지며, 7.5비트의 ENOB(Effective Number of Bit)이 측정되었다. $850{\times}650um^2$의 면적, 총 전력소모는 123.105uW이고, 170.016fJ/step의 FOM(Figure of Merit)을 확인할 수 있다.

• Advances in environmental research
• /
• 제6권3호
• /
• pp.173-187
• /
• 2017

Heavy metals, such as vanadium, are some of the most toxic types of water contaminants. In this study, vanadium was removed using a new composite adsorbent called BAZLSC. The impacts of pH and initial concentration of vanadium(V) on the elimination effectiveness of this metal by using BAZLSC were investigated in the first step of the study. Vanadium removal increased as pH increased to 3-3.5, and initial concentration increased to 60-70 mg/L. The removal efficiency then decreased. Central composite design and response surface methodology were employed to examine experimental data. Initial concentration of V ($mg.L^{-1}$), pH, and dosage of adsorbent (g/L) were the independent factors. Based on RSM, the removal effectiveness of vanadium was 86.36% at the optimum of initial concentration (52.69 mg/L), pH (3.49), and adsorbent dosage (1.71 g/L). Also adsorption isotherm investigations displayed that the Freundlich isotherm could explain vanadium adsorption by BAZLSC better than the Langmuir isotherm. Beside them, desorption studies showed sorption was slightly diminished after six continuous cycles.

• 구강회복응용과학지
• /
• 제30권1호
• /
• pp.45-52
• /
• 2014

진단과 치료계획의 수립은 건강한 구강조직을 유지하고 구강 내에서 잘 기능하는 국소의치 제작을 위한 치료의 시작이며 치료예후를 좌우하는 매우 중요한 요소이다. 국소의치 환자들은 잔존치아의 수나 결손부의 위치, 교합상태, 구강조직의 건강 상태 등 여러 요소에 의해 환자마다 다양한 구강 조건을 가지고 있으므로, 각각의 환자에 맞는 국소의치 제작을 위해서는 진단과 치료계획을 수립하는 단계에서 충분한 정보를 취득하는 과정이 필요하다. 특히, 방사선 사진이나 진단모형의 분석을 통해 국소의치의 지대치를 선정하고 모형의 써베잉을 시행하여 구강형성여부와 보철물의 생역학적 설계를 결정하는 것은 성공적인 국소의치 치료를 위한 필수요건이므로 이러한 과정을 이해하고 임상적으로 적용할 수 있어야 한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제18권4호
• /
• pp.843-859
• /
• 2024

The university course scheduling problem (UCSP) aims at optimally arranging courses to corresponding rooms, faculties, students, and timeslots with constraints. Previously, the university staff solved this thorny problem by hand, which is very time-consuming and makes it easy to fall into chaos. Even some meta-heuristic algorithms are proposed to solve UCSP automatically, while most only utilize one single algorithm, so the scheduling results still need improvement. Besides, they lack an in-depth analysis of the inner algorithms. Therefore, this paper presents a novel and practical approach based on Tabu search and simulated annealing algorithms for solving USCP. Firstly, the initial solution of the UCSP instance is generated by one construction heuristic algorithm, the first fit algorithm. Secondly, we defined one union move selector to control the moves and provide diverse solutions from initial solutions, consisting of two changing move selectors. Thirdly, Tabu search and simulated annealing (SA) are combined to filter out unacceptable moves in a parallel mode. Then, the acceptable moves are selected by one adaptive decision algorithm, which is used as the next step to construct the final solving path. Benefits from the excellent design of the union move selector, parallel tabu search and SA, and adaptive decision algorithm, the proposed method could effectively solve UCSP since it fully uses Tabu and SA. We designed and tested the proposed algorithm in one real-world (PKNU-UCSP) and ten random UCSP instances. The experimental results confirmed its effectiveness. Besides, the in-depth analysis confirmed each component's effectiveness for solving UCSP.

• 경영과정보연구
• /
• 제22권
• /
• pp.211-229
• /
• 2007

The ISO/TS16949 APQP goal of defect prevention and decrease of spread waste, is the customer satisfaction which leads a continuous improvement and profit creation. The quality expense where the most is caused by but with increase of production initial quality problem occurrence is increasing to is actuality. Like this confirmation amendment. with the problem which is forecast in the place development at the initial stage which it does completeness it does not confront not to be able, production phase to be imminent, the problem accumulates and it talks the development shedding of which occurs. In opposition, prediction confrontation. is forecast in development early stage to and it is a structure which does not occur a problem to production early stage. Like this development is a possibility of accomplishing competitive company from production phase. Which attains an goal of, chance cause it leads a APQP activity (common cause) with special cause prevention & detection the connection characteristic of the focus technique against a interaction is important. And the customer requirement satisfaction and must convert a APQP goal of attainment at the key characteristics action step. (1) The Prevention - with Design FMEA application prevention of the present design management/detection, (2) the Detection (prevention/detection) - with Process FMEA application prevention of the present process control/detection, (3) Special Cause - statistical process control (SPC) 4M cause spread removal, (4) Common Cause - statistical process control (SPC) the nothing zero defect which leads the continuous improvement back of spread with application it will be able to attain with application.

• 시스템엔지니어링학술지
• /
• 제11권2호
• /
• pp.61-73
• /
• 2015

The early-phase naval ship design demands requirements synthesis rather than design synthesis, which conducts engineering design for several domains on a detailed level. Requirements synthesis focuses on creating a balanced set of required operational capabilities satisfying user's needs and concept of operations. Requirements are evolved from capability based languages to function based language by statistical exploration and engineering design which are derived in the following order: concept alternative, concept baseline, initial baseline and functional baseline. The early-phase naval ship design process can be divided into three passes: concept definition, concept exploration and concept development. Main activities and outcomes in each pass are shortly presented. Concept definition is the first important step that produces a concept baseline through extensive design space exploration promptly. Design space exploration applies a statistical approach to explore design trends of existing ships and produce feasible design range corresponding to concept alternative. It further helps naval systems engineers and operational researchers by inducing useful responses to user and stakeholders' questions at a sufficient degree of confidence and success in the very early ship design. The focus of this paper is on the flow of design space exploration, and its application to a high-speed patrol craft. The views expressed in this paper are those of the authors, and do not reflect the official policy or rule of the Navy.