• 제목/요약/키워드: Initial Cost

검색결과 1,562건 처리시간 0.024초

최소비용문제의 해법 효율화와 통합구현 (Performance Improvement and Integrated Implementation for Minimum Cost Flow Problem)

  • 정호연
    • 산업경영시스템학회지
    • /
    • 제20권43호
    • /
    • pp.67-79
    • /
    • 1997
  • In this paper we develop the integrated software that can compare algorithms of the minimum cost flow problem using PC. The chosen algorithms are the network simplex method, dual network simplex method, and out-of-kilter method, which methods correspond to primal, dual, and primal-dual approach respectively. We also present the improved methods obtaining the initial solution to increase the efficiency of algorithms, and experiment results shown the difference between the entering(dropping) selection rules.

  • PDF

저급 관성센서를 이용한 독립적인 관성항법시스템에 관한 연구 (A Study on the Stand-alone Inertial Navigation System with low-cost Inertial Sensors)

  • 조재범;이자성
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 D
    • /
    • pp.2270-2273
    • /
    • 2001
  • This paper presents calibration and alignment algorithms for low-cost inertial sensors. The error models for gyro and accelerometer are presented with a study of their effects. A navigational Kalman Filter is derived based on those error models. Test results are presented, which shows the initial calibration and alignment scheme and the proposed filter configuration effectively reduce the drift of the sensors and provide improved accuracy for its practical use for navigation.

  • PDF

관상동맥질환 치료를 위한 시롤리무스 방출 스텐트 ($CYPHER^{TM}$)의 경제성 분석 (Economic Value of the Sirolimus Eluting Stent($CYPHER^{TM}$) in Treating Acute Coronary Heart Disease)

  • 이후연;박은철;박기동;박지은;김영;이상수;강혜영
    • Journal of Preventive Medicine and Public Health
    • /
    • 제36권4호
    • /
    • pp.339-348
    • /
    • 2003
  • Objective : To quantify the economic value of the Sirolimus fluting Stent ($CYPHER^{TM}$) in treating acute coronary heart disease (CMD), and to assist in determining an adequate level of reimbursement for $CYPHER^{TM}$ in Korea. Methods : A decision-analytical model, developed by the Belgium Health Economics Disease Management group, was used to investigate the incremental cost-effectiveness of $CYPHER^{TM}$ versus conventional stenting. The time horizon was five years. The probabilities for clinical events at each node of the decision model were obtained from the results of large, randomized, controlled clinical trials. The initial care and follow-up direct medical costs were analyzed. The initial costs consisted of those for the initial procedure and hospitalization, The follow-vp costs included those for routine follow-up treatments, adverse reactions, revascularization and death. Defending on the perspective of the analysis, the costs were defined as insurance covered or total medical costs (=sum of insurance covered and uncovered medical costs). The cost data were obtained from the administrative data of 449 patients that received conventional stenting from five participating Korean hospitals during June 2002. Sensitivity analyses were peformed for discount rates of 3, 5 and 7%. Since the major clinical advantage of $CYPHER^{TM}$ over conventional stenting was the reduction in the revascularization rates, the economic value of $CYPHER^{TM}$, in relation to the direct medical costs of revascularization, were evaluated. If the incremental cost of $CYPHER^{TM}$ per revascularization avoided, compared to conventional stenting, was no higher than that of a revascularization itself, $CYPHER^{TM}$ would be considered as being cost-effective. Therefore, the maximum acceptable level for the reimbursement price of $CYPHER^{TM}$ making the incremental cost-effectiveness ratio equal to the cost of a revascularization was identified. Results : The average weighted initial insurance covered and total medical costs of conventional stenting were about 6,275,000 and 8,058,000 Won, respectively. The average weighted sum of the initial and 5-year follow-up insurance covered and total medical costs of conventional stenting were about 13,659,000 and 17,353,000 Won, respectively. The estimated maximum level of reimbursement price of $CYPHER^{TM}$ from the perspectives of the insurer and society were $4,126,897{\sim}4,325,161$ and $4,939,939{\sim}5,078,181$ Won, respectively. Conclusion : By evaluating the economic value of $CYPHER^{TM}$, as an alternative to conventional stenting, the results of this study are expected to provide a scientific basis for determining the acceptable level of reimbursement for $CYPHER^{TM}$.

고객만족과 전환비용이 지속적 이용의도에 미치는 영향에 관한 연구 : 치과 병.의원을 중심으로 (A Study on the Effect of Customer Satisfaction and Switching Cost on Continuous Use Intention: Focusing on Dental Hospitals and Clinics)

  • 변정아;나율;김양균
    • 한국병원경영학회지
    • /
    • 제17권2호
    • /
    • pp.52-72
    • /
    • 2012
  • In this study, we examined the effect of customer satisfaction and switching cost on continuous use intention to suggest how organizations can retain their customers when market growth slows down and competition becomes stronger. We carefully developed and modified survey instruments through a pre-test, and subsequently surveyed 432 dental care users in Seoul and Busan areas. As a result of regression analysis, higher procedural learning switching cost, relational switching cost, and customer satisfaction were manifested in the increased continuous use intention. In contrast, higher financial switching cost and customer satisfaction with insufficient effort for information acquisition led to decreased switching intention. In addition, procedural initial switching cost and residents in Seoul led to increased switching intention. Understanding continuous use intention and switching intention is important for healthcare institutions striving to maintain market position. The findings of this study suggest a paradigm shift from conventional transactional marketing to strategic relational marketing to be effective in the healthcare environment today.

  • PDF

신재생 에너지와 기존 발전기술과의 투자리스크 요인별 민감도 비교 (The Sensitivity Comparison of Each Risk Factors Analysis on Renewable Energy and Other Generating Technologies)

  • 고경호;박세익
    • 신재생에너지
    • /
    • 제7권4호
    • /
    • pp.10-17
    • /
    • 2011
  • Recently, electricity industry is facing high market uncertainty which has ever had and which increase risks in power market. In this study, we analyze risk factors such as discount rates, initial investment (overnight cost), plant factor, fuel cost, carbon price, etc, for the perspective of investor. For the analysis of risk factors, we used LCOE method. The results of this study show that renewable energy is more affected by plant factor and overnight cost than other risk factors. First, Renewable energy has higher proportion of overnight cost in the total investment than that of other technologies. Second, renewable energy is free of fuel cost and carbon price so plant factor is the most important factor, in other words, competitiveness of renewable energy depends on plant factor. Furthermore, we conducted economic feasibility of wind power and PV in domestic case study. The minimum requirement condition to get profitability is that plant factor 15% and overnight cost \6,000,000/kW and 26%, \2,200,000/kW for PV and Wind Power, respectively.

신·재생에너지 공급의무화제도(RPS) 비율을 고려한 타당성 분석의 공사비 산정 프로세스 (Process of Cost Estimation in Feasibility Analysis Considering ratio of Renewable Portfolio Standard)

  • 양현주;김종협;한상원;현창택
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2014년도 춘계 학술논문 발표대회
    • /
    • pp.44-45
    • /
    • 2014
  • Recently the Korean government also has strictly restricted a law such as GBCC(Green Building Certification Criteria)and RPS(Renewable Portfolio Standard) on the construction. Especially the government announced a obligation of renewable energy consumption over 12% for all the public buildings of total area over 1,000㎡ since 2014. Regarding to the policy, this study presented the economics of energy analysis of the public office buildings that supplies 12% renewable energy output in the early stage of construction project. This paper calculated on CO2 emission by the geothermal, solar heat, and solar photovoltaic system and estimated the saving cost. Reduced cost through the energy saving are predicted to influence on the total construction cost. As a result air pollution and energy saving cost are expected that renewable energy system would be saving total initial cost of construction on planning phase.

  • PDF

전기충전소의 경제적 운영을 위한 독립발전 시스템 설계 (Independent Generation System Design for the Economic Management of Electrical Charging Stations)

  • 서진규;김규호;이상봉
    • 전기학회논문지
    • /
    • 제64권2호
    • /
    • pp.222-227
    • /
    • 2015
  • This paper presents the optimal energy generation systems for economical EVs(Electric Vehicles) charging stations located in an island area. The system includes grid electricity, diesel generator and renewable energy sources of wind turbines and PV(Photovoltaic) panels. The independent generation system is designed with data resources such as annual average wind speed, solar radiation and the grid electricity price by calculating system cost under different structures. This sensitive analysis on the varying data resources allows for the configuration of the most economical generation system for charging stations by comparing initial capital, operating cost, NPC(Net Present Cost) and COE(Cost of Energy). Depending on the increase of the grid cost, the NPC variation of the most economical system which includes renewable energy generations and grid electricity can be smaller than those of other generation systems.

Measuring a Value of Contract Flexibility in the Third-Party Warehousing

  • Park, Chul-Soon;Kim, Bo-Won
    • Management Science and Financial Engineering
    • /
    • 제15권1호
    • /
    • pp.1-31
    • /
    • 2009
  • This paper considers the value of warehousing contract under probabilistic demands. We consider a supply chain consisting of a supplier, a retailer and its third-party warehousing partner who provides the warehousing service to the retailer through an outsourcing contract. A typical contract is specified by initial space commitment and modification schedule. The retailer decides the order quantity for the supplier and space commitment for the outsourcing contract. Since there is close relationship between order quantity and space commitment to minimize the total cost including ordering cost, inventory carrying cost, shortage cost, and warehousing cost, we develop an analytical model under probabilistic demands, where the retailer can determine the optimal order size and space commitment level jointly. We found the closed-form optimum for a single-period case and the optimal conditions for a two-period case. To evaluate the value of contract flexibility for the two-period case, we compared the total cost under two policies; one with modification, under which the base commitment can be changed at the start of each period and the other without modification. From results of our numerical analysis, we showed that the modification policy is more cost-effective as the variability of demand increases.

강상자형교의 생애주기비용 최적설계 (Life-Cycle Cost Optimization of Steel Box Girder Bridges)

  • 조효남;민대홍;권우성
    • 한국전산구조공학회논문집
    • /
    • 제15권4호
    • /
    • pp.557-566
    • /
    • 2002
  • 본 논문에서는 강상자형교의 바닥판과 주형에 대한 생애주기비용(Life-Cycle Cost : LCC)를 고려한 최적설계 방법을 제안하였다. 생애주기비용의 최적설계 문제는 초기비용, 유지관리비용 그리고 강도와 처짐 그리고 균열에 대한 파손 기대비용의 최소화 문제로 정식화할 수 있다. 기존의 재래적인 설계방법과의 비교를 동해서 강상자형교의 생애주기비용 최적설계의 우수성을 입증하였다. 또한 수치적인 결과의 고찰을 통하여 LCC에 근거한 최적설계가 여타의 설계방법들보다 좀 더 합리적이고 경제적이며 안전한 설계를 유도하는 것으로 분석되었다.

LMC 교면 포장 공법의 생애주기비용분석에 관한 연구 (A Study on Life Cycle Cost Analysis of Latex Modified Concrete Pavement for Bridges)

  • 조효남;최현호;정평기;임종권
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제5권4호
    • /
    • pp.185-195
    • /
    • 2001
  • Latex Modified Concrete(LMC) has been widely used for the pavement of highway bridges over the past 35years around the world since it is more resistant to the intrusion of chloride ions, has higher tensile, compressive, and flexural strength, and has greater freeze-thaw resistance. However, in Korea, it has not been introduced to fields due to higher initial construction cost for its overlay compared with that of conventional pavement materials. Due to durable characteristics, it should be noted that the LMC may be more cost-effective than conventional pavements such as asphalt pavement, when life-cycle cost(LCC) concept is considered. The objective of this study is intended to suggest a practical LCC analysis model for pavement projects and to demonstrate relative cost-effectiveness of the LMC overlays in comparison with conventional pavement techniques. It may be stated that the procedure proposed in this study may be utilized for making optimal decision on cost-effective pavement design.

  • PDF