• 대한치과보철학회지
• /
• 제44권5호
• /
• pp.606-616
• /
• 2006

Purpose: This experiment examined the effect of different surface treatment on the osseointegration and stability of implants. Material and methods: In this study, 40 each of machined, SLA and RBM implants, which are the most commonly used implants, were implanted into the tibia of 20 normal rabbits using $OsseoCare^{TM}$. The rabbits were sacrificed after 1 week, 4 weeks, 8 weeks and 12 weeks for implant stability analysis, removal torque analysis, histologic and histomorphometric analysis. Result : ISQ showed significant difference between Machined and RBM at first week and at 4 weeks. There was significant difference between Machined and both SLA and RBM(p<0.05) but after 8 weeks there were no significant difference between each group. In the removal torque, RBM showd significantly higher values than SLA and Machined surface at 1st week. At 4th and 12th week, there was significant difference between Machined and SLA, RBM(p<0.05). In the bone to implant contact variable, there was no significant difference between each surface treatment method. In the Machined surface group, there was no significant difference between each time interval. but in SLA group, there were significant differences between the 1st week and 12th week and in RBM group, there were significant differences between the 1st week and 8th, 12th week and between 4th and 12th week(p<0.05). The bone area showed significantly higher values in SLA and RBM compared to Machined surface 1st and 8th week and significantly higher values in SLA than Machined surface at the 4th week(p<0.05). Conclusion: The roughened surface of implants showed positive effect in the early stages of implantation and assisted in bone formation After the bone formation stage, there was no statistical difference between Machined and roughened surface groups. In dental implantation, where initial stability is critical to the success of implants, the use of roughened surface implants should assist in reducing the healing period after implantation.

• Journal of Yeungnam Medical Science
• /
• 제10권2호
• /
• pp.409-416
• /
• 1993

이상에서와 같이 lithium치의 측정에 있어서 본 병원에서 기존 이용하던 AAS법이나 ISE법 모두 정밀도나 직선성 평가에 있어 비교적 좋았으나, 정밀도(재현성)에 있어서 ISE법이 AAS법보다 더 우수한 것으로 나왔고 ISE법의 경우 측정방법이 매우 간편하였다. 그러나 ISE법에 의한 혈중 측정치가 AAS법에 의한 것보다 다소 높게 나타났으며, ISE법이 AAS법에 비하여 분석 최하한치가 더 높아 예민도는 상대적으로 낮았다.

• 한국인터넷방송통신학회논문지
• /
• 제18권2호
• /
• pp.217-226
• /
• 2018

차량의 측면은 전면이나 후면과 다르게 비대칭으로 설계되어있기 때문에 측면충돌이 일어나는 경우 충돌부위에 따라 차체의 변형정도가 크게 달라진다. 충돌로 인하여 차체에 탄성 및 소성 변형이 일어날 때 운동에너지가 차체로 흡수되어 운동량이 감소하게 된다. 일반적으로 교통사고분석은 충돌 후 차량의 거동을 운동량 보존법칙으로 분석하며 차체의 변형에 따른 에너지 흡수량은 반발계수를 적용해 그 오차를 보정한다. 본 연구에서는 차체의 구조와 각 부품의 재료특성을 적용한 유한요소 차량모델을 LS-DYNA로 해석하였으며, 그 결과를 분석하여 SUV와 승용차의 측면충돌에서 차량의 접촉부위에 따른 반발계수와 충돌감지시간을 도출하였다. 최종적으로 산출된 반발계수와 충돌감지시간을 실제 교통사고 사례에 적용하였을 때 결과오차의 개선효과를 얻었다. 유한요소해석 모델을 이용하여 도출한 초기 입력값을 적용했을 때 기존의 분석기법보다 해석의 신뢰도가 높다는 결과를 얻게 되었다.

• 대한화장품학회지
• /
• 제40권1호
• /
• pp.95-108
• /
• 2014

화장품은 일반인이 장기간 연용하는 제품으로 인체 피부에 대한 안전성이 매우 중요하다. 화장품에 의한 접촉피부염은 자극성 물질이 피부에 접촉 후 침투하여 유발하는 염증반응으로 활성화된 면역세포에서 염증을 매개하는 다양한 인자를 분비함으로써 시작된다. 본 연구에서는 국산 생약 추출물을 이용하여 RAW264.7 대식 세포에서 염증 관련 인자에 대한 영향을 통해 항염증 활성을 스크리닝 하였다. 51종의 국산 생약 추출물 중 측백, 측백엽(초), 향부자, 형개, 동과자, 산약, 산약(초), 상지, 송절, 택사의 에탄올 추출물 10종이 lipopolysaccharide(LPS)에 의해 유도된 세포독성을 감소시킴과 동시에 염증 관련 인자인 Nitric oxide (NO), interleukin (IL)-1${\beta}$, IL-6, tumor necrosis factor (TNF)-${\alpha}$의 생성을 억제하는 것을 확인하였다. 또한, 이들 생약 추출물은 인체피부에서도 자극을 유발하지 않음을 인체 첩포시험을 통해 검증하였다. 따라서, 항염증 활성이 확인된 10종 국산 생약 추출물은 피부 자극을 예방할 수 있는 화장품 소재로서의 활용이 가능할 것으로 사료된다.

• 공업화학
• /
• 제24권3호
• /
• pp.327-332
• /
• 2013

입상 활성탄에 대한 bismarck brown R의 흡착평형, 동력학 및 열역학 파라미터들을 회분식 실험을 통해 살펴보았다. 조작변수로서 초기농도, 접촉시간과 흡착온도의 영향을 조사하였다. 흡착평형자료는 선형회귀법을 사용하여 Langmuir와 Freundlich 흡착등온식에 대한 적합성을 평가하였다. 흡착평형은 Freundlich 흡착등온식이 더 잘 맞았으며, 계산된 분리계수(1/n) 값으로부터 입상 활성탄이 bismarck brown R을 효과적으로 처리할 수 있다는 것을 알 수 있었다. 동력학적 실험으로부터, 흡착공정은 유사이차반응속도식에 잘 맞으며, 속도상수($k_2$) 값은 온도가 증가할수록 증가하였다. 활성화에너지, 엔탈피, 엔트로피 및 Gibbs 자유에너지변화와 같은 열역학 파라미터들은 흡착공정의 특성을 평가하기 위하여 298~318 K의 온도 범위에서 조사하였다. 활성화 에너지의 계산값은 100 mg/L에서 8.73 kJ/mol로 입상 활성탄에 대한 bismarck brown R의 흡착이 물리적 공정임을 나타냈다. Gibbs 자유에너지변화의 음수값(${\Delta}G$ = -2.59~-4.92 kJ/mol)과 엔탈피변화의 양수값(${\Delta}H$ = +26.34 kJ/mol)은 흡착공정이 자발적이며 흡열과정으로 일어난다는 것을 나타냈다.

• 여성건강간호학회지
• /
• 제1권1호
• /
• pp.5-27
• /
• 1995

One of the important tasks for new parents, especially mothers, is to establish warm, mutually affirming interpersonal relationships with the new baby in the family, with the purpose of promoting the health development of the child and the well-being of the whole family. Nurses assess the quality of the behavioral characteristics of the maternal-infant interaction. The purpose of this longitudinal descriptive correlational study is to investigate the changes of the mother - infant interactions from postpartum 1 day to postpartum 8weeks of the transition to parenthood. The aim was to contribute to the development of theoretical under standing on which to base care toward promoting the quality of maternal - infant interaction. Data were collect ed directly by the investigator and at rained from Jul, 1, 1990 to Jun 8, 1991, Subjects were a random sample of 44 mothers, 44 who had a normal delivery (but with out other perinatal complications) at four general hospitals in Seoul. Instruments used were the Stainton Parent-infant Interaction Scale (1981). The first observations were made in the delivery room, followed by day 1, day 2, day 3 and 2 weeks, 4 weeks, 6 weeks and 8 weeks after, birth, for a total of 8 contacts. Observations in the hospital were made during the hour prior to scheduled feedings. The infant was placed beside the mother. Later contacts were made at home. Data analysis was don by computer using as SPSS program and included, Paired t-test, t-test and Pearson Correlation coefficient ; the results were as follows. 1. The daily maternal-infant interaction score for the initial contact ofter birth to 8 weeks postpartum had the lowest average score 5.21 and the highest 8.02(in a range of 0-10). This subject group of mothers needed Extra nursing supporting to promote their maternal-infant interaction. 2. The daily scores for the maternal-infant interaction tended to rise, showing a gradual improvement over the period of eight weeks. However, there were significantly different increases in maternal-infant interaction only from the first to second day (p=0.000) and from the fourth to sixth weeks ofter birth.(p=0.000) 3. When the seven items of maternal-infant interaction were evaluated items of maternal-infant inter action were evaluated separately, "Care taking for the baby" had the highest average score, 1.60(in a range of 0-2) and "Speaks to baby" the lowest, 0.8. All items, suggested the subjects' need of nursing intervention to promote maternal-infant interaction 4. There were positive correlations between certain general characteristics, namely, both a higher economic status (p=0.027) and breast feeding (p=0.021) and maternal-infant interaction.

• 마케팅과학연구
• /
• 제18권4호
• /
• pp.277-306
• /
• 2008

Knowledge1 is considered to be a key element of understanding how organizations gain and sustain competitive advantages. But very few firms are capable of creating the requisite knowledge and thus, firms should acquire and exploit new knowledge through knowledge transfer processes. The empirical part of this study involves examining relationships among adaptability of knowledge and knowledge transfer and marketing performance and testing the moderating roles of absorptive capacity, socialization and local marketing knowledge. This study is organized as follows: (1) Previous literature on knowledge, knowledge transfer and absorptive capacity is summarized, followed by the development of hypotheses derived from the knowledge-based view and absorptive capacity. (2) The hypotheses are tested with data collected from MNCs' subsidiaries performing marketing activities in Korea.Thestudyisclosedwithfindings,implications,andconclusions. Following six research hypotheses are drawn from literature review in related areas: H1: Adaptability of knowledge transferred from the MNCs' headquarters and other subsidiaries is positively associated with knowledge inflows into the receiving subsidiary. H2: The level of marketing knowledge transferred from the MNCs' headquarters and other subsidiaries is positively associated with marketing performance of the receiving subsidiary. H3: Increases in potential absorptive capacity will enhance the relationship between adaptability of knowledge and the level of marketing knowledge transfer. H4: Increases in realized absorptive capacity will enhance the relationship between the level of knowledge transfer and marketing performance of the receiving subsidiary. H5: Increases in socialization activity among the headquarters and subsidiaries will enhance the relationship between adaptability of knowledge and the level of marketing knowledge transfer. H6: Increases in the level of locally developed marketing knowledge will enhance the relationship between the level of knowledge transfer and marketing performance of the receiving subsidiary. The research framework that illustrates the proposed hypotheses is presented in figure 1. The unit of analysis for this study is knowledge transfer from the MNCs' headquarters and other subsidiaries to their subsidiaries operating in South Korea. The population for this study consists of subsidiaries established either as joint ventures or as wholly-owned subsidiaries. A group of 603 foreign firms were drawn from diverse industry organizations and business societies. After personal contact, telephone, fax, and e-mail to request that the respondents complete the questionnaire, 282 valid questionnaires from 133 initial sample companies were collected. The results of the empirical analyses significantly support all of the proposed hypotheses except hypothesis 3. Adaptability of external knowledge promotes knowledge transfer and the relationship is moderated by a firm's potential knowledge absorptive capacity. On the other hand, knowledge transfer improves a firm's marketing performance and a firm's realized knowledge absorptive capacity and local marketing knowledge moderate the relationship. The theoretical and practical implications of the findings in this study are as follows: (1) firms must take seeking, transferring, sharing and exploiting of external knowledge into serious consideration, while simultaneously creating knowledge to support the necessary business operations, remain competitive, and achieve superior performance. (2) Firms should continuously seek to develop their knowledge absorptive capacity (both potential and realized capacity) to absorb, learn and utilize valuable external knowledge. (3) Firms should emphasize not only absorptive capacity, but also development of local knowledge. Firms with strong absorptive capability and local knowledge can learn and transfer more external knowledge, which can be translated into greater levels of competence and performance.

• Korean Chemical Engineering Research
• /
• 제44권1호
• /
• pp.40-45
• /
• 2006

원하는 유전자를 배큘로바이러스의 감염에 의하여 초파리 Drosophila melanogaster S2 세포에 도입하는 배큘로바이러스/S2 세포 발현 시스템은 강력하고 안전한 배큘로바이러스의 장점과 세포가 파괴되지 않는 S2 세포의 장점을 접목한 시스템이다. 본 연구에서는 외래 목적 단백질로 발현 모니터링이 손쉬운 녹색형광단백질(green fluorescent protein)을 발현시키는 재조합 배큘로바이러스를 이용하여 S2 세포에의 감염조건들에 대한 영향 연구를 수행하였다. 재조합 배큘로바이러스의 S2 세포에의 감염조건으로는 multiplicity of infection(MOI), 초기 세포 수, 배큘로바이러스 용액이 세포를 적시는 최소 부피, 배큘로바이러스를 첨가한 후 제거하기까지의 배양시간 그리고 배큘로바이러스 제거 후 S2 세포를 혈청이 존재하는 배지에서 키우는 배양시간을 선정하였다. MOI는 일반적으로 크게 하는 것이 높은 발현 수율을 위하여 좋은 결과를 보였으나 세포배양이 길어지는 경우 세포독성의 문제가 심각해 질 수 있고 실제적인 배양에서는 높은 MOI를 유지하는 것이 불가능하므로 사용하는 100 mm 배양접시에서 배큘로바이러스와 S2 세포가 접촉하는 동안의 변수들인 MOI를 적정의 값인 30으로, 배큘로바이러스 배양 시간을 1.5 시간으로 고정함으로써 배큘로바이러스가 숙주 세포인 S2에 대해 미치는 세포독성을 낮출 수 있었다. 또한, 배큘로바이러스 최소 부피는 배양접시에서 사용부피의 2.4％에서 가장 좋은 결과를 보였으며 배큘로바이러스 용액을 10배 농축시킴으로써 이 부피를 맞추기 위해 첨가시키는 새로운 배지의 비율을 높임으로써 결과적으로 배큘로바이러스에 의한 세포독성을 줄일 수 있었다. 이를 통하여 세포 파쇄 및 배양접시 표면에서 탈착되는 것을 막고 높은 생장 상태를 유지해서 감염 효율도 높일 수 있었다. 배큘로바이러스의 감염이 끝난 후의 관여하는 변수들인 감염 후 배양시간은 24시간에서 최대의 녹색형광단백질의 발현을 나타내었다.

• 대한환경공학회지
• /
• 제30권3호
• /
• pp.345-351
• /
• 2008

본 연구에서는 다양한 pH 조건에서 활성탄에 Fe(III)를 첨착시킨 Fe-첨착활성탄(Fe-AC)을 제조하였으며, 제조한 Fe-AC가 여과재질로서의 안정성 유무를 파악하기 위하여 내산성 실험을 수행하였다. 또한 Fe-AC의 중금속 제거능을 파악하기 위하여 회분식 실험을 수행하였다. 흡착제의 안정성 실험결과 모든 pH 조건에서 시간이 지날수록 철의 용출량은 증가하였지만, 용액의 pH가 높아질수록 철의 용출량이 감소하는 경향을 보였다. 용액의 pH를 2로 고정했을 경우 시간경과에 따라 철의 용출량이 점차 증가하여 12시간 후에는 Fe-AC에 함유된 총 철 함량의 13%가 용출되었으나, pH 3 이상에서 철의 용출량은 급격히 줄어들어서 무시할 수 있는 것으로 나타났다. 회분식 실험결과 Fe-AC에 의한 Cu(II) 제거는 흡착질의 농도가 감소하고 용액의 pH가 증가할수록 Cu(II)의 제거율은 증가하는 경향을 보였다. 모델링에 의한 흡착결과 예측은 이중확산층 이론에 의한 inner-sphere type의 표면착물화를 고려하여 MINTEQA2 프로그램을 사용하여 실시하였다.

• 상하수도학회지
• /
• 제29권2호
• /
• pp.261-269
• /
• 2015

In this study, we applied a membrane distillation process to investigate a feasibility of treating a wastewater with high concentration of organic matters including nitrogen and phosphorus. The laboratory scale experiment was performed by using a hydrophobic PVDF membrane with the pore size of $0.22{\mu}m$ and porosity of 75%. The installation was direct contact type where the temperature difference between a feed and permeate side was controlled to have a range from 20 to $60^{\circ}C$. We observed a flux variation and a concentration changes of COD, $PO{_4}^{3-}$-P, $NH_4{^+}$-N and conductivity of feed side as well as permeate side with various temperature differences (20 to $60^{\circ}C$), cross flow velocities (0.09 to 0.27 m/s) through the module, and pH (6.6 to 12.0) of the feed that has the initial concentration of COD about 1,000 mg/L, total nitrogen 390 mg/L, total phosphorus 10 mg/L, conductivity of $7,000{\mu}s/cm$. The results showed that the average flux was ranged from 4 to $40L/m^2/hr$ which was almost similar with the flux of NaCl and deionized water used as a feed solution. The lowest flux was obtained at the operating condition with the temperature difference of $20^{\circ}C$ and cross flow velocity of 0.09 m/s while the highest one was measured with $60^{\circ}C$ and 0.27 m/s. Above 99% of COD and $PO{_4}^{3-}$-P in the feed could be rejected regardless of an operating condition. However, the removal rate of ammonium nitrogen was varied from 64 to 99% depending on the pH of feed solution.