• 한국전자통신학회논문지
• /
• 제6권6호
• /
• pp.973-980
• /
• 2011

본 논문에서는 기존의 문제점인 얼굴 움직임이 있을 시 시선 식별이 어려운 점과 사용자에 따른 교정작업이 필요하다는 점을 해결하고자 새로운 시선 식별 시스템을 제안한다. Kalman필터를 사용하여 현재 머리의 위치정보를 이용하여 미래위치를 추정하였고 얼굴의 진위 여부를 판단하기 위해서 얼굴의 특징요소를 구조적 정보와 비교적 처리시간이 빠른 수평, 수직 히스토그램 분석법을 이용하여 얼굴의 요소를 검출한다. 그리고 적외선 조명기를 구성하여 밝은 동공효과를 얻어 동공을 실시간으로 검출, 추적하였고 동공-글린트 벡터를 추출한다.

• Membrane and Water Treatment
• /
• 제11권1호
• /
• pp.25-29
• /
• 2020

The purpose of this study was to investigate the characteristics of lignin fractionated from waste wood (WW) using a two-step process of ethanol organosolv pretreatment followed by ultrafiltration with membranes of different molecular weight cut-offs (1, 5 and 20 kDa). The different permeates obtained were characterized by fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR), thermogravimetric analysis (TGA) and gel permeation chromatography (GPC). The analysis by FT-IR and NMR of these lignins showed that the lignin core was successfully separated from WW. TGA curves confirmed that the thermal properties of lignin fractionated by ultrafiltration were almost identical to each other. The results from GPC confirmed that fractionating of lignin was achieved by ultrafiltration. For the membrane fractionation process, values of molecular weight decreased as the cut-offs used to obtain the fractions became smaller. As a result, fractionating lignin by a two-step process allowed separating different fractions of lignin of different molecular weights yielded high purity without interference from existing pollutants in WW. The two-step process offers the possibility of using fractionated WW as an untapped source of lignin.

• 대한물리의학회지
• /
• 제14권3호
• /
• pp.21-27
• /
• 2019

PURPOSE: This study examined the changes in the kinematic variables during walking on a downhill ramp according to the shoe heel height. METHODS: The subjects were 10 adult women with no history of musculoskeletal disorders who agreed to participate in the study. Data were collected using a motion analysis system (VICON) consisting of six infrared cameras. The slope was 120 cm in width, 200 cm in length, and 15 in inclination. To confirm the change in gait parameters (stride length, gait speed) and lower extremity joint angle according to the heel heights of the shoes, flat, 5 cm, and 10 cm heel shoes were prepared and walked alternately. RESULTS: As a result, both the stride length and walking speed showed significant differences according to the heel height between flat and 10 cm (p<.05). In the sagittal plane, there was no significant difference in the hip joint and knee joint, but a significant difference was observed in all events in the ankle joint on all heel heights (p<.05). In particular, the heel strike and mid stance events showed significant differences among all height conditions (p<.05). No significant difference was observed in any of the joint angle changes in the frontal plane (p>.05). CONCLUSION: As the shoe heel height increased, the instability increased and efforts to secure the stability were made, leading to a shortened stride length, walking speed, and angle of the ankle joint.

• 반도체디스플레이기술학회지
• /
• 제18권2호
• /
• pp.44-47
• /
• 2019

Amorphous carbon layer (ACL) is actively used as an etch mask. Recent advances in patterning ACL requires the next level of durability of hard mask in high aspect ratio etch in near future semiconductor manufacturing, and it is worthwhile to know the surface property of ACL thin film to enhance the property of etch hard mask. In this research, ACL are deposited by 6 inch plasma enhanced chemical vapor deposition system with $C_3H_6$ and $N_2$ gas mixture. Surface properties of deposited ACL are investigated depending on gas flow, pressure, RF power. Fourier transform infrared is used for the analysis of surface chemistry, and X-ray photoemission spectra is used for the structural analysis with the consideration of the contents of $sp^2$ and $sp^3$ through fitting of C1s. Also mechanical properties of deposited ACL are measured in order to evaluate hardness.

• Journal of the Korean Wood Science and Technology
• /
• 제51권5호
• /
• pp.321-333
• /
• 2023

In this study, lignin, a lignocellulosic biomass, was chemically modified to produce polyethyleneimine-grafted lignin (PKL) with maximum hexavalent chromium [Cr(VI)] adsorption capacity. Changes in the physicochemical properties due to the cationization of lignin were confirmed through elemental analysis, Fourier transform infrared spectroscopy, and moisture stability evaluation. Alginate (Alg) beads containing PKL (Alg/PKL) were prepared by incorporating cationic lignin into the Alg matrix to apply the prepared PKL in a batch-type water treatment process. The optimal Alg/lignin mixing ratio was selected to increase the Cr(VI) adsorption capacity and minimize lignin elution from the aqueous system. The selected Alg/PKL beads exhibited an excellent Cr(VI) removal capacity of 478.98 mg/g. Isothermal adsorption and thermodynamic analysis revealed that the Cr(VI) removal behavior of the Alg/PKL beads was similar to that of heterogeneous chemical adsorption. In addition, the bulk adsorbent material in the form of beads exhibited adsorption behavior in three stages: surface adsorption, diffusion, and equilibrium.

• 한국분무공학회지
• /
• 제27권1호
• /
• pp.11-17
• /
• 2022

In upcoming Post Stage-V and Tier 5 regulations of construction machineries, nitrogen oxide (NOx) emissions are strictly limited in cold start conditions. In response to this, a method of improving NOx conversion efficiency has been applied by installing an electric heating catalyst (EHC) in front of conventional urea-SCR systems so that the evaporation and thermal decomposition of urea-water solution can be promoted in cold start conditions. In this strategy, the evaporation and thermal decomposition of urea-water solution and corresponding NOx conversion efficiency are governed by temperature conditions inside the EHC. Therefore, characterizing the temperature distribution in the EHC under various operating conditions is crucial for the optimized operation and control of the EHC in Urea-SCR systems. In this study, a 1-D modeling analysis was performed to predict the heater surface temperature distribution in EHC under various operating conditions. The reliability of prediction results was verified by comparing them with measurement results obtained using an infrared (IR) camera. Based on 1-D analysis results, the effects of various EHC operation parameters on the heater surface temperature distribution were analyzed and discussed.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1273-1273
• /
• 2001

The efficiency of the luminal fermentation process influences overall efficiency of luminal production, animal health and reproduction. Ruminant production systems have a significant impact on the global environment, as well. Animal wastes contribute to pollution of the environment as ammonia volatilized to the air and nitrate leached to ground water. Microbial protein synthesis in the rumen satisfies a large proportion of the protein requirements of animals. Quantifying the microbial synthesis is possible by using markers for lumen bacteria and protozoa such as nucleic acids, purine bases, some specific amino acids, or by isotopic $^{15}N,^{32}P,\;and\;^{35}S$ labelled feeds. All those methods require cannulated animals, they are time-consuming and some methods are very expensive as well. Many attempts have been made to find an alternative method for indirect measurement of microbial synthesis in intact animals. The present investigations aimed to assess possibilities of NIRS for prediction of purine nitrogen excretion and ruminal microbial nitrogen synthesis by NIR spectra of urine. Urine samples were collected from 12 growing sheep,6 of them male, and 6- female. The sheep were included in feeding experiment. The ration consisted of sorghum silage and protein supplements -70:30 on dry matter basis. The protein supplements were chosen to differ in protein degradability. The urine samples were collected daily in a vessel containing $60m{\ell}$ 10% sulphuric acid to reduce pH below 3 and diluted with tap water to 4 liters. Samples were stored in plastic bottles and frozen at $-20^{\circ}C$ until chemical and NIRS analysis. The urine samples were analyzed for purine derivates - allantoin, uric acid, xantine and hypoxantine content. Microbial nitrogen synthesis in the lumen was calculated according to Chen and Gomes, 1995. Transmittance urine spectra with sample thickness 1mm were obtained by NIR System 6500 spectrophotometer in the spectral range 1100-2500nm. The calibration was performed using ISI software and PLS regression, respectively. The following statistical results of NIRS calibration for prediction of purine derivatives and microbial protein synthesis were obtained.(Table Omitted). The result of estimation of purine nitrogen excretion and microbial protein synthesis by NIR spectra of urine showed accuracy, adequate for rapid evaluation of microbial protein synthesis for a large number of animals and different diets. The results indicate that the advantages of the NIRS technology can be extended into animal physiological studies. The fast and low cost NIRS analyses could be used with no significant loss of accuracy when microbial protein synthesis in the lumen and the microbial protein flow in the duodenum are to be assessed by NIRS.

• 대한원격탐사학회지
• /
• 제24권4호
• /
• pp.309-324
• /
• 2008

Terra/Aqua MODIS의 적외관측 자료를 이용하여 동아시아 지역에서 물리적 방법과 split-window 방법으로 총가강수량을 산출하는 알고리즘을 개발하였다. 물리적 방법에서는 동아시아 지역에 대한 분석 예측 자료를 생산하는 RDAPS 자료를 알고리즘의 초기 추정치로 사용하였다. 이 과정에서 복사전달계산을 위해 빠르고 정확도가 높은 RTTOV-7 모델을 이용하였다. Split-window를 이용한 총가강수량 산출에서는 동아시아 지역의 라디오존데 관측자료를 훈련자료로 사용하여 밝기온도를 계산하였고, 이로부터 관측된 밝기온도로부터 총가강수량을 산출할 수 있는 회귀식을 도출하였다. 위의 두 알고리즘을 2004년 8월과 12월의 MODIS 적외 자료에 적용하여 산출한 결과를 해양에서는 DMSP SSM/I 결과와 육지에서는 라디오존데 관측 결과와 비교하여 검증하였고, 이를 바탕으로 총가강수량의 정확성에 영향을 미치는 요인과 산출과정에 중요한 물리과정을 분석하였다. 비교결과 RDAPS, MODIS, split-window 방법에 비해 물리적 방법을 이용한 총가강수량의 산출 정확성이 높은 것으로 나타났다. 그러나 물리적 방법은 초기 추정치에 따라 산출결과가 상이하게 나타나는 단점을 가지고 있는 것으로 파악되었다. 따라서 TIGR 자료와 같은 기후 평균값을 초기치로 적용함에 있어 주의가 요구된다. 이러한 원인으로 지표 부근의 수증기에 대한 정보 부족 등을 들 수 있다. 이러한 단점에도 불구하고 지표와 지형의 변화가 큰 한반도를 포함한 동아시아 지역에서는 물리적 방법에 의한 총가강수량 산출의 효율성이 큰 것으로 사료된다.

• 한국공간구조학회논문집
• /
• 제10권2호
• /
• pp.135-145
• /
• 2010

본 논문은 사례조사를 통해 국내외 대규모 실내경기장의 소방방재계획상의 특정을 분석함으로서 향후 국내에 건립될 대공간 건축물의 소방방재계획 수립에 활용될 기초자료를 도출코자 하였다. 본 논문에서는 국내의 소방방재설비관련 법규 검토와 국내 3개, 국외 8개의 대규모 실내경기장을 대상으로 화재감지설비 소화설비 배연설비 피난계획 적용현황을 조사하여 대공간의 소방방재시스템의 동향을 파악하고 이들을 비교, 분석하였다. 연구 결과 대규모 실내경기장의 화재감지설비는 공간특성에 적합한 적외선화재감지기, 염감지기 등이 유력한 화재감지설비로 사용되며, 소화설비는 건식살수설비, 방수총소화설비 등이 채택되었으며 배연에서는 축연시스템이 적극 활용됨을 확인하였다.

• 한국전자통신학회논문지
• /
• 제7권6호
• /
• pp.1513-1518
• /
• 2012

본 논문에서는 PC모듈 기반으로 LED(Light Emitting Diode)의 White조명을 이용한 VLC(Visible Light Communication) 송 수신기 모듈의 미디어 전송 시스템을 구현하고 전송 기술에 대해 성능 분석을 하기 위한 연구이다. LED가시광통신을 실현시키고자 송신부에는 1~12개의 LED발광소자와 수신부에는 가변 센서를 사용 하고자 한다. LED가시광통신을 하고자 개발이 이루어진 송 수신부의 초기 거리 값은 0~1m이상으로 하고 전체 시스템 전송 속도는 수천 kbps를 가지는 가시광 미디어 전송 시스템을 이루었다. 성능 분석을 위해서, PC 모듈에 LED 및 적외선센서를 구성하여 예측 및 통신 거리에 분석하여 응용 방법과 가능성에 대해서 확인하고자 한다. LED 모듈의 전체적인 효율 증가를 위하여 렌즈 착용시와 미착용시 각 성능을 측정하여 약 20%의 효율이 증가하였음을 알 수 있었다.