• 한국광학회지
• /
• 제7권3호
• /
• pp.183-190
• /
• 1996

적외선, 가시광선 겸용의 3반사망원경계를 설계하기 위하여 형상설계법 및 3차수차의 보정방법이 연구되었다. 적외선용의 광학계는 3반사경계만으로 구성되었으며 원추곡면화를 통하여 구면수차, 코마, 비점수차를 보정하였다. 가시광선용의 광학계는 적외선용의 3반사경계의 상면앞에 보정렌즈를 추가하여 상면만곡을 보정하였다. 설계된 3반사망원경계는 파장 10.mu.m에서는 시계 2.4.deg. 내에서 회절한계의 결상성능을 가지고 있다. 가싣광선대역의 단파장에 대한 rms spot size는 3.deg. 시계내에서 25.mu.m이하이며, CCD의 사용에 적합하도록 flat field 조건을 만족하고 있다.

• 제어로봇시스템학회논문지
• /
• 제16권2호
• /
• pp.177-187
• /
• 2010

A MTG (Multimode Tracking and Guidance) system is employed to compensate for the limitations of individual seekers such as RF (Radio frequency) or IIR (Imaging Infra-red) and to improve the overall tracking and guidance performance in jamming, clutter, and adverse weather environments. In the MTG system, tracking filter, data association, and data fusion methods are important elements to maximize the effectiveness of precision homing missile guidance. This paper proposes the formulation of a Kalman filter for the estimation of line-of-sight rate from seeker measurements in missiles guided by proportional navigation. Also, we suggest the HPDA (Highest Probability Data Association) and data fusion methods of the MTG system for target tracking in the adverse environments. Mont-Carlo simulation is employed to evaluate the overall tracking performance and guidance accuracy.

• 제어로봇시스템학회논문지
• /
• 제16권10호
• /
• pp.982-990
• /
• 2010

In a target tracking system using image information from a CCD (Charged Couple Device) or an IIR (Imaging Infra-red) sensor, occluded targets can result in track losses. If the target is occlued by background objects such as buildings or trees, probability of track existence will be reduced sharply and track will be terminated due to track maintenance algorithms. This paper proposes data association algorithm based on target existence for the robust tracking performance. we suggest the HPDA (Highest Probability Data Association) algorithm based on target existence and the tracking performance is compared with the established method based on target perceivability. Image tracking simulation that utilizes virtual 3D images and real IR images is employed to evaluate the robustness of the proposed tracking algorithm.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.429-430
• /
• 2009

• 한국정밀공학회지
• /
• 제29권8호
• /
• pp.853-862
• /
• 2012

The present study develops a method for directly measuring the temperature field in the primary deformation zone with a high spatial resolution during 2-D orthogonal machining. This is enabled by the use of a high-speed, charge-coupled device (CCD) based, infra-red (IR) imaging system which allows characteristics of the temperature field such as the location and magnitude of the highest temperature and temperature gradient in the primary deformation zone to be identified. Based on these data, the relation between the machining temperature and the cutting conditions is investigated.

• Applied Science and Convergence Technology
• /
• 제26권6호
• /
• pp.195-200
• /
• 2017

A mobile lab kart for plasma training is developed with a high vacuum pumping system, vacuum gauges and a glass discharge tube powered by a high voltage transformer connected to a household 60 Hz line. A numerical model is developed by using a commercial multiphysics software package, CFD-ACE+ to analyze the experimental data. Simulations for argon and nitrogen were carried out to provide fundamental discharge characteristics. Variations of the kart configuration were demonstrated: a glass tube with three electric probes, optical emission spectrometer attachment and infra red thermal imaging system to give more detailed analysis of the discharge characteristics.

• Korean Journal of Acupuncture
• /
• 제19권2호
• /
• pp.13-33
• /
• 2002

This study was examined for effects of acupuncture of Zusanli (ST36) on the facial thermography in health subjects. The volunteers who participating in this study had taken rest for 20 - 30 mins in room temperature (23-$25^{\circ}C$) before the examination and informed them what to prohibit smoking, drinking and administration of drug for the previous day. The thermography of face was taken using Infra-Red Imaging System (IR 2000, MEDI-CORE Co., Korea) by time interval of 15 minutes at 15 min before, just before and 15 min after, 30 min after and 45 min after acupuncture stimulation. Acupuncture was applied to the left ST36 for 30 mins. The results showed that acupuncture of ST36 significantly decreased the temperature of all the areas of facial surface comparing to those of control group. Also, it was observed that the quantities of thermal changes following acupuncture of ST36 been increased significantly at the A1, A4, A6, A7 and A9 ROIs (region of interest) comparing that of control group. Observed the thermography classified by ROI, it was clear the fact that acupuncture of ST36 could modulate the specific areas concerning to the facial pathway of Stomach Meridian, because the thermal responses following acupuncture of ST36 were specific at the A1, A2, A5 and A9 ROIs, relatively. These results suggest that acupuncture of ST36 may modulate thermal distributions and changes of facial areas concerned with Stomach Meridian.

• Korean Journal of Acupuncture
• /
• 제20권4호
• /
• pp.1-16
• /
• 2003

Objectives : This study was examined for effects of acupuncture of Hyeong points' Acupuncture of Three Foot-eum Collaterals on the abdominal thermography of health subject. Methods : The volunteers who participating in this study had taken rest for 20 - 30 minutes in room temperature $(23-25^{\circ}C)$ before the examination and informed them what to prohibit smoking, drinking and administration of drug for the previous day. The thermography of abdomen including a below part of the chest was taken using Infra-Red Imaging System (IR 2000, MEDI-CORE Co., Korea) by time interval of 15 minutes at 15 minutes before, just before and 15 minutes after, 30 minutes after and 45 minutes after acupuncture stimulation. Acupuncture was applied to the left Hyeong points' Acupuncture of Three Foot-eum Collaterals for 30 minutes. Results : The results showed that acupuncture of Hyeong points had more potencies of changes on all the ROIs of abdominal thermography than those of control group. Also, it was observed that the quantities of thermal changes following acupuncture of Hyeong points been increased comparing that of control group at all the ROIs (region of interest). Observed the thermography classified by ROI, however, it was failed that acupuncture of Hyeong points could modulate the specific areas concerning to the abdominal pathway of Three Foot-eum Collaterals. Conclusions : These results suggest that acupuncture of Hyeong points may modulate thermal distributions and changes of abdominal areas including the below of chest.

• 한국항공우주학회지
• /
• 제46권7호
• /
• pp.557-566
• /
• 2018

본 논문에서는 항공기 자동 공중급유를 위해 영상기반 상대 항법 시스템을 구현한다. 급유기와 피급유기는 프로브-드로그 방식의 공중급유를 가정하며 상대항법은 피급유기가 드로그에 대한 상대정보를 획득하며 진행한다. 드로그로부터 상대정보를 획득하기 위해 드로그 형태를 규정하고 IR카메라를 이용한 영상처리를 진행한다. 영상처리를 통해 얻은 드로그의 정보로부터 Gaussian Least Squares Differential Correction(GLSDC) 및 Levenberg-Marquardt(LM)을 이용한 상대항법을 진행하고 시뮬레이션을 통해 두 알고리즘의 분석을 수행한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.261-263
• /
• 2005

In this paper, we implement an identification system using the vein image of the hand. The vein pattern is obtained in the grey-scale 2D image through the infrared-red imaging from back of the hand. Since the frame has lack of clearance, we use some enhancing methods such as the complement, addition, and multiplication to the image to increase the contrast. After Wiener filtering for smoothness of the vein pattern, we transform the image into the binary image with mean function. The binarized image is session thinned and the cross-points in the vein tree are obtained by calculating the number of pixels connected because the image is shaped as a tree. We choose the point and find the nearest to the center if it has majority, where we find the two end points of the selected line. We can get the angle between the two lines joined at the cross-point and store its coordinates, angle, and label the values. The values are used as the feature vector of the vein pattern. This procedure is similar to the human cognition sequences. It is shown that the proposed method is simple for the vein recognition.