References
- Shaw, M. C., "Metal Cutting Principles," Oxford University Press, 1984.
- Zhen-Bin, H. and Komanduri, R., "On a Thermomechanical Model of Shear Instability in Machining," Annals of the CIRP, Vol. 44, No. 1, pp. 69-73, 1995. https://doi.org/10.1016/S0007-8506(07)62277-X
- Barrow, G., "A Review of Experimental and Theoretical Techniques for Assessing Cutting temperatures," Annals of the CIRP, Vol. 22, pp. 203-211, 1973.
- Davies, M. A., Ueda, T., M'Saoubi, R., Mullany, B., and Cooke, A. L., "On the Measurement of Temperature in Material Removal Processes," Annals of the CIRP, Vol. 56, No. 2, pp. 581-604, 2007. https://doi.org/10.1016/j.cirp.2007.10.009
- Hollander, M. B. and Eglund, J. E., "Thermocouple Technique Investigation of Temperature Distrubution in the Workpiece During Metal Cutting," ASTME Research Report No. 7, 1957.
- Shaw, M. C., Cook, N. H., and Smith, P. A., "Report on the Cooling Characteristics of Cutting Fluid," ASTME Research Report No. 19, 1958.
- Reichenbach, G. S., "Experimental Measurement of Metal Cutting Temperature Distributions," Transactions of the ASME, Vol. 80, pp. 520-540, 1958.
- Boothroyd, G., "Temperatures in Orthogonal Metal Cutting," Proceedings of the Institution of Mechanical Engineers, Vol. 177, No. 1, pp. 789-810, 1963.
- Davies, M. A., Yoon, H., Schmitz, T. L., Burns, T. J., and Kennedy, M. D., "Calibrated Thermal Microscopy of the Tool-Chip Interface in Machining," Machining Science and Technology, Vol. 7, No. 2, pp. 167-190, 2003. https://doi.org/10.1081/MST-120022776
- Davies, M. A., Cao, Q., Cooke, A. L., and Ivester, R., "On the Measurement and Prediction of Temperature Fields in Machining AISI 1045 Steel," Annals of the CIRP, Vol. 52, No. 1, pp. 77-80, 2003. https://doi.org/10.1016/S0007-8506(07)60535-6
- Armendia, M., Garay, A., Villar, A., Davies, M. A., and Arrazola, P. J., "High Bandwidth Temperature Measurement in Interrupted Cutting of Difficult to Machine Materials," Annals of the CIRP, Vol. 59, No. 1, pp. 97-100, 2010. https://doi.org/10.1016/j.cirp.2010.03.059
- Sutter, G., Faure, L., Molinari, A., Ranc, N., and Pina, V., "An Experimental Technique for the Measurement of Temperature Fields for the Orthogonal Cutting in High Speed Machining," International Journal of Machine Tools and Manufacture, Vol. 43, No. 7, pp. 671-678, 2003. https://doi.org/10.1016/S0890-6955(03)00037-3
- Sutter, G. and Ranc, N., "Temperature Fields in a Chip during High-Speed Orthogonal Cutting - An Experimental Investigation," International Journal of Machine Tools and Manufacture, Vol. 47, No. 10, pp. 1507-1517, 2007. https://doi.org/10.1016/j.ijmachtools.2006.11.012
- M'Saoubi, R. and Chandrasekaran, H., "Investigation of the Effects of Tool Micro-Geometry and Coating on Tool Temperature during Orthogonal Turning of Quenched and Tempered Steel," International Journal of Machine Tool and Manufacture, Vol. 44, No. 2-3, pp. 213-224, 2004. https://doi.org/10.1016/j.ijmachtools.2003.10.006
- Davies, M. A., Cooke, A. L., and Larsen, E. R., "High Bandwidth Thermal Microscopy of Machining AISI 1045 Steel," Annals of the CIRP, Vol. 54, No. 1, pp. 63-66, 2005. https://doi.org/10.1016/S0007-8506(07)60050-X
- Arrazola, P. J., Arriola, I., Davies, M. A., Cooke, A. L., and Dutterer, B. S., "The Effect of Machinability on Thermal Fields in Orthogonal Cutting of AISI 4140 Steel," Annals of the CIRP, Vol. 57, No. 1, pp. 65-68, 2008. https://doi.org/10.1016/j.cirp.2008.03.139
- Arrazola, P. J., Arriola, I., and Davies, M. A., "Analysis of the Influence of Tool Type, Coatings, and Machinability on the Thermal Fields in Orthogonal Machining of AISI 4140 Steels," Annals of the CIRP, Vol. 58, No. 1, pp. 85-88, 2009. https://doi.org/10.1016/j.cirp.2009.03.085
- O'Sullivan, D. and Cotterell, M., "Temperature Measurement in Single Point Turning," Journal of Materials Processing Technology, Vol. 118, No. 1-3, pp. 301-308, 2001. https://doi.org/10.1016/S0924-0136(01)00853-6
- Narayanan, V., "Direct measurement of temperature in machining," M.Sc. Thesis, School of Industrial Engineering, Purdue University, 2000.
- Hwang, J. and Chandrasekar, S., "Contact Conditions at the Chip-Tool Interface in Machining," Int. J. Precis. Eng. Manuf., Vol. 12, No. 2, pp. 183-193, 2011. https://doi.org/10.1007/s12541-011-0026-7
- Potdar, Y. K. and Zehnder, A. T., "Measurements and Simulations of Temperature and Deformation Fields in Transient Metal Cutting," Journal of Manufacturing Science and Engineering, Vol. 125, No. 4, pp. 645-655, 2003. https://doi.org/10.1115/1.1596571
- Potdar, Y. K. and Zehnder, A. T., "Temperature and deformation measurements in transient metal cutting," Experimental Mechanics, Vol. 44, No. 1, pp. 1-9, 2004. https://doi.org/10.1007/BF02427969
- Vernaza-Peña, K. M., Mason, J. J., and Li, M., "Experimental study of the temperature field generated during orthogonal machining of an aluminum alloy," Experimental Mechanics, Vol. 42, No. 2, pp. 221-229, 2002. https://doi.org/10.1007/BF02410886
- Mason, J. J., Kazban, R. V., and Vernaza-Peña, K. M., "Effect of Tool Parameters on Temperature Fields in High-Speed Machining," Proc. of 2006 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 2006.