Cho, Byung-Ki;Cho, Jaeho;Lee, Myoungjin;Lee, Jun Young;Bae, Su-Young;The Academic Committee of Korean Foot and Ankle Society,
Journal of Korean Foot and Ankle Society
/
v.26
no.1
/
pp.22-29
/
2022
Purpose: Despite continuous updates of standard treatment guidelines for acute ankle sprain and chronic ankle instability (CAI), in practice preferred treatment protocols vary widely. Based on a Korean Foot and Ankle Society (KFAS) member survey, this study reports current trends in the management of ankle ligament injuries. Materials and Methods: A web-based questionnaire containing 34 questions was sent to all KFAS members in September 2021. Questions mainly addressed clinical experience and preferences for the diagnosis and treatment of ankle ligament injuries. Answers with a prevalence of ≥50% among respondents were considered to reflect tendencies. Results: Eighty-four of the 550 members (15.3%) responded. Answers that showed a tendency were as follows: commonest additional image study (ultrasound), conservative treatment modality (immobilization, oral medication), frequency of surgical treatment (<5 cases per annum), most important factor when deciding on surgical treatment (activity level, e.g., occupation or sport), and commonest surgical procedure (open ligament repair). Answers that showed a tendency for CAI were as follows: most important symptom (repeated sprain, giving way), radiological factors (talar tilt, osteochondral lesion, anterior talar translation), and patient factors (occupation, sports activities, recurrent instability after surgery, etc.). For decision making regarding surgical treatment and method, the most preferred surgical procedure was the modified Broström procedure, and the most common repair technique was suture anchor technique. The following were considered poor prognostic factors; generalized laxity, failed previous surgery, cavovarus, severe mechanical instability, heavy work, obesity, and dissatisfaction after surgery because of residual pain. Conclusion: This study updates information regarding current trends in the management of ankle ligament injuries in Korea, and reveals consensus opinions and variations in approaches to patients with an acute or chronic injury. The divergence of approaches identified indicates the need for further studies to determine standard guidelines and long-term results.
Seo, Kyung-Hwa;Kim, Chang-Suk;Lee, Ju-Yeong;Han, Jung-Hee;Kim, Hyun-Soo;Han, Young-Jin;Jung, Young-Jin
Journal of Convergence for Information Technology
/
v.12
no.3
/
pp.186-192
/
2022
This study investigated 110 contractual industries to identify the effects of curriculum development and educational environment improvement through Ulsan College LINC+ Program on job education and training. As a result of the study, core competency and job competency were 5.73 points each in field practice and educational environment, and job performance was significant with OJT 5.58 points and 5.74 points for educational environment(p<0.05). The relationship between suitability of the curriculum, educational environment, and recruitment performance was significant with 5.73 points for OJT, 5.74 points for field training during the education and training period, and 5.79 points for educational environment, and job reeducation/training expense was significant with 5.73 points for OJT and 5.79 points for educational environment(p<0.05). Also, students who completed the LINC+business curriculum shortened their job period by 1 to 6 months in 86.3% of the respondents, and responded that the education expense for new employees was reduced. Therefore, it was identified that the LINC+ Program of Ulsan College has the effect of shortening the job adaptation period and reducing education expenses for new employees by operating the curriculum reflecting the needs of the industry and improving the same educational environment as the industrial field.
Recently, the importance of elemental technologies constituting smart factories is increasing due to the 4th Industrial Revolution, and simulation is widely used as a tool to learn these technologies. In particular, PID control is an automatic control technique used in various fields, and most of them analyze mathematical models in certain situations or research on application development with built-in controllers. In actual educational environment requires PID simulator training as well as PID control principles. In this paper, we propose a model that enables education and practice of various PID controls through 3D simulation. The proposed model implemented virtual balls and Fan and implemented PID control by configuring a system so that the force can be lifted by the air pressure generated in the Fan. At this time, the height of the ball was expressed in a graph according to each gain value of the PID controller and then compared with the actual system, and through this, satisfactory results sufficiently applicable to the actual class were confirmed. Through the proposed model, it is expected that the rapidly increasing elemental technology of smart factories can be used in various ways in a remote classroom environment.
In relation to differentiated mathematics education, Russia has a longer experience in research and practice than Korea. The mathematics curriculum for 10-11 grades currently in use in Russia is a level-specific curriculum and consists of a basic level and an advanced level. And in Russia mathematics textbooks for 10-11 grades are also textbooks for each level. In this study, we analyzed basic level textbook and advanced level textbook written by the same author group among the textbooks 'Algebra and Introduction of Mathematical Analysis' of the 10th grade in Russia. To analyze the main learning contents and textbook descriptions that were added in advanced level the 'real numbers' and 'complex numbers' sections were studied. The main contents of basic and advanced level textbooks for 'functions', 'trigonometric functions', 'trigonometric equations', 'conversions of trigonometric expressions', and 'derivatives', which are included in both basic and advanced textbooks were compared and analyzed, and the descriptive characteristics of the definitions and theorems presented in the two levels of textbooks were also compared and analyzed. From the results of this study, it is expected that various information on the contents of various level textbooks of mathematics, the differences between textbooks for each level, and strategies for the composition of textbooks for various level can be accumulated.
The purpose of this study is to produce works with motifs from organic forms of nature and to try to drive various forms. As a research method, literature was investigated through rsearch in domestic academic jounals, and four hair sculptures that can be used easily in practice were produced by combining the organic forms and design concepts of nature. As a result of the study, first, the work was produced by applying the law of harmony and balance with the motif of the crescent moon. Second, the flow of wave waves was expressed by applying the law of repetition with the motif of waves. Third, the haze rising from the waterfall was expressed by applying the law of dissonance. Fourth, l tried to give the image of the sun announcing a new beginning by emphasizing the rising sun. As a result, it can be seen that the organic form of nature gives an embarrassing inspiration to create design. The limitation of this study is that the accuracy of producing works only with mannequins and producing the same image in the actual model should be limited, and as a follow-up study, research that can be used in the actual model should be continuously conducted.
Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
/
v.7
no.5
/
pp.83-92
/
2017
Because the exhibition space in the virtual reality is another kind of reality, which exits in another level, it enables us free from time and physical space, so using the virtual reality will be an effective practice for overcoming cultural divide and managing museums. Especially, virtual reality could transform a fixed physical space into portable contents, so this characteristic would be useful and meaningful when applying the outreach program, which claimed to stand for 'museum out of museum' as following. First, it will give more opportunities of experiencing museums to many people because of freedom of physical space, one of the advantages virtual reality has. Second, people will experience and understand the contents under the context, rather than simply exposing information of artifacts one by one. Third, even people who are far from a museum can experience identical contents at the same time, so this synchronicity will enhance communications among people and the society. Fourth, it will provide rich contents to people by putting a variety of exhibitions into one VR device. Fifth, it will be useful for archiving the exhibition with minimizing the loss of contents. Sixth, VR will convert museum visitors from observers to operators. Finally, VR can expand the target audience of the outreach program and develop a variety of education programs. Because museums is a public organization for overcoming cultural divide and enhancing communication, they should adopt virtual reality, which enables to extend the exhibition space and provide more opportunities of experiencing museums.
Journal of agricultural medicine and community health
/
v.48
no.2
/
pp.118-131
/
2023
Objectives: This study aimed to provide essential data for the development of a prenatal healthcare intervention program tailored to Vietnamese migrant women. This study assessed the knowledge and the practice of prenatal health management, and the levels of depression among Vietnamese women of childbearing age residing in Korea and Vietnam. Methods: Using a descriptive research design, a structured questionnaire was administered to Vietnamese women of childbearing age, with 113 participants residing in Korea and 196 participants residing in Vietnam. Data was collected from Februay to April 2021. Data was analyzed using t-test and chi-square test. Result: The analysis of knowledge regarding prenatal health management revealed significant differences between married women in both locations, with higher knowledge scores. Regarding prenatal health management practices, no significant differences were found based on marital status or place of residence. Particularly in the item "Will receive regular prenatal check-ups at the hospital." married Vietnamese women in Vietnam had lower scores than unmarried women, and rural women had lower scores than urban women. The lowest score was observed among Korean-residing women in the item "Will seek pregnancy and childbirth information." Regarding depression, married women in Vietnam and women living in rural areas demonstrated significantly higher depression scores. Conclusion: When designing perinatal management interventions for Vietnamese immigrant women, special attention should be given to those originating from rural areas in Vietnam. It is recommended to incorporate the importance of perinatal healthcare and factors related to mental well-being into the intervention program.
KSCE Journal of Civil and Environmental Engineering Research
/
v.28
no.5C
/
pp.293-301
/
2008
Soil profiling is one of the most important work among geotehnical engineering practice. Generally, soil profile is estimated from the observation of soil samples during subsurface exploration but such estimation also includes some experiencing aspects such as flushed water from the borehole, slime colour, boring speed and so on. In addition, since the capacity of hydraulic drill rig is significantly increased, thin layers might be easily missed. So, continuous soil profile is almost impossible over all depth to be bored from conventional subsurface exploration. While CPT or CPTu can serve continuous soil profile information over all depth generally in 5cm interval. Many charts or methods for soil profile from CPT result have been proposed during last several decades over the world. However they have not been verified in local ground condition in Korea. In this research, CPT results and soil classification results based on USCS were compiled from 17 sites over the Korea. Soil classification results by using 7 CPT soil classification charts were compared with those of USCS for the compiled database. Most proper CPT soil classification chart for Korean soil characteristics was evaluated and effective parameters for the soil classification from CPT were discussed. Finally interrelationship between CPT soil classification chart and USCS soil classification was evaluated.
This study explored the effect of corporate field teacher and corporate education satisfaction on apprenticeship education satisfaction and student job competency development focusing on NCS job standards and industry-academia-integrated apprenticeship school project group. As a result of the study, satisfaction with corporate field teachers in the electrical, electronic, and food service sectors was found to have a positive influence on improving students' job competency, while satisfaction with corporate education was important in the management, accounting, office, and information and communication sectors. In the analysis by type of project group, the satisfaction of corporate field teachers in the joint practice type and industry-led type had a strong influence on improving job competency, but in the base school type and single school type, corporate education satisfaction had a greater influence on capacity improvement. Therefore, it is necessary to redefine the competencies of corporate field teachers and to establish and implement an industry-academic integrated apprenticeship school operation plan with the relationship between the type of project group and NCS job standard classification.
KSCE Journal of Civil and Environmental Engineering Research
/
v.26
no.3A
/
pp.513-521
/
2006
Many studies have been conducted on the high tension bolt friction connection in the view of the field practice. Those effort, however, unfortunately have not been appropriately applied in the design specifications. Recently, particularly for steel bridges, rationalization of design takes greater attention from designers and hence, demand on rationalization of high tension connection becomes more significant. The purpose of this study is to suggest direction for the rationalization of high tension bolt connection and to also provide fundamental information for the improvement of the design specifications. In order to accomplish the purposes, the design specifications in Korea was analyzed and compared with other specification from abroad, and was studied one of the most important factors including slip coefficient, and the specifications on the size of bolt holes. The effect of over-sized bolt hole and the reduction of axial force on bolt was evaluated through the experimental studies on the slippage of the high tension bolt connections. Other research topics included herein includes the difference of slip coefficients, the effect of over-sized bolt holes and the gap distance of members, and the application of filler plate and corrosion protected bolts. From the research results, it is known that the specifications in Korea apply a constant slip coefficient with respect to the contacted surface conditions while various coefficients are available depending on the contacted surface conditions. Therefore, it is recommended that the specifications in Korea also develop and detail the slip coefficient which can appropriately take account of the variation of the contacted surface conditions. It is also suggested that the limitation abroad on the over-sized bolt hole may be applied for enhancing the effectiveness of construction.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.