• 제목/요약/키워드: Information Error

검색결과 11,131건 처리시간 0.048초

축감지기가 없는 PSC I 거더교의 주행중 차량하중분석시스템 개발 (Development of PSC I Girder Bridge Weigh-in-Motion System without Axle Detector)

  • 박민석;조병완;이정휘;김성곤
    • 대한토목학회논문집
    • /
    • 제28권5A호
    • /
    • pp.673-683
    • /
    • 2008
  • 본 연구는 PSC I 거더교량을 대상으로 포장층에 축감지기가 없이 오로지 교량 상부구조 하면에서 측정한 변형률 신호만을 이용하는 차량하중분석시스템 개발에 관한 것이다. 중 차량이 교량을 주행할 때 교량 바닥판에서 측정한 변형률 신호로 차량주행정보를 추출하고, 교량 거더 및 가로보에서 측정한 변형률 신호로 차량하중정보를 추출하는 방법이다. 이러한 정보 분석을 위하여 영향선 분석방법과 인공신경망 분석방법을 사용하였다. 학습 데이터 확보 및 시스템 검증을 위하여 임의차량 및 시험차량 주행시험을 실시하였다. 대상 교량에서 하중분석결과, 가로보 변형률 신호를 이용한 경우가 거더 변형률 신호를 이용한 경우보다 더 정확한 결과를 나타내었고, 차선당 2열로 설치된 교량 바닥판 슬래브의 변형률 신호를 이용한 피크 검출 알고리즘도 차량의 속도와 축 수, 주행 차선, 축간 거리, 차간 거리 등의 주행정보를 추출하는데 매우 효과적임을 확인하였다. 또한, 가로보의 변형률 신호를 가지고 인공신경망 학습을 하여 시스템을 구성할 수 있는 경우가 기존의 거더 변형률 신호와 영향선만으로 시스템을 구성하는 경우보다 더 정확한 결과를 얻을 수 있음도 확인 하였다.

통계적 상세화 모형을 활용한 한반도 1km 농업용 전자기후도 제작 (Production of Digital Climate Maps with 1km resolution over Korean Peninsula using Statistical Downscaling Model)

  • 허지나;조재필;심교문;조세라;김용석;강민구;오찬성;서승범;김응섭
    • 한국농림기상학회지
    • /
    • 제25권4호
    • /
    • pp.404-414
    • /
    • 2023
  • 본 연구에서는 미래 SSP 기후변화 시나리오 자료를 생산하기 위해 과거 30년(1981-2010)에 대한 한반도 농업용 전자기후도를 생산하고 평가하였다. ERA5 재분석 자료와 기상청 ASOS 자료에 지형인자를 고려하는 IGISRM 통계 모형을 이용하여 기후요소 6종(강수량, 평균기온, 최고기온, 최저기온 풍속, 상대습도, 일사량)에 대한 1km 해상도의 격자형 상세자료를 생산하였다. 연 평균(누적) 분포도를 살펴본 결과, 모든 변수는 기상청 ASOS 관측에서 나타난 일반적인 특성을 잘 모의하면서 지형적 효과가 적절하게 반영되었다. 농진청 농업기상 AWS와 기상청 방재기상 AWS를 이용하여 상관계수, Slope, NRMSE를 계산한 결과, 기온관련 변수에서는 재현성이 우수하게 나타났으며, 그 외 변수에서는 재현성이 다소 낮고 지역적 편차가 큰 것으로 나타났다. 관측정보 기반의 농업용 전자기후도는 미래 SSP 기후변화 시나리오 자료를 상세화하는데 기본 자료로 활용될 것이다.

스마트 관광 활성화를 위한 트립어드바이저 애플리케이션 리뷰 분석 : 토픽 모델링을 중심으로 (Analyzing TripAdvisor application reviews to enable smart tourism : focusing on topic modeling)

  • 이유나;한무명초;유선영;소미기;노미진
    • 스마트미디어저널
    • /
    • 제12권8호
    • /
    • pp.9-17
    • /
    • 2023
  • 정보통신의 발달과 스마트 기기의 발전 및 보급 향상은 관광 형태의 변화를 야기하였고, 이후 스마트 관광이라는 개념이 등장하였다. 이에 스마트 관광 정책 및 설문에 관한 연구가 진행되고 있으나 애플리케이션 리뷰에 관한 연구는 미비한 편이다. 본 연구는 구글 플레이 스토어 내 스마트 관광 분야의 대표적인 애플리케이션인 트립어드바이저 애플리케이션 리뷰 데이터를 수집하여 LDA(Latent Dirichlet Allocation) 토픽 모델링을 통해 사용 용도와 사용자 만족을 파악하고자 한다. 분석 결과 4개의 토픽이 도출되었으며 2개의 토픽에서는 긍정적인 평가를 나머지 2개의 토픽에서는 부정적인 평가를 하고 있었다. 사용자들은 해당 애플리케이션의 숙박 및 관광 명소 추천 시스템에 만족하고 있음을 알 수 있었으며 검색 시 설정한 필터가 적용되지 않거나 업데이트 후 리뷰가 게시되지 않음에 불편을 겪고 있음을 알 수 있었다. 이에 다양한 추천 카테고리를 애플리케이션에 추가하여 사용자에게 다양한 경험을 제공하는 것이 만족도 향상에 도움이 될 것으로 기대된다. 또한 필터 기능을 포함한 애플리케이션 문제를 파악하여 애플리케이션 환경 점검과 해당 기능 오류 개선을 한다면 사용자 만족도를 향상시킬 수 있을 것으로 기대된다.

Development of Near Infrared Spectroscopy(NIRS) Equation of Crude Protein in Wheat Germplasm

  • Hyemyeong Yoon;Myung-Chul Lee;Yumi Choi;Myong-Jae Shin;Sejong Oh
    • 한국자원식물학회:학술대회논문집
    • /
    • 한국자원식물학회 2020년도 춘계학술대회
    • /
    • pp.100-100
    • /
    • 2020
  • Wheat is mainly composed of carbohydrate but it contains a moderate amount of protein, which gives a very useful characteristics to flour food such as the unique elasticity and stickiness of the dough. We developed a calibration equation for analyzing crude protein content using Near Infrared Spectroscopy to quick analyze the crude protein content of wheat germplasm stored in the National Agrobiodiversity Center, RDA, Korea. The 1,798 wheat germplasms were used to draw up the calibration formula. The crude protein's interval distribution of 1,798 wheat germplasms used for the calibration was 7.04-20.84%, the average content was 13.2%, and standard deviation was 2.6%. The germplasms distribution was composed of a suitable group for the preparation of the calibration formula because the content distribution was a normal, excluding the 13.0-15.5% content section. In order to verify the applicability of the NIRS prediction model, we measured the crude protein content of the 300 wheat germplasms that were not used for the calibration using both Kjeldahl analysis and NIR spectrum. The analysis value calculated using each method were statistically processed, and the test results and statistical indicators of the predictive model were compared. As a result, The R2 value of the optimized NIRS prediction model was 0.997, and the Standard error of Calibration value(SEC) was 0.132, and slope value was 1.000. With prediction model selection, compared to Kjeldahl method, R2 values were 0.994(Kjeldahl), 0.998(NIRS), and the SEC value were 0.191 and 0.132, respectively, comparing the statistical indices of the forecast model. And slope value were 1.013, 1.000, respectively. The analysis of crude protein content by the NIRS predictive model developed by each statistical index showing similar figures is judged to show a high degree of correlation with the Kjeldahl analysis. The proven calibration equation will be used to measure the crude protein content of wheat germplasms held by the National Agrobiodiversity Center, and by dividing the wheat germplasms by their use according to the crude protein content, it will provide useful information to relevant researchers.

  • PDF

강우-유출모형을 활용한 소규모 산지 유역의 유출특성 분석_충북 단양1교 (Analysis of the Runoff Characteristics of Small Mountain Basins Using Rainfall-Runoff Model_Danyang1gyo in Chungbuk)

  • 장형준;이호진;박기순;김성구
    • 한국지반환경공학회 논문집
    • /
    • 제24권12호
    • /
    • pp.31-38
    • /
    • 2023
  • 본 연구에서는 국내 소규모 산지유역을 대상으로 홍수 위험지역에 대한 예·경보 시스템을 구축하기 위한 기초연구로 유출 특성 분석을 수행하였다. 연구 유역은 충청북도 단양군에 위치한 단양1교 유역을 선정하였으며, 연구유역의 수치표고 모형(DEM)을 바탕으로 Q-GIS를 활용하여 유역특성인자를 산정하였다. 또한, 국가수자원관리종합정보시스템에서 제공하는 수문기상자료를 활용 하여 2020년부터 2023년 기간 동안 9개의 호우사상을 선정하였다. 소규모 산지유역의 유출특성을 분석하기 위하여 HEC-HMS 강우-유출모형을 활용하였으며, 9개의 호우사상과 산정된 유역특성인자를 반영하여 강우-유출 모형 모의를 수행하였다. 강우-유출 모형을 바탕으로 모의된 사상 중 오차율이 크게 발생한 6개의 호우사상을 대상으로 하여 매개변수 최적화를 수행 후, 소규모 산지 유역인 단양1교 유역에 적합한 매개변수 범위를 0.8~3.4로 산정하였다. 본 연구의 결과는 소규모 산지유역에 대한 홍수 예·경보 시스템 구축의 기초자료로 활용될 것이며, 추가적인 연구를 통하여 유역특성에 따른 매개변수 범위를 도출하고자 한다.

A 2×2 MIMO Spatial Multiplexing 5G Signal Reception in a 500 km/h High-Speed Vehicle using an Augmented Channel Matrix Generated by a Delay and Doppler Profiler

  • Suguru Kuniyoshi;Rie Saotome;Shiho Oshiro;Tomohisa Wada
    • International Journal of Computer Science & Network Security
    • /
    • 제23권10호
    • /
    • pp.1-10
    • /
    • 2023
  • This paper proposes a method to extend Inter-Carrier Interference (ICI) canceling Orthogonal Frequency Division Multiplexing (OFDM) receivers for 5G mobile systems to spatial multiplexing 2×2 MIMO (Multiple Input Multiple Output) systems to support high-speed ground transportation services by linear motor cars traveling at 500 km/h. In Japan, linear-motor high-speed ground transportation service is scheduled to begin in 2027. To expand the coverage area of base stations, 5G mobile systems in high-speed moving trains will have multiple base station antennas transmitting the same downlink (DL) signal, forming an expanded cell size along the train rails. 5G terminals in a fast-moving train can cause the forward and backward antenna signals to be Doppler-shifted in opposite directions, so the receiver in the train may have trouble estimating the exact channel transfer function (CTF) for demodulation. A receiver in such high-speed train sees the transmission channel which is composed of multiple Doppler-shifted propagation paths. Then, a loss of sub-carrier orthogonality due to Doppler-spread channels causes ICI. The ICI Canceller is realized by the following three steps. First, using the Demodulation Reference Symbol (DMRS) pilot signals, it analyzes three parameters such as attenuation, relative delay, and Doppler-shift of each multi-path component. Secondly, based on the sets of three parameters, Channel Transfer Function (CTF) of sender sub-carrier number n to receiver sub-carrier number l is generated. In case of n≠l, the CTF corresponds to ICI factor. Thirdly, since ICI factor is obtained, by applying ICI reverse operation by Multi-Tap Equalizer, ICI canceling can be realized. ICI canceling performance has been simulated assuming severe channel condition such as 500 km/h, 8 path reverse Doppler Shift for QPSK, 16QAM, 64QAM and 256QAM modulations. In particular, 2×2MIMO QPSK and 16QAM modulation schemes, BER (Bit Error Rate) improvement was observed when the number of taps in the multi-tap equalizer was set to 31 or more taps, at a moving speed of 500 km/h and in an 8-pass reverse doppler shift environment.

주제기반 설계 모형에 따른 수학-정보 연계·융합 수업 자료 개발 연구 (A Study on the Development of Mathematical-Informatics Linkage·Convergence Class Materials according to the Theme-Based Design Model )

  • 이동근;김한수
    • 한국수학교육학회지시리즈E:수학교육논문집
    • /
    • 제37권3호
    • /
    • pp.517-544
    • /
    • 2023
  • 본 연구는 교과 간 연계·융합 수업자료 개발의 필요성이 높아지고 있음에도 고등학교에서 관련 수업 자료 개발 빈도가 적다는 선행연구의 연구 결과에 근거하여 수학과 정보 과목의 연계·융합 수업자료 개발 과정 및 결과물을 제시한 연구이다. 특히 본 연구는 동일한 교원학습공동체 프로그램에 참여한 6명의 교사들이 수학과 정보 교과 간 연계·융합 수업자료로서의 적합성과 현장 수업 적용 가능성이 높은 자료 개발을 목표로 논의한 과정들에 대한 정보를 담고 있다. 자료 개발 절차에 따라 주제기반 설계 모형을 적용하여 자료를 개발하였으며, 선행연구와 교원학습공동체 구성원의 합의 결과를 반영하여 100분 블록 수업 시간 동안 수학과 정보 과목의 교사가 함께 수업을 진행할 수 있는 수업 자료를 개발하였다. 개발한 자료는 사회적으로 이슈가 되었던 문제상황을 두 과목의 연결고리로 삼아 학생들이 수학적 모델링과 코딩을 통한 문제해결을 경험할 수 있는 자료이다. 개발된 자료는 '개발 자료를 현장에 적용하기에 타당한 자료인지 살펴보고 적용 실천성을 높이기 위하여' 현장 교사를 대상으로 CVR 검증을 통하여 검증을 하였으며, 그 결과를 반영하여 최종 개발된 수업 자료를 지도안 형태로 제시하였다. 또한 자료 개발 과정에서 개발자들의 경험한 시행착오와 고민도 함께 기술하여 현장 연구자들의 관련 연구 수행에 기초가 될 수 있는 정보를 제공하고자 하였다. 이러한 연구 결과는 수업자료 개발 모형이 실제 수업에 적용가능한지 탐색할 수 있는 실증적인 자료로서의 가치를 가지며, 이들 자료의 축적은 이론적인 수업 모형과 실제적인 현장 수업 사이의 선순환적인 관계 구축에 도움이 될 것으로 보인다.

A Three-Dimensional Deep Convolutional Neural Network for Automatic Segmentation and Diameter Measurement of Type B Aortic Dissection

  • Yitong Yu;Yang Gao;Jianyong Wei;Fangzhou Liao;Qianjiang Xiao;Jie Zhang;Weihua Yin;Bin Lu
    • Korean Journal of Radiology
    • /
    • 제22권2호
    • /
    • pp.168-178
    • /
    • 2021
  • Objective: To provide an automatic method for segmentation and diameter measurement of type B aortic dissection (TBAD). Materials and Methods: Aortic computed tomography angiographic images from 139 patients with TBAD were consecutively collected. We implemented a deep learning method based on a three-dimensional (3D) deep convolutional neural (CNN) network, which realizes automatic segmentation and measurement of the entire aorta (EA), true lumen (TL), and false lumen (FL). The accuracy, stability, and measurement time were compared between deep learning and manual methods. The intra- and inter-observer reproducibility of the manual method was also evaluated. Results: The mean dice coefficient scores were 0.958, 0.961, and 0.932 for EA, TL, and FL, respectively. There was a linear relationship between the reference standard and measurement by the manual and deep learning method (r = 0.964 and 0.991, respectively). The average measurement error of the deep learning method was less than that of the manual method (EA, 1.64% vs. 4.13%; TL, 2.46% vs. 11.67%; FL, 2.50% vs. 8.02%). Bland-Altman plots revealed that the deviations of the diameters between the deep learning method and the reference standard were -0.042 mm (-3.412 to 3.330 mm), -0.376 mm (-3.328 to 2.577 mm), and 0.026 mm (-3.040 to 3.092 mm) for EA, TL, and FL, respectively. For the manual method, the corresponding deviations were -0.166 mm (-1.419 to 1.086 mm), -0.050 mm (-0.970 to 1.070 mm), and -0.085 mm (-1.010 to 0.084 mm). Intra- and inter-observer differences were found in measurements with the manual method, but not with the deep learning method. The measurement time with the deep learning method was markedly shorter than with the manual method (21.7 ± 1.1 vs. 82.5 ± 16.1 minutes, p < 0.001). Conclusion: The performance of efficient segmentation and diameter measurement of TBADs based on the 3D deep CNN was both accurate and stable. This method is promising for evaluating aortic morphology automatically and alleviating the workload of radiologists in the near future.

Landsat TM 영상과 현장조사를 이용한 잣나무림 재적 추정 (Stand Volume Estimation of Pinus Koraiensis Using Landsat TM and Forest Inventory)

  • 박진우;이정수
    • 한국지리정보학회지
    • /
    • 제17권1호
    • /
    • pp.80-90
    • /
    • 2014
  • 본 연구는 강원대학교 학술림을 대상으로 조사한 42개 표본점의 재적정보와 Landsat TM 영상으로 추출한 Remote Sensing(RS)정보를 이용하여 잣나무임분의 재적을 추정하는 것을 목표로 한다. 실험 대상 학술림 잣나무림의 ha당 평균재적은 $307.7m^3/ha$, 표준편차는 $168.4m^3/ha$이며 산출된 잣나무림 재적을 등급화하였다. TM 영상에 3 by 3 majority filtering을 수행하기 전과 후에 각각 11개의 지수를 추출하였으며, 지수별 평균 화소 값을 이용하여 선형 회귀식 도출에 필요한 독립변수를 선정하였다. 11개의 지수는 6개의 DN(밴드값, 열감지밴드인 Band6을 제외), NDVI(정규식생지수), Band Ratio(BR1:Band4/Band3, BR2:Band5/Band4, BR3:Band7/Band4), Tasseled Cap-Greeness(TC G) 1개로 구성하였다. 그 결과, 필터링 전과 후 모두 NDVI와 TC G가 회귀식에 가장 적합한 지수로 선정되었으며, $R^2$는 필터링 전과 후가 각각 0.736, 0.753로 모두 높았다. 또한, 정확도 비교를 위하여 오차검증을 실시한 결과, RMSE는 필터링 전과 후가 각각 약 $69.1m^3/ha$, 약 $67.5m^3/ha$으로 필터링 후가 낮았으며, bias는 각각 약 $-12.8m^3/ha$, 약 $9.7m^3/ha$으로 필터링 후의 편차가 적어 필터링을 실시한 회귀식이 적합한 모형으로 선정되었다. 필터링 후의 회귀식을 적용하여 추정한 임반별 재적은 총 재적이 약 $160,947m^3$이며, 평균 재적은 약 $315m^3/ha$로 실제 잣나무림의 재적보다 약 1.2배 높게 추정되었다.

GOES-9과 MTSAT-1R 위성 간의 일사량 산출의 연속성과 일관성 확보를 위한 구름 감쇠 계수의 조정 (An Adjustment of Cloud Factors for Continuity and Consistency of Insolation Estimations between GOES-9 and MTSAT-1R)

  • 김인환;한경수;염종민
    • 대한원격탐사학회지
    • /
    • 제28권1호
    • /
    • pp.69-77
    • /
    • 2012
  • 표면도달일사량은 전 지구시스템에 대한 기후 연구에 가장 중요한 요소 중 하나다. 기후 연구에서는 동일 지역을 관측하는 두 개 혹은 그 이상의 위성자료로부터 넓은 공간적 범위를 가지는 장기간의 데이터를 사용하는 것이 필요하다. 시간적 연속성을 가지는 서로 다른 위성으로부터 산출 된 표면도달일사량의 연속성과 일관성을 향상시키는 것은 매우 중요하다. 본 연구에서는 물리적 모델을 이용하여 GOES-9과 MTSAT-1R 위성의 중복 관측 기간 동안의 표면도달일사량을 산출하고, 두 위성의 채널자료와 실측치 비교를 통해 위성간의 연속성과 일관성을 향상시키는 방법을 연구하였다. 두 위성의 적외 채널 온도는 매우 잘 일치하는 경향을 보였다 : RMSE=5.595 Kelvin; Bias=2.065 Kelvin. 반면에, 가시채널은 다른 값의 분포를 보였지만 비슷한 경향을 보였다. 그리고 두 위성으로부터 산출 된 표면도달일사량은 실측치와 일치성이 낮았다. 표면도달일사량의 품질 향상을 위해 구름감쇠계수 조정을 통해 표면도달일사량 산출물을 재생산하였다. 그리고 채널 자료의 비교 분석을 통해 GOES-9 위성을 위한 구름감쇠계수를 생산하였다. 그 결과, 구름 효과를 고려한 GOES-9의 표면도달일사량 산출물은 MTSAT-1R과 실측치에 대해 매우 높은 일치성을 보였다 : RMSE=$83.439W\;m^{-2}$; Bias=$27.296W\;m^{-2}$. 구름감쇠계수 조정을 통해 향상 된 정확도는 두 개 이상의 위성으로부터 산출 된 표면도달일사량 산출물의 연속성과 일관성을 향상 시킬 수 있을 것이다.