• The Journal of Advanced Prosthodontics
• /
• v.3 no.4
• /
• pp.236-239
• /
• 2011

Maxillary labial and buccal frena are considered as normal anatomic structures in the oral cavity. However, they may exist intraorally as a thick broad fibrous attachment and/or become located near the crest of the residual ridge, thus interfering with proper denture border extension resulting in inferior denture stability, retention and overall patient satisfaction. This case report highlights the importance of clinical examination and treatment planning which may mandate preprosthetic surgery prior to fabrication of a new conventional complete denture. Adequate patient satisfaction with conventional complete dentures can be significantly increased after frenectomy.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.7 no.1
• /
• pp.39-42
• /
• 1977

Authors have obserbed a rare case of unilateral hypertrophy occured in the left mandibular condyle of 25 years old man. In the serial roentenograms, Authors have drawn following conclusions. 1. The patients face is markedly asymmetrical. This asymmetry consisted of an elongation and widening of the left mandibular ramus, neck and head of condyle which pushed the chin to the other side. 2. Left mandibular angle is flattened and mandibular inferior border is lower than right. 3. In the relationship of the left posterior teeth, severe mesioocclusion is occured.

• Imaging Science in Dentistry
• /
• v.42 no.4
• /
• pp.261-263
• /
• 2012

Developmental salivary gland defect is a bone depression on the lingual surface of the mandible containing salivary gland or fatty soft tissue. The most common location is within the submandibular gland fossa and often close to the inferior border of the mandible. This defect is asymptomatic and generally discovered only incidentally during radiographic examination of the area. This defect also appears as a well-defined, corticated, unilocular radiolucency below the mandibular canal. Although it is not uncommon for this defect to appear as a round or ovoid radiolucency, multilocular radiolucency of these defects is relatively rare. This report presents a case of a developmental salivary gland defect with multilocular radiolucency in a male patient.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.3
• /
• pp.207-217
• /
• 2010

The purpose of this study was to evaluate the effects of the stress distribution and displacement in mandible according to treatment modalities of mandibular angle fractures, using a three dimensional finite element analysis. A mechanical model of an edentulous mandible was generated from 3D scan. A 100-N axial load and four masticatory muscular supporting system were applied to this model. According to the number, location and materials of titanium and biodegradable polymer plates, the experimental groups were divided into five types. Type I had a single titanium plate in the superior border of mandibular angle, type II had two titanium plates in the superior tension border and in the inferior compression border of mandibular angle, type III had a single titanium plate in the ventral area of mandibular angle, type IV had a single biodegradable polymer plate in the superior border of mandibular angle, type V had a single biodegradable polymer plate in the ventral area of mandibular angle. The results obtained from this study were follows: 1. Stress was concentrated on the condylar neck of the fractured side except Type III. 2. The values of von-Mises stress of the screws were the highest in the just-posterior screw of the fracture line, and in the just-anterior screw of Type III. 3. The displacement of mandible in Type III was 0.04 mm, and in Type I, II, IV, and V were 0.10 mm. 4. The plates were the most stable in the ventral area of mandibular angle (Type III, V). In conclusion, the ventral area of mandibular angle is the most stable location in the fixation of mandibular angle fractures, and the just- posterior and/or the just-anterior screws of the fracture line must be longer than the other, and surgeons have to fix accurately these screws, and the biodegradable polymer plate also was suitable for the treatment of mandible angle fracture.

• The Journal of Korean Academy of Prosthodontics
• /
• v.28 no.1
• /
• pp.63-94
• /
• 1990

The purpose of this study was to analyze the displacement and the magnitude and the mode of distribution of the stresses in the lower overdenture, the mucous membrane, the abutment tooth and the mandibular supporting bone when various denture base materials, such as acrylic resin and 0.5mm metal base, and various denture base designs were subjected to different loading schemes. For this study, the two-dimensional finite element method was used. Mandibular arch models, with only canine remaining, were fabricated. In the first denture base design, a space, approximately 1mm thick, was prepared between the denture and the dome abutment. In the second denture base design, contact between the denture and the dome abutment was eliminated except the contact of the occlusal third of the abutment. In order to represent the same physiological condition as the fixed areas of the mandible under loading schemes, the eight nodes which lie at the mandibular angle region, the coronoid process and the mandibular condyle were assumed to be fixed. Each model was loaded with a magnitude of 10 kgs on the first molar region(P1) and 7 kgs on the central incisal region (P2) in a vertical direction. Then the force of 10 kgs was applied distributively from the first premolar to the second molar of each model in a vertical direction(P3). The results were as follows. : 1. When the testing vertical loads were given to the selected points of the overdenture, the overdenture showed the rotatory phenomenon, as well as sinking and the displacements of alveolar ridge, abutment and lower border of mandible under the metal base overdenture were less than those under the acrylic resin overdenture. 2. The maximum principal stresses(the maximum tensile stresses) being considered, high tensile stresses occured at the buccal shelf area, the posterior region of the ridge crest and the anterior border region of the mandibular ramus. 3. The minimum principal stresses(the maximum compressive stresses) being considered, high compressive stresses occured at the inferior and posterior border region of the mandible, the mandibular angle and the posterior border region of the mandibular ramus. 4. The vertical load on the central incisal region(P2) produced higher equivalent stress in the mandible than that on any other region(P1, P3) because of the long lever arm distance from the fixed points to the loading point. 5. Higher equivalent stresses were distributed throughout the metal base overdenture than the resin base overdenture under the same loading condition. 6. The case of occlusal third contact of the abutment to the denture produced higher equivalent stresses in the abutment, the mandibular area around the abutment and the overdenture than the case of a 1mm space between the denture and the abutment. 7. Without regard to overdenture base materials and designs, the amounts and distribution patterns of equivalent stresses under the same loading condition were similar in the mucous membrane.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.1
• /
• pp.9-15
• /
• 2013

PURPOSE. The purpose of this study was to determine accurately the part of the tragus to be used to form the Ala-Tragal line or Camper's line in orthognathic profile patients. MATERIALS AND METHODS. 150 dentate subjects with age of 18-40 years with orthognathic profile were sampled. Life-size lateral digital photographs of the face with fox plane were taken in natural head position. Different angles between Eye-Ear plane and occlusal plane ($OT_1$-OP), Eye-Ear plane and ala-superior border of tragus ($OT_1-AT_1$), Eye-Ear plane and ala-middle border of tragus ($OT_1-AT_2$) and Eye-Ear plane and ala-inferior border of tragus ($OT_1-AT_3$) were calculated using computer software package, AutoCAD 2004. From the three angles formed by the Eye-ear plane ($OT_1$ or FH plane) and the ala-tragal lines, the one closest to the angle formed between Eye-Ear plane ($OT_1$) and occlusal plane (OP) was used to determine the occlusal plane of orientation. The obtained results were subjected to ANOVA F test, Tukey's Honestly significant difference test, followed by Karl Pearson coefficient of correlation test. P values of less than 0.05 were taken as statistically significant. RESULTS. The mean of base line angle i.e. $OT_1$-OP angle ($11.96{\pm}4.36$) was found to be close to $OT_1-AT_2$ angle ($13.67{\pm}1.93$) and $OT_1-AT_3$ angle ($10.31{\pm}2.03$), but $OT_1$-OP angle was found to be more closer to $OT_1-AT_3$ angle. Comparison of mean angles showed that $OT_1$-OP angle in both males (11.68) and females (12.51) is close to $OT_1-AT_3$ angle (males- 11.01, females- 11.95). CONCLUSION. The line joining from ala to the lower border of the tragus was parallel to the occlusal plane in 53.3% of the subjects. There was no influence of the sex on the level of occlusal plane.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.2
• /
• pp.109-123
• /
• 2009

The aim of the study was to assess the influence of insertion torque of bone quality and to compare axial force, moment and von Mises stress using finite element analysis of plastoelastic property for bone stress and strain by dividing bone quality to its thickness of cortical bone, density of trabecular bone and existence of lower cortical bone when implant inserted to mandibular premolar region. The $Br{\aa}nemark$ MKIII. RP implant and cylindrical bone finite model were designed as cortical bone at upper border and trabecular bone below the cortical bone. 7 models were made according to thickness of cortical bone, density of trabecular bone and bicortical anchorage and von Mises stress, axial force and moment were compared by running time. Dividing the insertion time, it seemed 300msec that inferior border of implant flange impinged the upper border of bone, 550msec that implant flange placed in middle of upper border and 800msec that superior border of implant flange was at the same level as bone surface. The maximum axial force peak was at about 500msec, and maximum moment peak was at about 800msec. The correlation of von Mises stress distribution was seen at both peak level. The following findings were appeared by the study which compared the axial force by its each area. The axial force was measured highest when $Br{\aa}nemark$ MKIII implant flange inserts the cortical bone. And maximal moment was measured highest after axial force suddenly decreased when the flange impinged at upper border and the concentration of von Mises stress distribution was at the same site. When implant was placed, the axial force and moment was measured high as the cortical bone got thicker and the force concentrated at the cortical bone site. The influence of density in trabecular bone to axial force was less when cortical bone was 1.5 mm thick but it might be more affected when the thickness was 0.5 mm. The total axial force with bicortical anchorage, was similar when upper border thickness was the same. But at the lower border the axial force of bicortical model was higher than that of monocortical model. Within the limitation of this FEA study, the insertion torque was most affected by the thickness of cortical bone when it was placed the $Br{\aa}nemark$ MKIII implant in premolar region of mandible.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.1
• /
• pp.46-52
• /
• 2009

The purpose of this study was to compare the skeletal maturation of cervical vertebrae according to vertical skeletal patterns in the adolescents. Lateral cephalograms of 198 subjects(10 years old), 216 subjects(12 years old), and 138 subjects(14 years old) were reviewed, and subjects were classified according to vertical skeletal patterns. The 30 subjects were selected with the greatest predominance of vertical growth, and the other 30 subjects, with the greatest predominance of horizontal growth; these subjects comprised the vertical and horizontal groups, respectively. For evaluating of skeletal maturation, the concavity of inferior border and verticohorizontal ratio of cervical vertebrae were observed and measured according to age. The measurements were analyzed statistically by SPSS computerized program. The results were as follows : In general, the concavity of the inferior border of the cervical vertebrae was greater in the horizontal group than the vertical group in all of the 10, 12, 14 year olds, but was not statistically significant. The vertico-horizontal ratio of the 3rd and 4th vertebra of the horizontal groups was a significantly larger than the vertical groups in 12 year olds but did not show any statistical significance in 10 and 14 year olds. There were a weak negative correlations between SUM, FMA and the vertico-horizontal ratio for each groups at 12 ages.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.1
• /
• pp.77-82
• /
• 2011

A long-term follow-up study of a case of impacted teeth associated with a large dentigerous cyst in the left maxilla is presented. The patient was a 30-year-old man who had a large dentigerous cyst in the premaxilla and left posterior maxilla, which impacted the canine and supernumerary tooth. This is one of the most prevalent types of odontogenic cysts associated with an erupted or developing tooth, particularly the mandibular third molars. The other teeth commonly affected in order of frequency are the maxillary canines, maxillary third molars and rarely, the central incisor. Radiographically, the cyst appears as huge ovoid well-demarcated unilocular radiolucency with a sclerotic border and causes ectopic displacement of the inferior border of the maxillary sinus without destruction. Dentigerous cysts may grow unnoticed to such extensive sizes as to occupy a considerable portion of the maxillary sinus. These cysts appear to be associated with a supernumerary tooth in the maxillary anterior incisors region called the mesiodens and impacted canine. The present case report describes the surgical enucleation of a dentigerous cyst involving the permanent maxillary left canine and mesioden. After surgery, left maxillary sinus recovered their normal size and apposition of bone was observed around the apex of the posterior teeth. During the subsequent years, there was no recurrence of the cystic lesion but the inflammation was evoked in the anterior maxilla after 42 months. This complication appeared to have correlated with bony healing in the enucleation site of the cyst. We report the healing status of a huge dentigerous cyst in the maxilla for 5 years with a review of the relevant literature.

• Journal of Korean Foot and Ankle Society
• /
• v.13 no.2
• /
• pp.138-141
• /
• 2009

Purpose: Regardless of potential and actual complications, the sesamoidectomy either tibial side or fibular side or both, had been used as a surgical option for various pathologic conditions. The objective of this cadaveric study was to identify the changes of range of motion of great toe after sesamoidectomy. Material and Methods: Eight fresh cadaver legs were used. The angular changes of the hallucal articulations were measured by traction of the flexor hallucis longus tendon at the proximal border of fibro-osseous tarsal tunnel and by traction of the extensor hallucis longus tendon at the superior border of inferior extensor retinaculum. The measurement started at neutral position and proceeded to the maximum for respective tendons. After sesamoidectomy either partial or total, same procedures were repeated and the angular changes were measured. Results: In flexion of great toe, there were significant metatarsophalangeal angular differences at 1 cm traction in total sesamoidectomy and lateral sesamoidectomy. In extension of great toe, there were significant metatarsophalangeal angular differences at more than 2 cm traction in total sesamoidectomy. In other measurements, there were no significant angular changes of the hallucal articulations. Conclusion: The sesamoidectomy resulted in change of motion of great toe. Statistical analysis showed that the significant increases in the initial flexion and maximal extension occurred with total sesamoidectomy and the significant increase in the initial flexion occurred with lateral sesamoidectomy.