• Journal of the Korean Society of Safety
• /
• v.29 no.3
• /
• pp.91-97
• /
• 2014

This study aims to suggest a measure to reduce industrial accident and secure adaptation to the industrial safety regulation policies by empirically establishing the effects of stress from adaptation to the industrial safety regulation on the human error, one of direct causes of industrial accident to the target groups of the industrial safety regulation policies. This study as for content range examines the stress from adaptation to the industrial safety regulation, job satisfaction, human error, and as for spatial range, this study performed an empirical research on the workers of 24 companies located within Chungcheong region centers district among 153 companies nationwide that uses 7 chemicals by introducing PSM (process safety management) system of the Ministry of Employment & Labor as of January 2012. Based on these results and suggestions there are five(5) necessities to reduce industrial safety regulations adaptation stress and human error generation, first(1st) is the necessity of understanding influential factors to stress, second(2nd) is the necessity to customized vocational training, third(3rd) is improving enhance system of job satisfaction, forth(4th) is preparing stress-reduction program, and fifth(5th) is introducing on-site restrictive action of advanced country as politics items.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.22-29
• /
• 2012

Robot related injuries in industrial accidents statistics during 2008~2010 have accounted for a total of 109 cases equivalent to 30~40 cases for each of those years. The number of injured compared to the dissemination of industrial robots(51,302 units/2004) can be regarded as quite low. However, the fatal injuries sustained by 7 (6.4%) out of 109 cases paints the stark reality of robot-related accident fatalities. It is a sad probability that as the automation process expands its use of industrial robots which have increased significantly in demand, the incidence of workplace accidents will also increase. Therefore, the incidence of accidents throughout the period of 2008~2010 has been analysed to prevent the injuries due to the increased use of industrial robots. In the analysis, the injuries occurred during the industrial robot operation accounted for 45.9% of the entire accidents. Thus, we examined the present status of the industrial robot operation to analyze the root cause of accidents occurred in our studied time period. We looked at a total of 469 workplaces. 456 workplaces responded in the year 2009 and survey studies were implemented at 13 of the 29 workplaces where work injuries were sustained in the year 2010. Even where protective measures and interlock devices were in place, our studies indicated that workers could access the robot area to perform the tasks in 188 sites(40.1%). Also, the 143 sites(30.5%) had control measures and equipment located in the safety fence. In addition, the robots found at 164 sites(35.0%) could be restarted without additional restarting operation. These three causes accounted for most of the workplace injuries during the industrial robot operations. Futhermore, we confirmed the fact that the protective measures of the current safety regulations were not strictly enforced. Based upon our studies and the investigation of the present status of the industrial robot operation, higher standards in training and supervision of workers in the robot operation must quickly be met in order to prevent these industrial injuries.

• Journal of the Korean Society of Safety
• /
• v.35 no.1
• /
• pp.45-52
• /
• 2020

Construction industry has a relatively higher industrial accident rate than other domestic industries. Thus, to reduce the accident rate, researches on the methodology of worker's safety education combined with new technologies like IT technology have increased. In the light of workers' safety information provision, this study develops a VR(Virtual Reality)-based construction site using the BIM(Building Information Modeling) data. The target structures and geographical features are included in the VR-based construction site where the construction machinery model and worker model are also created using a game engine. For highly effective provision of safety information, video clips with suitable captions corresponding to working processes were made with proper screen directing. They should be appropriately connected to correct worker's operations to improve the work commitment level, sense of reality and inducement of interest. From this scenario, the 3D VR-based construction site, which can be experienced through a VR equipment, was created and in the same platform, the safety information was provided by the video clip combined with the suitable captions. Although the real construction site involves various requirements depending on field situation and the expertness and experience of workers are not consistent, the developed safety information provision based on the VR construction site is expected to effectively reduce the incomplete factors leading to construction accidents by improving the worker's perception of workplace safety.

• Nuclear Engineering and Technology
• /
• v.53 no.1
• /
• pp.234-243
• /
• 2021

In the research or project planning for the decommissioning of a nuclear power plant, one of several preparations will be the establishment of a list of potential radionuclides to be considered at the time of characterization or final status surveys. Reliable data for selection of potential radionuclides during the transition period to prepare for decommissioning will depend heavily on historical data at the site or, where possible, sampling analysis. However, during the transition period, direct sampling can be challenging, depending on the circumstances of the site or national regulation. A methodology of selecting potential radionuclides for nuclear facility sites which largely consists of three major processes: production of initial list of radionuclides, selection of the insignificant radionuclide that will be eliminated, and consideration of site characterization or sampling. For developing a preliminary list of potential radionuclides for Kori Unit 1 decommissioning, the list of initial radionuclides was made referring to the technical documents applied at decommissioned NPPs in the U.S and additional reference materials applied until the operation of NPPs in Korea. For the screening of insignificant radionuclides, we applied criterion of less than 0.1% of the amount of radioactivity inventory and confirmed the dose fraction using the RESRAD code. The final suit of radionuclides was established, which should be supplemented by reflecting site characterization and sampling process in the future. Thus, the methodology and results for the selection of potential radionuclides suggested in this paper can give an insight as a future reference to deriving DCGLs in relation to site remediation of decommissioning nuclear plants.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.3 no.1
• /
• pp.127-139
• /
• 1993

In order to obtain basic information for the extablishment of effectivce industrial safety programmes in heavy industries & construction companies, accident records for 366 injured workes were collected from January, 1989 to December 1991 and analyzed. The results were as follows : 1. The over-all incidence rate of industrial accidents was 2.98% per year 2. Accidents were common in the workers who are in thirties and twenties. 3. According to the duration of services, the workers with jobs on above than 3 years was the most frequent victims (64.2%) 4. According to the view point of working time, the highest incidence was observed just before the end of the work (17:00-19:00). 5. According to the month of year, the incidence was higher in August(14.0%) and May(14.2%), and lowest in January (3.3%) 6. The most common type of accidents was overexertion (24.9%). 7. According to the job, the highest incidence was observed fabrication. 8. According to the site of injuries, the incidence was higher the truck (27.0%) and fingers (25.1%).

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.5
• /
• pp.562-573
• /
• 2008

Concentrations of volatile organic compounds (VOCs) measured from the local industrial sources in Wanju industrial complex during June $2007{\sim}January$ 2008. The samples were collected from the primary sources (6 emission points) in 4 major factories in Wanju industrial complex as well as two general sources in Wanju County to elucidate the abundances of speciated VOCs and their spacial and temporal distributions depending on source bases. Industrial sources are as follows; fabricated metal manufacture, motor vehicle manufacture, rubber and plastic manufacture, and chemical manufacture factories. Two general source samples were collected from gasoline gas station and dry cleaning shop in urban area. In order to understand the near source influence at receptor, samples from the two receptor sites (one is at center of the industrial complex and the other site is at distance residential area downwind from the center) were collected with sample canister, and analyzed by using GC/MSD. The concentrations from different sources were compared and discussed. The mass contributions of the speciated VOCs to total VOCs measured from industrial sources and ambient ai r at two receptors were presented and discussed.

• Journal of Korean society of Dental Hygiene
• /
• v.10 no.1
• /
• pp.185-195
• /
• 2010

Objectives : The purpose of this study is to opportunity of oral examination and positively utilizing the oral-health educational method of being preferred on the basis of the contents promote workers' oral health. Methods : This study carried out questionnaire research by self-administrated method, which was selected by convenience sampling method, from February 9th to March 6th, 2009 targeting 237 workers where are located in Gunsan city of Jeollabuk-do Province. Results : 1. Workers' interest and recognition of importance in oral health were high, and were low in subjective oral-health knowledge level, on the other hand. 2. Workers were indicated to be high in the response rate of work-site oral examination and, on the other hand, to be high in the dissatisfied rate at work-site oral examination. 3. As for work-site oral examination, the workers were indicated to positively recognize participation in work-site oral-health education along with high necessity. 4. Workers were indicated to prefer the most a method of lecture such as dentist along with contents in prevention and curing method of periodontal disease. Conclusions : An efficient result is thought to be probably obtained given offering an opportunity of oral examination and positively utilizing the oral-health educational method of being preferred on the basis of the contents with the highest preference, in order to promote workers' oral health.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.3
• /
• pp.1043-1064
• /
• 2020

A kind of Subjective Imaging Effect Assessment (SIEA) method and its applications on intelligent imaging terminal design in engineering site are presented. First, some visual assessment indices are used to characterize the imaging effect: the image brightness, the image brightness uniformity, the color image contrast, the image edge blur, the image color difference, the image saturation, the image noise, and the integrated imaging effect index. A linear weighted function is employed to carry out the SIEA computation and the Analytic Hierarchy Process (AHP) technique is used to estimate its weights. Second, a SIEA software is developed. It can play images after the settings of assessment index or assessment reaction time, etc. Third, two cases are used to illustrate the application effects of proposed method: the image enhancement system design for surveillance camera and the imaging environment perception system design for intelligent lighting terminal. A Prior Sequential Stimulus (PSS) experiment is proposed to improve the evaluation stability of SIEA method. Many experiment results have shown the proposed method can realize a stable system design or parameters setting for the intelligent imaging terminal in engineering site.

• Journal of Engineering Education Research
• /
• v.23 no.2
• /
• pp.49-60
• /
• 2020

The purpose of this study is to empirically verify whether there are differences according to group characteristics in the effect of job characteristic requirements on practice performance in university long-term on-site training. Specifically, the relationship between job characteristics (job scope, job content, coaching, benefits), practical satisfaction, and occupational competencies was examined according to the group characteristics (gender types, major types, corporation types). For this purpose, the survey data were collected and analyzed for 752 students who participated in K university long-term on-site training. As a result of the analysis, first, it was found that the job characteristics (job scope job content, coaching, benefits) had structural relationship affecting occupational competence through mediation of practice satisfaction. Second, As for the differences according to the group characteristics, there were differences in the relations. Based on the result, theoretical and practical implications and follow-up studies were proposed.

• Journal of Environmental Impact Assessment
• /
• v.22 no.1
• /
• pp.79-87
• /
• 2013

The purpose of this study is to establish PM-10 management manual for developing large scale sites by assessing the status of PM-10 reduction at ongoing large scale development sites. After analyzing the meteorological conditions and air quality characteristics of Sihwa MTV development site, ISCST3 (Industrial Source Complex Short Term Model 3) was implemented to predict PM-10 generation. The outcomes of ISCST3 modelling were utilized for verification of site survey data. As a result of applying air pollution modeling, the diffusion rate of PM-10 decreases according as the wind speed decreases. And the emission rate of PM-10 increase is linear to the concentration of PM-10. The reduction target of PM-10 can be derived quantitatively from the difference between the forecasted emission rate and the permissible emission limit of PM-10. The assessment of PM-10 characteristics which is deduced from ISCST3 and site survey can be practically applied to accomplish environmentally acceptable air quality manual for large scale development sites.