• 한국인터넷방송통신학회논문지
• /
• 제19권6호
• /
• pp.47-55
• /
• 2019

제조 패러다임 변화에 따라 다양한 협동로봇이 신규시장을 창출하고 있다. 협동로봇은 기존 산업용 로봇 대비 쉬운 운용, 생산성 향상, 단순 작업을 하는 인력을 대체하는 목적으로 모든 산업에서 협동로봇의 수요가 증가하고 있다. 그러나 산업현장에서 협동로봇으로 인한 작업 중 사고가 빈번하게 발생하고 있으며, 작업자의 안전을 위협하고 있다. 인간 중심의 환경에서 로봇을 통한 산업현장이 구성되려면 작업자의 안전을 보장해야 하며 출동 가능성을 업애고 신뢰할 수 있는 통신을 하는 협동로봇 가드 시스템의 개발의 필요성이 있다. 센서 및 컴퓨터 비전을 통해 협동로봇의 작업 반경 내에서 발생하는 사고를 이중으로 방지하고 안전사고 위험을 감소시켜야 한다. 다양한 산업용 장비와 통신을 위한 국제 프로토콜인 OPC UA를 기반으로 시스템을 구축하고 초음파 센서와 CNN(Convolution Neural Network)적용한 영상 분석을 통한 협동로봇 가드 시스템을 제안한다. 제안 된 시스템은 작업자의 불안전한 상황에서 로봇 제어의 가능성을 평가한다.

• 한국소음진동공학회논문집
• /
• 제13권11호
• /
• pp.838-844
• /
• 2003

The noise and vibration reduction schemes of an industrial robot are studied. Experimental procedures are employed to examine the sources of robot noise. A parametric study is undertaken to observe the effects of each part such as gear, shaft and housing on the sound pressure level. After the part which mainly effects on the noise is proved, we propose countermeasures for reducing the noise and vibration of the robot system.

• 한국소음진동공학회논문집
• /
• 제21권1호
• /
• pp.41-46
• /
• 2011

In this paper, we experimentally investigate factors that decrease in noise of a industrial take-out robot at driving state. For this, we analyse change in the noise of the take-out robot with gear machining accuracy and clearance. In order to calculate the noise related to gear machining accuracy that is based upon the Japanese Industrial Standard(JIS), we equally increase motor speed from 0 rpm to 1250 rpm. In addition, to investigate influence of clearance on noise, we evenly change clearance from 0.5 mm to 1.2 mm. These experiments show that clearance is more effective factor than gear machining accuracy to reduce the noise of the take-out robot.

• 제어로봇시스템학회논문지
• /
• 제11권7호
• /
• pp.595-601
• /
• 2005

A mobile robot system utilizing NDT (Non-Destructive Testing) method is designed and fabricated f3r automatic integrity evaluation of large sized industrial reservoirs and pipelines. The developed mobile robot can crawl over the outer surface of the industrial facilities even though the shape of the structures is various and unsymmetric. The robot detects defects such as pinholes, cracks and thickness reduction at the wall of the facilities using EMAT (Electro-Magnetic Acoustic Transducer). Image processing technology for weld line detection at the surface of the target and host programs including defect detecting algorithms are also developed. Automation of defect detection for these kinds of large facilities using mobile robots is helpful to prevent significant troubles of the structures without danger of human beings under harmful environment.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.745-750
• /
• 2008

Uncertain dynamic parameters and joint flexibility have been problem to control robot manipulator precisely. Hence, even if the controller tracks the desired trajectory well with the feedback of the motor encoders, it is hard to achieve the desired behavior at the end-effector. In this paper, robot trajectory is taught by a general heuristic iterative learning control (ILC) algorithm in order to reduce tracking error of the tool center point (TCP) and the results of tracking with 6 DOF industrial robot manipulator are presented. The performance is verified based on ISO 9283.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.250-255
• /
• 2002

We developed a Off-Line Graphic Simulator which can simulate a robot model in 3D graphics space in Windows 98 version. 4 axes industrial robot was adopted as an objective model. Forward kinematics, inverse kinematics and robot dynamics modeling were included in the developed program. The interface between users and the off-line program system in the Windows 98's graphic user interface environment was also studied. The developing language is Microsoft Visual C++. Graphic libraries, OpenGL, by Silicon Graphics, Inc. were utilized for 3D graphics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1986년도 하계학술대회논문집
• /
• pp.97-109
• /
• 1986

The ultimate goal of an industrial robot is to make full use of its real ability to communicate with any given intelligent device, and to do so independently of hardware, architecture and languages. This paper describes the necessary functions of a robot used in an integrated manufacturing system, and the basic philosophy of organization as applied to the robot controller. An example of a machine vision system called MYVIS is reviewed in relation to MAP and LAN in a practical cell application.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2004년도 춘계 학술발표대회 논문집
• /
• pp.324-325
• /
• 2004

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.551-556
• /
• 1991

This paper deal with the solution of kinematics and inverse kinematics of industrial FANUC robot by the bisection method with IBM PC 386. The inverse kinematics of FANUC robot cannot be solved by the algebraical method, because arm matrix T$_{6}$ is very complex and 6-joint angles are associated with the position and the approach of end-effector. Instead we found other 5-joint angle by an algebraical method after finding .theta.$_{4}$ value by a bisection method.d.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.528-533
• /
• 1988

Recently the needs for industrial robot system of high speed continuous path motion such as sealing application have been increasing. To apply to this kinds of work, dynamic analysis for Hyundai 8601 robot has been carried out by experiment. For the good design of high performance robot manipulator, accurate analysis of dynamic characteristics is important especially for current semi-closed loop control type industrial robots.