• 대한공업교육학회지
• /
• v.37 no.1
• /
• pp.165-182
• /
• 2012

The purpose of this study was to develop practical arts' lesson plan for creativity and personality. In order to achieve the objectives of the study creativity and personality factor were derived on the basis of previous research and literature review and expert groups to develop lesson plan through the modification of the validity assessment. This study was conducted in three phases: preparation, development, and improvement. In the preparation phase, educational needs of teachers were developed and analyzed. And theme for activity was selected. In the development phase, activity were selected based on the contents of practical arts and presentation of educational objective, development of lesson plan. In the improvement phase, the lesson plan was completed through the modification of the validity assessment by expert group. The characteristics of the developed lesson plan were followings; First, Developed lesson were based on the contents of practical arts for creativity and personality Second, Developed lesson were designed for project method. Third, this developed lesson plan is made up of six parts 'Study cook', 'Cooking lunchbox for health', 'Cooking fusion food', 'Sowing and growing sprouts', 'Cooking with growing sprout', 'Food for life exhibition'. Forth, developed lesson plan can use practical arts class and creative activity class.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.2
• /
• pp.183-190
• /
• 2015

An ejector is a type of non-powered pump that is used to supply a secondary flow via the ejection of a primary flow. It is utilized in many industrial fields, and is used for fueling the vehicle because of less failures and simple structure. Since most of ejectors in industry are gas-to-gas and liquid to gas ejector, many research activities have been reported in optimization of gas ejector. On the other hand, the liquid ejector is also applied in many industry but few research has been reported. The liquid ejector occurs cavitation, and it causes damage of parts. Cavitation has bees observed at the nozzle throat at the specified pressure. In this study, a two-dimensional axisymmetric simulation of a liquid-liquid ejector was carried out using five different parameters. The angle of the nozzle plays an important role in the cavitation of a liquid ejector, and the performance characteristics of the flow ratio showed that an angle of $35^{\circ}$ was the most advantageous. The simulation results showed that the performance of the liquid ejector and the cavitation effect have to be considered simultaneously.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.4
• /
• pp.310-317
• /
• 2008

The objective of the survey is to define and judge exposure profiles semi-qualitative data in high risk processes using styrene. The survey was conducted on 98 factories out of 229 factories based on data from periodic working environment monitoring for styrene. Styrene is widely utilized as a raw material for PS and co-polymers such as ABS, SAN, SBR, SBL, unsaturated polyester resins(UPR) and others. An approximate breakdown of styrene's markets in Korea is PS 30%, expandable PS 17%, ABS 33%, SAN 5%, SBL 4%, SBR 3%, UPR 1% and other 7%. Although UPR accounts for 1% of total amount of styrene, workers dealing with it are exposed to very high concentrations up to 64 ppm. Especially styrene is widely used in the laminating process of fiberglass reinforced plastics(FRP) manufacturing industry. The Applications using styrene are largely classified into two sections which are applied to styrene monomer(SM) and UPR. SM is utilized for a raw material of resins, surfactant and adhesive. UPR is employed for FRP and non-FRP. For SM control targets are mixing colors and packing in the gelcoat resins manufacturing industry(MI), for UPR control targets out of works using UPR are 1) laminating in the MI of plastics, automobile parts and boats, 2) mixing and packing in the SMC/BMC MI, 3) molding and cutting in the other specific plastics MI, 4) mixing and coating in artificial marble product MI, 5) dipping in the electric motors & transformers MI, 6) molding in the button MI, 7) painting in the musical instrument MI. Findings from the study have given the information for the high risk processes and working practices so that occupational health professionals could focus on targeted workplaces to prevent occupational diseases. It is also useful to develop a control strategies and specific controls for high risk processes and facilities using styrene.

• The Journal of the Korea Contents Association
• /
• v.17 no.10
• /
• pp.559-566
• /
• 2017

Despite the government operating various preventive programs to ward off accidents and diseases on business sites, diseases rates are not decreasing, unlike accident rates. In many cases, diseases caused by work have a latent period before symptoms appear or progress over a longer term, making it difficult for workers to prove the causal relation between their work and the diseases. Moreover, data related to the business site are mostly owned by the employer. Even if the employee has access to parts of such data, his lack of medical expertise limits his ability to identify the characteristics of the diseases and how it appears. In August, 2017 the Supreme Court did an about-face with its ruling on the case involving diseases caused by exposure to harmful substances in work environments, by easing the burden of proof on the employees. As such, this study focuses on the case to analyze cases involving diseases that have occurred in work environments and present their implications. In doing so, the study seeks to provide a basic set of data that can help secure the employees' labor rights and rights to health by complementing the current law in relation to recognizing industrial incidents caused by rare diseases and making work environments safer for employees.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.4
• /
• pp.421-428
• /
• 2006

Systematic improvement of the environmental performance of industrial products is a core element of good business. Improving the overall environmental performance of products is envisaged as one of the most important strategic goals and objectives in many company policies. This paper demonstrates an Ecodesign approach to develop a product in a systematical way. The objective of this research is two-folds-describing a systematic procedure of implementing Ecodesign in a company and giving a real case example to demonstrate the application of the proposed Ecodesign methodology. The methodology was based on Wimmer et al and consists of seven steps out of the twelve steps for integrating significant environmental aspects of a product and environmental issues resulting from the stakeholder requirements into product design and development. Together with the Ecodesign team of a major domestic car manufacturer the Ecodesign of a car fuel tank unit has been chosen for the case study presented in the paper. The application of the proposed methodology to the fuel tank unit of a car indicates that practical target specifications of the fuel tank unit were derived systematically. This indicates that the seven steps approach can be a viable Ecodesign method for manufacturers to integrate environmental aspects of their products into their product design and development processes.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.4
• /
• pp.239-247
• /
• 2013

Recently renewable energy such as offshore wind energy takes a higher interest due to the depletion of fossil fuel and the environmental pollution. This paper deals with multi-body dynamics (MBD) analysis technique for offshore wind turbine system considering aerodynamic loads and Thevenin equation used for determination of electric generator torque. Dynamic responses of 5MW offshore wind turbine system are evaluated via the MBD analysis, and the system is the horizontal axis wind turbine (HAWT) which generates electricity from the three blades horizontally installed at upwind direction. The aerodynamic loads acting on the blades are computed by AeroDyn code, which is capable of accommodating a generalized dynamic wake using blade element momentum (BEM) theory. In order that the characteristics of dynamic loads and torques on the main joint parts of offshore wind turbine system are simulated similarly such an actual system, flexible body modeling including the actual structural properties are applied for both blade and tower in the multi-body dynamics model.

• 대한공업교육학회지
• /
• v.39 no.2
• /
• pp.81-100
• /
• 2014

This study developed training program to educate professional workers for software industry with growing importance in this area as software industry takes more parts in Korean economy. Additionally, this study developed the program based on national competency standards(NCS) using structured on the job training(S-OJT), For this study, we reviewed economic index about software industry such as economic ratio and the influx of the workforce. Also literature review for S-OJT was conducted to explore its concept for better application of the concept to the program development. In addition, this study used training program development manual suggested by Korean Department of Labor. We selected specific job which needs training program to be developed based on thorough needs analysis for a company A. Previously developed NCS and other documents were reviewed and focus group interviews were conducted to find out core knowledge and skills for the job. 44 training programs were developed and objective of each program, hours, contents and methods were also suggested. Additionally detailed program name, education system, road map and operation strategy were developed and suggested. The result of this study is expected to contribute to other industry and jobs which are facing to the development of NCS based education program by suggesting detailed stage of development process. For more animated development of education program using NCS, the effect of the program should be tested in the future. For the test, appropriate evaluation methods and measures should be developed as well.

• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.379-384
• /
• 2005

Polyurethane foams (PUFs) were prepared from polymeric 4,4'-diphenylmethane diisocyanate (PMDI), seven polyols with different functionalities and OH values, silicone surfactant, two catalysts, and three blowing agents. Chlorofluorocarbon (CFC-11), hydrochlorofluorocarbon (HCFC-141b) and hydrofluorocarbon (HFC-365mfc) were used as blowing agents. The effect of gelling and blowing catalysts on basic properties and cell structure of PUF with HCFC-141b was investigated. The cell size of the PUF decreased with an increase in the amount of catalyst from 0 to 2 pph (parts per hundred polyol). In the case of gelling type catalyst, the compressive strength increased from 11.9 to $12.66kg_f/cm^2$ with an increase in the amount catalyst from 0 to 2 pph but the density did not change significantly. The gelling time, density, and compressive strength of the PUF with three different blowing agents were measured. There was no detectable change in their properties. However, the cell structure of PUF with HCFC-141b was not uniform as in the other systems.

• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.348-353
• /
• 2005

The extracts from natural and fermented products such as Artemisia plants, Rhodiola Salientness, fermented soybeans and soybean paste were used to investigate the whitening effect. 10 g of Artemisia plant were added to 300 mL of ethanol and extracted by sonification at room temperature for 3 h. The extract was further partitioned by the equal volume percent in the order of the n-hexane, chloroform and ethyl acetate. 5 g of Rhodiola salientness was also added to 150 mL of methanol and extracted at the room temperature for 12 h. The effluents from a chromatographic column ($3.9{\times}250mm$, $C_{18}$, $15{\mu}m$) were collected and concentrated in two parts. The extraction of fermented soybeans and soybean paste were done by 60% ethanol. In this work, tyrosinase inhibitory activity and melanin inhibitory effect were measured to confirm the whitening effect. The water layer of Artemisia princeps Pampan showed the good inhibitory of antioxidant, while the hexane layer of Artemisia iwayomogi Kitamura and the chloroform layer of Artemisia princeps Pampan had the excellent melanin inhibitory effect. The Rhodiola salientness had the superior whitening effect to the arbutin in in-vivo melanin production ratio assay. However, the fermented soybeans and soybean paste did not show any whitening effect.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.4
• /
• pp.437-445
• /
• 2019

After the permanent shutdown of K1 in 2017, decommissioning processes have attracted great attention. According to the current decommissioning roadmap, the dismantling of the activated components of K1 may start in 2026, following the removal of its spent fuel. Since the reactor vessel (RV) and reactor vessel internal (RVI) of K1 contain massive components and are relatively highly activated, their decommissioning process should be conducted carefully in terms of radiological and industrial safety. For achieving maximum efficiency of nuclear waste management processes for K1, we present activation analysis of the segmentation process and waste classification of the RV and RVI components of K1. For RVI, the active fuel regions and some parts of the upper and lower active regions are classified as intermediate-level waste (ILW), while other components are classified as low-level waste (LLW). Due to the RVI's complex structure and high activation, we suggest various underwater segmentation techniques which are expected to reduce radiation exposure and generate approximately nine ILW and nineteen very low level waste (VLLW)/LLW packages. For RV, the active fuel region and other components are classified as LLW, VLLW, and clearance waste (CW). In this case, we suggest in-situ remote segmentation in air, which is expected to generate approximately forty-two VLLW/LLW packages.