• Elastomers and Composites
• /
• v.15 no.3
• /
• pp.147-154
• /
• 1980

The cellular rubber products for industrial purpose have been applied in many fields such as auto-motive parts, ship-building, machinery, sports goods, diving suit or interior housings etc. The purpose of this dissertation is to study the physical properties of celluar rubber products particulary for those elastomers such as EPDM, CR and NBR with heat resistance property, weather proofness, and oil resistance characteristics respectively, aiming at improving their quality, and renovating the manufacturing know-how which is beyond our technical power at the present time in Korea. In order to meet this requirement an ideal recipe is being shown for the three elastomers, and also a practical recipe which is easily available in terms of compounding ingredients in domestic market has set up as shown in Table 1. for the investigation of vulcanization characteristics by means of Rheometer. The optimum Mooney viscosity of compounded rubber was found to be approximately $ML_{1+4}(100^{\circ}C)$ $30\sim45$. Excess mustication makes a dispersion of ingredients worse, consequently it causes deformation of shapes and heterogenous cell distribution. In other words the articles are rejected because of its insufficient workmanship. The results of physical properties of the products are indicated in Table 3. It has shown that the quality meet requirement when tested in accordance with ASTM D572, 573 and D 395. The test results o CR/IR blends in terms of hardness, volume change by blowing, tensile strength and elongation have been shown.

• Safety and Health at Work
• /
• v.12 no.3
• /
• pp.339-345
• /
• 2021

Background: Some researchers state that they are not yet able to provide a deep understanding of the underlying causes of unsafe behaviors (UBs). Therefore, the present study was conducted to investigate the attitudes and experiences of Iranian workers of UBs. Methods: This present study was conducted in 35 industries using a semistructured interview based on grounded theory. Forty participants were interviewed, including 13 industrial safety and health experts and 27 workers and supervisors. The analysis of the present study consisted of a three-step coding process including open, axial, and selective coding. Results: The results showed that the factors affecting UBs could be classified into three categories: organizational, individual, and socioeconomic factors. Organizational factors were divided into 6 parts: procedure and environmental conditions, communications, monitoring, organizational safety culture, resource allocation, and human resources. Socioeconomic factors had three subcategories: community safety culture, type of organizational ownership, and economic problems. Finally, the individual factors were classified into two categories of personality traits and individual competence. Conclusion: The results showed that organizational factors were the most categorized, and it is estimated that this factor has a more important role in the UBs. Of course, to better understand the close relationship between these factors and find the weight and importance of each factor, it needs to measure it with multicriteria decision systems.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.5
• /
• pp.135-141
• /
• 2021

As a trend of lightening automobiles and electronic products, several studies are currently underway to replace parts of metals with resins. In particular, heterojunctions between metals and resins are now under the spotlight. This study aims to evaluate the variation in bonding strength with process conditions when the polybutylene terephthalate (PBT) polymer is bonded to a specimen of the lightweight 6061 aluminum alloy (AL6061). Conditions of the bonding surface of the AL6061 specimen, the temperature of the injection mold, and the content of the glass fiber were considered to be process variables. Bonded specimens were manufactured for different values of these variables. Bonding strength tests were then performed on these specimens and variations were analyzed in their characteristics corresponding to those of the process conditions. Fractures in these specimens were assessed using scanning electron microscopy (SEM) to assess the fracture surface. This was then used to analyze the fracture shape and determine whether anodizing the specimen led to the development of cracks on the joint surface. Results of the above test indicated that while the surface condition of the specimen and the temperature of the injection mold significantly influenced the strength of bonding, the content of the glass fiber did not.

• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.659-663
• /
• 2021

10 m³/min (CMM) multi-pollutants abatement system was successfully developed by effectively integrating ozone oxidation, wet scrubbing, and wet electrostatic precipitation for the simultaneous removal of particulate matters (PMs) and NOx in a semiconductor fabrication process. The sophisticated control and optimization of operating parameters were conducted to maximize the destruction and removal efficiency of NOx. In particular, the stability test of a wet electrostatic precipitator was carried out in parallel for 30 days to validate the reliability of core parts including a power supply. An O₃/NO ratio, which is the most important operating parameter, was optimized to be about 1.5 and the optimization of wet scrubbing with a reducing agent made it possible to analyze the contribution of neutralization reaction.

• Food Engineering Progress
• /
• v.15 no.3
• /
• pp.214-220
• /
• 2011

$\beta$-Glucosidase enzyme reaction under high hydrostatic pressure was investigated in terms of physical chemistry. A model substrate (p-nitrophenyl-${\beta}$-D-glucopyranoside(pNPG)) was used, and the pressure effects on the enzymatic hydrolysis (pNPG${\rightarrow}$pNP) at 25 MPa, 50 MPa, 75 MPa, and 100 MPa were analyzed. Two parts of the reaction such as kinetic and equilibrium stages were considered for mathematical modelling, and their physicochemical parameters such as forward and inverse reaction constants, equilibrium constant, volume change by pressure, etc. were mathematically modeled. The product concentration increased with pressure, and the two stages of reaction were observed. Prediction models were derived to numerically compute the product concentrations according to reaction time over kinetic to equilibrium stages under high pressure condition. Conclusively, the $\beta$-Glucosidase enzyme reaction could be activated by pressurization within 100 MPa, and the developed models were very successful in their prediction.

• Journal of the Korea Convergence Society
• /
• v.10 no.6
• /
• pp.191-201
• /
• 2019

This study aims at understanding the fundamental characteristics of EV consumer based upon user survey and understanding the challenges to promote EV adoption in Korea. Data are obtained from two different surveys. One asked 304 EV buyers in Korea and another asked 905 prospective customer about EV awareness and perception, EV purchase intention, and etc. Analysis is composed of two parts; one is about the general characteristics and purchase intention of general consumers; another is about the intent to repurchase EV owners. We discuss the policy implications to expand EV demand in Korean market based on two purchase and repurchase logit models.

• Food Engineering Progress
• /
• v.21 no.3
• /
• pp.286-291
• /
• 2017

This study was conducted to certify the effect of aqueous extracts from fifty medicinal plants on the activities of alcohol dehydrogenase (ADH) and aldehyde dehydrogenase (ALDH) in vitro. Each aqueous extract was prepared by combining one-part medicinal plants with twenty-parts distilled water at $80^{\circ}C$ for 8 h. Among the fifty medicinal plants, Allium sativum L. and Cinnamomum cassia Presl were regarded as an effective anti-hangover substance. Allium sativum L. extract increased ALDH activity more than 2 times compared with ADH activity, enhancing the acetaldehyde degradation. Cinnamomum cassia Presl extract dramatically inhibited ADH activity compared with ALDH activity, thus potently decreasing the acetaldehyde formation. ADH and ALDH activities were proportionally inhibited according to the increased concentration of Cinnamomum cassia Presl extract. The aqueous extract of Cinnamomum cassia Presl at a concentration of $45.33{\mu}g/mL$ inhibited ADH activity by 52.8% and ALDH activity by 11.0%.

• Advances in aircraft and spacecraft science
• /
• v.6 no.2
• /
• pp.145-156
• /
• 2019

As the industrial desire for a step change in productivity within the manufacture of composite structures increases, so does the interest in Through-Thickness Reinforcement technologies. As manufacturers look to increase the production rate, whilst reducing cost, Through-Thickness Reinforcement technologies represent valid methods to reinforce structural joints, as well as providing a potential alternative to mechanical fastening and bolting. The use of tufting promises to resolve the typically low delamination resistance, which is necessary when it comes to creating intersections within complex composite structures. Emerging methods include the use of 3D woven connectors, and orthogonally intersecting fibre packs, with the components secured by the selective insertion of microfasteners in the form of tufts. Intersections of this type are prevalent in aeronautical applications, as a typical connection to be found in aircraft wing structures, and their intersections with the composite skin and other structural elements. The common practice is to create back-to-back composite "L's", or to utilise a machined metallic connector, mechanically fastened to the remainder of the structure. 3D woven connectors and selective Through-Thickness Reinforcement promise to increase the ultimate load that the structure can bear, whilst reducing manufacturing complexity, increasing the load carrying capability and facilitating the automated production of parts of the composite structure. This paper provides an overview of the currently available methods for creating intersections within composite structures and compares them to alternatives involving the use of 3D woven connectors, and the application of selective Through-Thickness Reinforcement for enhanced damage tolerance. The use of tufts is investigated, and their effect on the load carrying ability of the structure is examined. The results of mechanical tests are presented for each of the methods described, and their failure characteristics examined.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.4
• /
• pp.16-25
• /
• 2019

Recently, due to labor shortages in rural areas within South Korea, the demand for upland-field machinery is growing. In addition, there is a lack of development of systematic performance testing of upland-field machinery. Thus, this study examined structural safety and drawbar pull based on soil properties, as a first step for systematic performance testing on the test bed. First, the properties of soil samples from 10 spots within the experimental site were examined. Second, the strain was measured and converted into stress on 8 points of an onion harvester that are likely to fail. More specifically, the chosen parts are linked to the power, along with the drawbar pull, using a 6-component load cell equipped between the tractor and the onion harvester. The water content of the soil ranged between 5.7%-7.5%, and the strength between 250-1171 kPa. The test soil was subsequently classified into loam soil based on the size distribution ratio of the sieved soil. The onion harvester can be considered as structurally safe based on the derived safety factor and the drawbar pull of 115-1194 kgf, according to the working speed based on agricultural fieldwork.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.12
• /
• pp.69-74
• /
• 2018

The road name address is a two-dimensional location marking method for naming each road and assigning a number to each building. However, the road name address only shows the necessary parts for administrative and legal acts, and it does not properly display the main characteristics of various roads and non-residential areas. This has become more and more difficult to standardize different location identification methods, merely as a separate location identification method. This paper proposes road-based 3D location identification code to overcome the difficulties of integrating different location identification methods in Korea and to overcome the limit of 2D plane. This is a method to integrate various location identification methods based on roads and to identify spatial coordinates. It is a study on 3D digital coding of the land suitable for the 4th Industrial Revolution era.