• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.2
• /
• pp.1-8
• /
• 2011

The presence of high silica in bamboo hinders the use of this material for production of rayon grade pulp. Research has been carried out to overcome this deficiency and improve quality of rayon grade pulp with the modification in pulping and bleaching process. Effect of acid boosted water prehydrolysis, sulphuric acid pre-treatment of unbleached pulp, chlorination stage at lower pH and treatment of bleached pulp with $SO_2$ water were evaluated. Acid boosted water prehydrolysis of chips reduces prehydrolysis time by 50 minutes as compared to water prehydrolysis. Treatment of unbleached pulp with sulphuric acid reduces ash, acid insoluble, silica, calcium and iron contents of the pulp by 56, 31, 82, 84 and 60% respectively. The addition of acid, increase in kappa factor in $C_D$ stage and combination of both were effective in removing silica in the pulp. Treatment of final bleached pulp with $SO_2$ water removes silica to a great extent and improves optical properties of the pulp as compared to $H_2SO_4$ or PAA. Pretreatment of the pulp with acid and modification in the bleaching process can reduce silica substantially and improve the quality of rayon grade bamboo pulp.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.4
• /
• pp.79-82
• /
• 2008

A method is described for ideally reconstructing the profile from a surface profiling measurement containing a reasonable amount of null measurement data. The proposed method can conjecture lost information and rectify irregular data that result due to bad measuring environments, signal transmission noise, or instrument-induced errors, The method adopts the concept of computer graphics and consists of several processing steps. First, a search for valid data in the neighborhood of the null data is performed. The valid data are then grouped and their contours are extracted. By analyzing these contours, a bounding box can be obtained and the general distribution of the entire area encompassing the valid and null data is determined Finally, an ideal surface model is overlaid onto the measurement results based on the bounding box, generating a complete reconstruction of the calculations, A surface-profiling task on a liquid crystal display photo spacer is used to verify the proposed method. The results are compared to those obtained through the use of a scanning electron microscope to demonstrate the accuracy of the proposed method.

• Preventive Nutrition and Food Science
• /
• v.7 no.1
• /
• pp.18-21
• /
• 2002

The extract of Ginkgo biloba leaves was measured for inhibitory activity against xanthine oxidase. Aceton extract of G. biloba leaves showed strong inhibitory activity. Inhibitory activities of the fractionated extract were in the order of water > ethyl acetate fractions. Two fractions exhibiting strong inhibitory activities ware further purified via repeated silica gel, Amberlite IRN-78, Polyclar AT, and Sephadex LH-20 column chromatographies. Active components were isolated and identified through $^1$H-NMR and $^{13}$ C-NMR. The compounds were characterized as kaempferol 3-Ο-$\alpha$-(6$^{"′}$-p-coumaroylglucosyl-$\beta$-1,4-rhamnoside), and quercertin 3-Ο-$\alpha$-(6$^{′}$-p-coumaroylglucosyl-$\beta$-1,4-rhamnoside).

• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.3
• /
• pp.299-304
• /
• 2014

Objective : The present study was intended to develop a design ideation and evaluation process for the development of ecology-, ergonomics-, and economy-friendly ($E^3$-friendly) products. Background : Due to increasing social and legal requirements on global sustainability, manufacturing companies have made more efforts ever than before for the development of eco-friendly products. However, most eco-friendly products are often criticized due to lacking ergonomic and/or economic considerations. Method : An $E^3$-friendly product development process consisting of (1) survey of eco-friendly products, (2) characterization of eco-friendly products, (3) design ideation for $E^3$-friendly product, and (4) design idea evaluation for $E^3$-friendliness was established and applied to the development of a novel product which supports drinking of daily recommended amount of water. Results : Fifty-five design characteristics were identified by a survey of forty eco-friendly products and incorporated into the proposed ideation and evaluation process. New ideas and design changes were developed effectively using the proposed development process for a novel $E^3$-friendly bottle for support of water drinking. Conclusion : The proposed process was found effective for the development of eco-friendly design ideas and improvements. Application : The proposed system would be of use to develop better design ideas having market competitiveness.

• Journal of Korea Game Society
• /
• v.10 no.3
• /
• pp.3-13
• /
• 2010

This study suggests about industrial-educational cooperation model through a case study by practical training by industrial-educational cooperation. Practical training of game development process is organized as industrial-educational cooperation pipe-line to represent whole process model, and step-cases about this are described. The purpose of this study is for learners to experience practical industry development process in a direct or indirect way. And above all, educators role in each stages of development is also important. This study would be used as a reference data about practical training and studies related with industrial-educational cooperation.

• Industrial Engineering and Management Systems
• /
• v.13 no.2
• /
• pp.203-209
• /
• 2014

This research designed and implemented a supply chain risk management platform and applied it to a case study of reduced-fat Lanna pork sausage as a new product development project. The proposed framework has three stages: risk identification, risk assessment, and risk mitigation. Seventeen risk agents with 17 risk events were identified based on SWOT analysis and the Porter Five Forces concept through the process of planning, sourcing, making and delivering, partially captured from the supply chain operations reference model in the first stage. In the second stage, an house of risk (HOR) framework was applied to present the impacts of each risk agent. In the third stage, eight risk agents with high impact were selected to design 21 preventive actions. Finally, three preventive actions with the highest effectiveness to difficulty ratio scores-'sales evaluation of familiar products', 'increasing distribution channels and promotions to improve sales', and 'work flow improvement for work safety'-were then recommended for this new product development.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.2821-2830
• /
• 2014

This study was carried out to define gazelle industry through preceded research for gazelle firm & gazelle region, in order to discover high-growth industries. Gazelle industry is 'employees per company is more than ten people, and over the past five years, within top 10% by Birch employment growth index'. According to the definition of gazelle industry, Chungnam gazelle 105 industries were chosen. Then, analyzed whether Chungnam gazelle industries has competitiveness compared with nation and each city of Chungnam. In addition, typology to industrial development stage was devised by developing of business scale quotient(BQ) and industrial growth rate(IG). And development strategies of Chungnam gazelle industries was proposed case by industrial development stage.

• Journal of Korean Institute of Industrial Engineers
• /
• v.34 no.1
• /
• pp.66-78
• /
• 2008

In the past, Manufacturers used to determine the quality of products, but the trend of today's market becomesmore into customer-driven. As a result, demands from customers are becoming more diverse and complicated,and most companies are obligated to meet their needs. As one of the effort to achieve their satisfaction,companies are now emphasizing activities to find out what customers specifically want and extract voice ofcustomer(VOC). This study attempts to develop an ergonomic product development process as a method tomaximally reflect the VOC. In order to meet this goal, ergonomic design guidelines, which are possible to beclassified according that user's human characteristics, will be recommended. Even now, there are numerousdesign guidelines already existing in the ergonomics literature. However, it is not realistically feasible to reviewall of those guidelines, and some of them are even conflicting with each other. Therefore, in this paper, theproduct development process, which prioritizes the human characteristics that reflect customer needs and appliesthe design guidelines that meet the most important ones, will be suggested. Finally, the research was described toshow the validity of the product development process through an example of a mobile phone development case.

• Journal of the Korean Society of Industry Convergence
• /
• v.13 no.3
• /
• pp.183-189
• /
• 2010

The purpose of this study was to examine the Industrial High Schools Technical Subjects teachers' perceptions and attitudes toward sustainable development(SD). The instrument consisted of totally 12 items. The subjects of this study were 98 Industrial High Schools Technical Subjects teachers. The period of survey is from June 23 to July 15 of 2010. The questionnaire included items asking whether they heard about terms such as sustainability or sustainable development, the source of information on SD, the level of understanding or the urgent task 2 for SD in Korea. Result of survey is following. First, Teacher thought that urgent task for SD is conservation of natural environment. Second, Most of the teacher consider the concept SD as 'pursuing the balance between environmental protection and economic development, and some of the teachers recognized the concept of SD in the paradigm of continuous economic development. Third, half of teachers have not heard terminology of SD .and 80% of them have not conducted ESD. Fourth, a few of teachers replied that obstacle of ESD is shortage of teacher's professionalism.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.232-232
• /
• 2005