• Journal of Mechanical Science and Technology
• /
• v.20 no.10
• /
• pp.1614-1625
• /
• 2006

This paper presents the kinematics and workspace optimization of the two different 2-DOF (Degrees-of-Freedom) planar parallel mechanisms: one (called 2-RPR mechanism) with translational actuators and the other (called 2-RRR mechanism) with rotational ones. First of all, the inverse kinematics and Jacobian matrix for each mechanism are derived analytically. Then, the workspace including the output-space and the joint-space is systematically analyzed in order to determine the geometric parameters and the operating range of the actuators. Finally, the kinematic optimization of the mechanisms is performed in consideration of their dexterity and rigidity. It is expected that the optimization results can be effectively used as a basic material for the applications of the presented mechanisms to more industrial fields.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.12 s.255
• /
• pp.1564-1572
• /
• 2006

This paper presents the kinematics and workspace optimization of the two different 2-DOF (Degrees-of-Freedom) planar parallel mechanisms: one (called 2-RPR mechanism) with translational actuators and the other (called 2-RRR mechanism) with rotational ones. First of all, the inverse kinematics and Jacobian matrix of each mechanism are derived analytically. Then, the workspace including the output-space and the joint-space is systematically analyzed in order to determine the geometric parameters and the operating range of the actuators. .Finally, the kinematic optimization of the mechanisms is performed with regards to their dexterity, stiffness and space utilization. It is expected that the optimization results can be effectively used as a basic material for the applications of the presented mechanisms to more industrial fields.

• Journal of Information Processing Systems
• /
• v.14 no.4
• /
• pp.1033-1048
• /
• 2018

This paper proposes an integrated lighting enabler system (ILES) based on standard machine-to-machine (M2M) platforms. This system provides common services of end-to-and M2M communication for smart lighting system. It is divided into two sub-systems, namely end-device system and server system. On the server side, the M2M platform OpenMTC is used to receive data from the sensors and send response for activating actuators. At the end-device system, a programmable smart lighting device is connected to the actuators and sensors for communicating their data to the server. Some experiments have been done to prove the system concept. The experiment results show that the proposed integrated lighting enabler system is effective to reduce the power consumption by 25.22% (in average). The proving of significance effect in reducing power consumption is measured by the Wilcoxon method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.11
• /
• pp.1109-1117
• /
• 2017

In this work, a new control module and communication system associated with DSP are proposed to overcome the limitations of the contemporary prevailing PLC-based industrial equipment controller, and the performance of the proposed system was experimentally verified. In the light of this issue, a communication conversion scheme from RS-485 to Modbus, the dominant communication protocol used by PLC, was developed and shown to yield enhanced compatibility between devices. The proposed system allows for ~50％ cost reduction as well as downsizing of the industrial controllers. Furthermore, the design includes 24 V general digital I/O pins, which facilitate partial expansion of inputs and outputs. With Modbus communication implemented in DSP with the RS-485 interface, multi-to-multi communication may also be achieved.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.8
• /
• pp.3224-3242
• /
• 2020

Internet of Things (IoT) networks composed of a large number of sensors and actuators generate a huge volume of data and control commands, which should be enforced by strong data reliability. The end-to-end data reliability of IoT networks is an essential industrial enabler. Blockchain technology can provide strong data reliability and integrity within IoT networks. We designed a lightweight end-to-end blockchain network that applies to common IoT applications. Its enhanced modular architecture and lightweight consensus mechanism guarantee its practical applicability for general IoT applications. In addition, the proposed blockchain network is highly software compatible because it adopts the Hyperledger development environment. Directly embedding the proposed blockchain middleware platform in small computing devices proves its practicability.

• Journal of Mechanical Science and Technology
• /
• v.20 no.3
• /
• pp.297-309
• /
• 2006

This paper deals with a novel structure for single-cell characterization which makes use of bimorph micro thermal actuators combined with electrical sensor device and integrated microfluidic channel. The goal for this device is to capture and characterize individual biocell. Quantitative and qualitative characteristics of bimorph thermal actuator were analyzed with finite element analysis methods. Furthermore, optimization for the dimension of cantilevers and integrated parallel probe systems with microfluidic channels is able to be realized through the virtual simulation for actuation and the practical fabrication of prototype of probes. The experimental value of probe deflection was in accordance with the simulated one.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.617-622
• /
• 2018

In industries such as automobiles and semiconductors, a lot of components are produced using PLCs based on an automatic production system. Therefore, an educational platform is needed to provide training in the use of PLCs in the industrial sites. Conventional educational systems, in which PLCs are employed to control sensors and actuators, have been continuously developed. However, these systems present their circuits only in 2D on the screen, which makes it difficult to understand them during the learning process. To overcome these disadvantages, we propose an educational V-Factory system capable of providing PLC training using virtual reality. In addition, thousands of sensors and actuators can be controlled by the V-Factory system through the proposed virtual I/O driver. The motion of the automatic production system can be visualized using virtual reality.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.813-816
• /
• 1991

Direct-drive SCARA-type industrial robots are increasingly used in the assembly process of small mechanical parts as well as electronic components, which uses direct-drive (DD) motors instead of reduction gear-type conventional motors for the actuators of manipulator arms. There are many advantages in using DD motors for robots, such as no backlash, low friction, high mechanical stiffness capability for fast and precise arm control, and high repeatability of positioning. However, there exist a number of difficulties which must be overcome to ensure proper construction and operation; increasing effects of load veriation and nonlinear and coupling dynamics, severe vibration caused by resonance of the manipulator components and low mechanical damping, etc. In order to handle these difficulties, lots of efforts have been made such as reduction of the arm inertia and elimination of the resonance, Performance evaluation of a recently developed, domestic DD robot shows that it works excellently compared with conventional robots. It, however, requires proved reliability and price competitiveness against its foreign counterparts.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.11
• /
• pp.950-955
• /
• 2005

A automatic component inserting system for industrial PCB is developed in this paper. This system has not been developed in Korea. Most domestic companies produce PCB manually. This process requires highly-skilled staff. Therefor, we developed a PCB inserting system for automation of the process and improved productivity. There are low parts in this system; press, table, tool change and control part. A hybrid press cylinder with pneumatic and hydraulic is used in the press part. The table part consists of pneumatic actuators, stepping motors and ball-screw mechanism. In the tool change part, upper tools can be exchanged automatically for the inserting of various components. The control part consists of motor drivers, PLCs and power supply.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.4
• /
• pp.54-63
• /
• 1993

This paper presents the dynamic modeling and control methodology to arrest structural deflections of industrial robotic manipulators featuring elastic members retrofitted with surface bonded pizoelectric actuators and sensors. The cynamic modeling is accomplished by employing a variational theorem, prior to developing a finite element formulation. This finite element formulation accounts for both original robot member elements and also bonded piezoelectric material elements. The governing equation of motion is then modified by condensing the electric potential vectors and subsequently two different negative velocity feedback controllers are established; a constant-gain feedback controller and a constant- amplitude feedback controller. By adopting a Model P50 articulating industrial robot manufactured by Gerneral Electric Company, conputer simulations are underlaken in order to demonstrate superior performance characteristics to be accrued from this proposed methodology such as smaller deflections at the end-effector.