• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.195-198
• /
• 1999

For the thixoforming process beside an existing solidus-liquidus interval, the reheating conditions to obtain the globular microstructure are very important. It relies on the control of globular microstructure of semi-solid alloys that contain non-dendritic particles. To obtain the globular microstructure in cross section of billet, the optimal design of the induction coil is necessary. Therefore, in this paper the optimal coil design to minimize electromagnetic end effect will be proposed. The results of coil design were also applied to the reheating process to obtain a fine globular microstructure. Finally, reheating data base of aluminum alloys for thixoforming and FEM model for induction heating based on the optimal coil design have been proposed.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.57-60
• /
• 2008

A design criterion of grounding systems is commonly based on low frequency resistance in Korea. When lightning surges which have high frequency components are injected into the grounding system, the grounding impedance is greatly different from the static grounding resistance. This paper presents the grounding adimittance and phase on the frequency range from 100 [Hz] to 15 [MHz] using water tank simulating the grounding system in different water resistivities. As a result, capacitive effect is dominant over the frequency of 100 [kHz] at the water resistivity of 1,000 [$\Omega$ m]. On the other hand, the inductive characteristics appear at the low water resistivity. Consequently, dependence of grounding impedances on the frequency of injected current is strongly related to resistivity.

• 한국멀티미디어학회논문지
• /
• 제21권9호
• /
• pp.1099-1109
• /
• 2018

Most of the automotive electronic systems are equipped with control software. ISO 26262 standard has been published to prevent unreasonable risk due to E/E system malfunction. And many automotive companies apply ISO 26262 for safe series product. In ISO 26262 standard, the product quality improves through deductive and inductive safety analysis in all processes including system and software development phase. However, there are few studies on software safety analysis than systems. In the paper, we study the software FMEA(Failure Mode Effect Analysis) technique for product quality of vehicular embedded software. And we propose an effective guideline of software FMEA as EPB industrial practice.

• 한국경영과학회지
• /
• 제17권2호
• /
• pp.145-162
• /
• 1992

This paper proposes two design principles for expert systems to solve a stock market timing (SMART) problems : machine knowledge and fuzzy post-adjustment, Machine knowledge is derived from past SMART instances by using an inductive learning algorithm. A knowledge-based solution, which can be regarded as a prior SMART strategy, is then obtained on the basis of the machine knowledge. Fuzzy post-adjustment (FPA) refers to a Bayesian-like reasoning, allowing the prior SMART strategy to be revised by the fuzzy evaluation of environmental factors that might effect the SMART strategy. A prototype system, named K-SISS2 (Knowledge-based Stock Investment Support System 2), was implemented using the two design principles and tested for solving the SMART problem that is aimed at choosing the best time to buy or sell stocks. The prototype system worked very well in an actual stock investment situation, illustrating basic ideas and techniques underlying the suggested design principles.

• Molecules and Cells
• /
• 제39권10호
• /
• pp.715-721
• /
• 2016

Plants have become physiologically adapted to a seasonally shifting environment by evolving many sensory mechanisms. Seasonal flowering is a good example of adaptation to local environmental demands and is crucial for maximizing reproductive fitness. Photoperiod and temperature are major environmental stimuli that control flowering through expression of a floral inducer, FLOWERING LOCUS T (FT) protein. Recent discoveries made using the model plant Arabidopsis thaliana have shown that the functions of photoreceptors are essential for the timing of FT gene induction, via modulation of the transcriptional activator CONSTANS (CO) at transcriptional and post-translational levels in response to seasonal variations. The activation of FT transcription by the fine-tuned CO protein enables plants to switch from vegetative growth to flowering under inductive environmental conditions. The present review briefly summarizes our current understanding of the molecular mechanisms by which the information of environmental stimuli is sensed and transduced to trigger FT induction in leaves.

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.546-550
• /
• 2014

Relative reactivity of various carbonyl and acid derivatives in MPV-type (Meerwein-Ponndorf-Verley) reduction with an DIBAL(F) model has been studied via DFT and MP2 methods. Free energies of initial adduct formation (-Gadd) of DIBAL(F) model and carbonyls are in the order of amide < ester < aldehyde < ketone < acid chloride; in the alan-amide adduct, the developed positive charge at carbonyl carbon is expected to be stabilized by amide resonance, but in the acid chloride adduct it is destabilized by inductive effect of chloride. However the TS barrier energies (${\Delta}G_{TS}$) for the MPV-type hydride reduction of the carbonyl adducts are in the order of aldehyde < ketone < acid chloride << ester < amide; presumably decreasing order of electrophilicity of carbonyl carbon at adducts, which is well correlated with experimental data. It is noted that the relative reactivity of carbonyl derivatives in MPV-type reduction with DIBAL(X) is not governed by the alan-adduct formation energies, but follows the order of electrophilicity of carbonyl carbon of transition states.

• Bulletin of the Korean Chemical Society
• /
• 제34권4호
• /
• pp.1096-1100
• /
• 2013

The kinetic studies on the reactions of O-methyl (1), O-propyl (3) and O-isopropyl (4) phenyl phosphonochloridothioates with substituted anilines and deuterated anilines have been carried out in acetonitrile at $55.0^{\circ}C$. A concerted $S_N2$ mechanism is proposed for the anilinolyses of 1, 3 and 4. The anilinolysis rates of the phosphonochloridothioates are predominantly dependent upon the steric effects over the inductive effects of the two ligands. The deuterium kinetic isotope effects (DKIEs; $k_H/k_D$) are primary normal with 1 and 3, while secondary inverse with 4. Primary normal and secondary inverse DKIEs are rationalized by frontside and backside nucleophilic attack transition state, respectively. The DKIEs of the phosphonochloridothioates do not have any consistent correlations with the two ligands.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.367-369
• /
• 1997

In signal system such as MAGLEV, the transmission channel that has wireless transmission line between on-board and ground-site is susceptible to have interference and may introduce data error on transmission. In this paper, by applying inductive wireless and FSK(frequency shift keying) modulation using widely in railway signal system, we intend to analyze the data transmission characteristics. In this case, noise may have effect on transmission channel. Therefore transmission channel should be lessened the data error from random noise. Considering the transmission medium, the objective of this study is to analyze the transmission characteristics between on-board and ground-site and to obtain transmission performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.436-439
• /
• 1999

This paper present a study on the interference levels on the communication lines, which are parallel to the electrified rails. The interference study is carried out using a circuit model approach. First, the self and shunt impedances of all the conductors in the rail system and the mutual impedances between different conductors are computed. Several different scenarios are analyzed, including the load condition and a few fault conditions with different fault locations. The induced potentials on the communication cables are computed. The effect of the buried ground wires is also analyzed by comparing the results with and without the presence of the ground wires. The results presented in the paper can be used as a reference for estimating interference levels in similar rail systems.

• Corrosion Science and Technology
• /
• 제15권1호
• /
• pp.13-17
• /
• 2016

The aim of this study was to evaluate the use of iron-nickel oxide ($Fe_2O_3$.NiO) nanopowder (FeNi) as an anti-corrosion pigment for a different application. The corrosion protection ability and the mechanism involved was determined using aqueous solution of FeNi prepared in a corrosive solution containing 3.5 wt.% NaCl. Anti-corrosion abilities of aqueous solution were determined using electrochemical impedance spectroscopy (EIS) on line pipe steel (API 5L X-80). The protection mechanism involved the adsorption of metallic cations on the steel surface forming a protective film. Analysis of EIS spectra revealed that corrosion inhibition occurred at low concentration, whereas higher concentration of aqueous solution produced induction behavior.