• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.872-873
• /
• 2007

This paper proposes a calculating method of resistance and inductance of end ring of squirrel cage induction motor for 2D finite element analysis. The squirrel cage of induction motor consists of bars and end rings. The resistance and inductance of end ring have an effect on the result of the finite element calaculation. If the end ring were excluded from the analysis, the good result could not be obtained. Therefore, we first simulate an axisymmetric magnetodynamic analysis for the end ring, and then calculate the interbar resistance and the end ring inductance. The calculated values are put into the external circuit of 2D finite element model of the induction motor. The proposed method is verified by comparing the numerical results with the experimental ones.

• 동력기계공학회지
• /
• 제16권5호
• /
• pp.63-69
• /
• 2012

This paper presents an analysis on the induction heating of ring flange for wind farm. Ring flange is used for the connection of poles when building a column of wind power plant. Heat treatment of ring flange with the diameter of ${\O}1,000mm$ has been considered. For analysis on the induction heating, FEA is used. Firstly, electromagnetic filed analysis was performed to get the induction current distribution on the steel, After that, heat transfer analysis was performed using the magnetic filed analysis results. for more precise analysis, some measurement for permeability has been performed and the measurement data was used during the analysis. From the analysis, we get the temperature distribution on the ring flange.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권2호
• /
• pp.49-55
• /
• 1999

This paper proposes an efficient 2D Finite Element Method(FEM) taking into account the end-ring of three phase squirrel-cage induction motors. The parameters of the squirrel-cage induction motor such as conductivity of secondary conductor have an effect on the characteristics of a motor. Especially, if the characteristic analysis is done without considering the end-ring, the good results can not be obtained. Therefore, we calculated a new resistivity of the secondary conductor including the end-ring's resistance to apply the 2D FEM. Then, the performances of the motors are analyzed by using the new resistivity of secondary conductor which contains the end-ring resistivity. The validity of the proposed method is verified by comparing the numerical results with experimental ones.

• 전기학회논문지
• /
• 제67권7호
• /
• pp.981-986
• /
• 2018

AC(alternating current) CB(circuit breaker) at the fault occurred in the existing AC distribution system is limiting the fault current through zero cross-point. However, DC(direct current) CB does not have zero cross-point. Therefore, arc occurred by on-off operation of DC CB is very huge. Nowadays, many research team are studying the way to decrease breaking time, which is one of the essential conditions in DC CB. We suggested novel arc-induction type DC CB in this paper. The proposed arc-induction type DC CB is composed of the mechanical Arc ring and DC CB. We confirmed the operation of arc-induction type DC CB through the HFSS(High Frequency Structure Simulator) 3D simulation program and performed the experiment for operation characteristics. Results showed that arcing time of the arc-induction type DC CB by using induction ring was faster than existing mechanical DC CB. On the transient system, we confirmed stable operation characteristics of the arc-induction type DC CB through the simulation and experimental results. We expect that the proposed arc-induction type DC CB technology is will go to stay ahead of the existing DC CB technology.

• Journal of Power Electronics
• /
• 제11권2호
• /
• pp.163-172
• /
• 2011

Oxidation models of a rotor bar and end ring segment in an induction motor are presented to simulate the behavior of an induction machine working with oxidized rotor parts which are modeled as rotor faults in progress. The leakage inductance and resistance of the rotor parts arc different from normal values because of the oxidation process. The impedance variations modify the current density and magnetic flux which pass through the oxidized parts. Consequently, it causes the rotor asymmetry which induces abnormal harmonics in the stator current spectra of the faulty machine. The leakage inductances of the oxidation models are derived by the Ampere's law. Using the proposed oxidation models, the rotor bar and end ring faults in progress can be modeled and simulated with the motor current signature analysis (MCSA). In addition, the oxidation process of the rotor bar and end ring segment can motivate the rotor asymmetry, which is induced by electromagnetic imbalances, and it is one of the major motor faults. Results of simulations and experiments are compared to each other to verify the accuracy of the proposed models. Experiments are achieved using 3.7 kW, 3-phase, and squirrel cage induction motors with a motor drive inverter.

• 한국산학기술학회논문지
• /
• 제20권7호
• /
• pp.347-352
• /
• 2019

본 연구는 소형 유도전동기 회전자를 생산공장에서 금형주조(die casting)로 제작 시 발생하는 cast 부 품질문제를 개선하기 위하여 수행되었다. 1차 연구결과와 현장 적용성을 고려한 수많은 parametric study를 통하여 새로운 rotor core cast model을 제안하였으며, 그 제안된 model에 대한 유효성을 평가, 검증하기 위하여 주조해석 전용프로그램을 사용한 수치해석과 실제품에 대한 현장실험을 통하여 다음과 같은 결론을 얻었다. 첫째, 유도전동기 회전자의 새로운 cast model에 대한 충진해석을 수행한 결과 용탕은 하부 end ring 부를 먼저 충진하고 이동하여 상부 end ring, core slot 부분을 충진하고 최종적으로 core slot 부분에서 충진이 완료된다. 둘째, 새롭게 제안된 rotor core cast model에 대한 용탕의 유동 양상을 보면 하부 end ring 부에 용탕의 유동에 의한 와류가 적게 발생하였으며, 현장실험 결과 하부 end ring 부 단면에서 소량의 작은 결함만이 발견되었다. 셋째, 유도전동기 회전자 제작 시 rotor core cast 형상 변경을 통하여 end ring 부 결함 발생 면적이 약 70 % 감소한 양호한 품질의 회전자를 생산할 수 있다.

• 한국산학기술학회논문지
• /
• 제19권10호
• /
• pp.115-120
• /
• 2018

본 연구에서는 산업현장에서 널리 사용되고 있는 소형 유도전동기의 회전자를 생산공장에서 금형주조(die casting)로 제작 시 rotor core cast의 품질을 평가하기 위하여 주조해석 전용 프로그램을 사용하여 수치해석을 수행하였으며, 그 결과를 실험결과와 비교하여 다음과 같은 결론을 얻을 수 있었다. 첫째, 유도전동기 회전자의 고압 금형주조 시 고속으로 사출된 알루미늄 용탕의 충진 양상을 시간 경과에 따라 평가한 결과, 용탕은 하부 end ring 부를 먼저 충진하고 수평으로 이동하여 상부 end ring, core slot 부분을 충진하여 최종적으로 core slot 부분에서 충진이 완료된다. 둘째, mould 내부에서의 용탕의 충진 양상을 보면 상부 end ring, core slot 부분보다 하부 end ring 부분에서 용탕의 유동에 의한 와류가 발생하여 결함 발생이 예측되었으며, 현장 실험결과 하부 end ring 부 단면에서 작고 큰 다수의 결함이 발견되었다. 셋째, 금형주조 작업으로 양호한 품질의 회전자를 제작하기 위해서는 cast 형상 변경이나 작업조건 등 추가적인 연구가 필요하며 이에 대해서는 추후에 보고할 예정이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.158-160
• /
• 1998

This paper proposed the 2-D Finite Element analysis method taking into end-ring of squirrel cage induction motor. Secondary conductor resistance can be simply replaced new one considering end-ring resistance. In the case of 2-D FEM, the end-ring resistance is hard to condsider. And the results without considering end-ring resistance have an error. To verify the proposed method we compared the analysis results and test ones.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 학술대회 논문집 전문대학교육위원
• /
• pp.30-32
• /
• 2001

Thomson's jumping ring was first exhibited by Elihu Thomson in 1887 and modified to include the floating variation by John A. Fleming in 1890. This vivid demonstration of electromagnetic induction is still used in physics classrooms to illustrate Faraday's and Lenz's laws and is the basis for linear actuators for sorvo-mechanical purpose as well as induction heating and rail guns. The jumping ring apparatus of the type described in this study is used to demonstrate and educate the effects of electromagnetic induction. To verify control algorithm, a sensor system and a data control/measurement system is required. The sensor system consist of photo-interrupted and encode circuit which is designed to take voltage according to the position of ring.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1007-1009
• /
• 2004

This paper describes the design and the performance analysis of high speed induction motor considering end-ring using F.E.M.. To investigate the flux distribution, the induced rotor current, the designed high speed induction motor is analyzed by 3-D F.E.M.. Also, to identify the design specification, the performance characteristic is analyzed and estimated into the torque, the current and the output power at the static and the transient state.