• 제목/요약/키워드: Induction heating

검색결과 576건 처리시간 0.028초

구강스캐너와 급속 지르코니아 소결을 이용한 당일 풀지르코니아 보철수복 (Digital workflow of single visit full contour monolithic zirconia restoration with CEREC Omnicam intraoral scanner and fast zirconia sintering process)

  • 이수영
    • 대한심미치과학회지
    • /
    • 제25권2호
    • /
    • pp.79-87
    • /
    • 2016
  • 당일수복 보철물 제작을 위해 디지털 프로세스 사용은 필수적이다. 이러한 디지털 프로세스는 구강스캔, 컴퓨터를 이용한 보철물을 디자인 과정(CAD)과 보철물을 가공하는 과정(CAM)을 포함한다. 지르코니아의 굴곡강도는 900Mpa로 리튬디실리케이트의 400MPa보다 더 단단하지만, 리튬디실리케이트를 이용한 보철물 기공시간이 지르코니아와 비교하여 더 짧기에 당일수복 보철물 제작시 리튬디실리케이트 사용이 선호되었다. 하지만, TZI C 와 LUXEN Enamel 와 같은 새로운 소재의 지르코니아가 출시되고, 새로운 소결방식이 개발되어 지르코니아 기공시간을 단축시킬수 있게 되었고, 높은 투명도의 풀지르코니아 크라운을 짧은 시간 안에 제작할 수 있게 되었다. 이러한 발전은 당일 풀지르코니아 보철수복을 현실로 이끌고 있다.

Transcranial Doppler를 이용(利用)한 태음인 중풍환자의 혈류속도(血流速度)와 혈관(血管) 반응성(反應性)에 대한 임상적(臨床的) 고찰(考察) (Clinical study of blood flow and vascular reaction in Taeumin CVA patients using Transcranial Doppler)

  • 임종필;배나영;한경수;안택원
    • 혜화의학회지
    • /
    • 제15권2호
    • /
    • pp.263-272
    • /
    • 2006
  • Purpose Brain vessles have autoregulation function, so even when perfusion pressure drops, cerebral blood flow remain stable by vasodilation. Latest research on this reserve of cerebral vessels is being done using TCD, which measures the reserve of the vessels. We did a research comparing cerebral vessel and peripheral vessel reserve between Taeumin, who are more likely to suffer CVA, and the normal. We observed blood flow of Internal carotid artery siphon and radial indicis artery of the two group with TCD. Method We picked 20 people out of patients diagnosed as cerebral infarction at Cheon-An Oriental hospital of Daejeon University. They were diagnosed as Taeumin with QSCCII questionnaire and constitutional differentiation. Using TCD, we measured highest blood flow rate, mean blood flow and asymmetric counting blood flow of Internal carotid artery siphon and radial indicis artery at rest. And then we measured again after stimulating cerebral vessels, by triggering hypercapnia by self apnea and peripheral vessels by palm heating. Result At rest, mean blood flow rate of Internal carotid artery siphon showed significant decrease compared to control group. Blood flow rate of Internal carotid artery siphon after hypercapnia showed significant decline in highest blood flow rate and mean blood flow compared to control group. Cerebral vessel reaction after the hypercapnia induction showed great change in experiment group than the control group. Peripheral vessel reaction after palm heating showed significant decline in experiment group compared to control group. Conclusion In conclusion, measuring the alteration of blood flow used in diagnosing cerebral infarction, is more sensitive when vessel stimulation is done. Non-invasive TCD is effective especially in case of Taeumin who are more likely to suffer vascular disorder than others.

  • PDF

PVT법을 이용한 (011)면으로 성장된 AlN 단결정 성장에 관한 연구 (A study on growing of bulk AlN single crystals grown having a (011) growth face of by PVT method)

  • 강승민
    • 한국결정성장학회지
    • /
    • 제25권1호
    • /
    • pp.32-34
    • /
    • 2015
  • PVT(Physical vapor transport)법으로 벌크형 종자 결정을 이용하여 AlN 단결정을 성장 시켰다. 성장과정은 고주파 유도 가열 코일을 이용한 방법으로 진행되었다. 카본 도가니의 하단에 원료 분말을 장입하고 종자 결정은 도가니의 상부에 부착하였다. 성장 조건으로 온도는 $2000{\sim}2100^{\circ}C$ 사이에서 이루어 졌으며 챔버내 압은 $1{\times}10^{-1}{\sim}200$ Torr로 유지하였다. 또한 가열 위치를 결정짓는 hot-zone 조절이 성장의 시간이 진행됨에 따라 수정되었다. 이러한 조건하에 약 600시간 성장시킨 결과로 장축 직경 17 mm 두께 7 mm의 AlN 단결정이 얻어졌으며, Laue X-Ray 장치을 이용하여 성장된 결정의 방향을 조사한 결과 R방향[011]으로 성장 되었음을 알 수 있었다.

Synthesis and Luminescence Properties of Sr/SmSi5N8:Eu2+ Phosphor for White Light-Emitting-Diode

  • Luong, Van Duong;Lee, Hong-Ro
    • 한국표면공학회지
    • /
    • 제47권4호
    • /
    • pp.192-197
    • /
    • 2014
  • Red-emitting nitride phosphors recently attracted considerable attention because of their high thermal stability and high color rendering index properties. For excellent phosphor of white light-emitting-diode, ternary nitride phosphor of $Sr/SmSi_5N_8:Eu^{2+}$ with different $Eu^{2+}$ ion concentration were synthesized by solid state reaction method. In this work, red-emitting nitride $Sr/SmSi_5N_8:Eu^{2+}$ phosphor was successfully synthesized by using multi-step high frequency induction heat treatment. The effects of molar ratio of component and experimental conditions on luminescence property of prepared phosphors have been investigated. The structure and luminescence properties of prepared $Sr/SmSi_5N_8:Eu^{2+}$ phosphors were investigated by XRD and photoluminescence spectroscopy. The excitation spectra of $Sr/SmSi_5N_8:Eu^{2+}$ phosphors indicated broad excitation wavelength range of 300 - 550 nm, namely from UV to visible area with distinct enhanced emission peaks. With an increase of $Eu^{2+}$ ion concentration, the peak position of emission in spectra was red-shifted from 613 to 671 nm. After via multi-step heat treatment, prepared phosphor showed excellent luminescence properties, such as high emission intensity and low thermal quenching, better than commercial phosphor of $Y_3Al_5O_{12}:Ce^{3+}$. Using $Eu_2O_3$ as a raw material for $Eu^{2+}$ dopant with nitrogen gas flowing instead of using commercial EuN chemical for $Sr/SmSi_5N_8:Eu^{2+}$ synthesis is one of characteristic of this work.

Half-Bridge 직렬 공진형 인버터를 단위인버터로 한 시분할방식 고주파 인버터의 특성해석에 관한 연구 (A Study on Characteristics Analysis of Time Sharing Type High Frequency Inverter Consisting of Three Unit Half-Bridge Serial Resonant Inverter)

  • 조규판;원재선;서철식;배영호;김동희;노채균
    • 조명전기설비학회논문지
    • /
    • 제15권1호
    • /
    • pp.90-97
    • /
    • 2001
  • 본 논문은 고주파 유도가열용 전원에 사용되는 Half-Bridge 직렬 공진형 인버터를 단위인버터로 한 고주파 인버터 회로를 제시하였다. 제안한 인버터의 구동신호 제어기법으로는 아날로그와 디지털 통신에서 신호전송용으로 널리 사용되는 TDM(Time Division Multiplexing) 방식을 응용한 시분할 구동법을 사용하였다. 회로의 해석은 정규화 파라메타를 도입하여 범용성 있게 기술하였고, 인버터 특성은 스위칭 주파수와 제 파라메타에 따라 특성평가를 행하였다. 또한, 이론해석에서 얻은 특성값을 기초로 한 회로 설계 기법의 일 예도 제시하였다. 범용 시뮬레이션 툴인 Pspice를 통해 이론해석의 타당성을 검증하였으며, 향후 유도가열 응용, DC-DC 컨버터 등의 전원 시스템에 응용 가능성을 보여주고 있다.

  • PDF

W-1.5 ZrO2 복합재료 합성과 급속소결 (Synthesis and Rapid Consolidation of W-1.5 ZrO2 Composite)

  • 김성은;손인진
    • 한국재료학회지
    • /
    • 제28권11호
    • /
    • pp.653-658
    • /
    • 2018
  • $ZrO_2$ is a candidate material for hip and knee joint replacements because of its excellent combination of biocompatibility, corrosion resistance and low density. However, the drawback of pure $ZrO_2$ is a low fracture toughness at room temperature. One of the most obvious tactics to cope with this problem is to fabricate a nanostructured composite material. Nanomaterials can be produced with improved mechanical properties(hardness and fracture toughness). The high-frequency induction heated sintering method takes advantage of simultaneously applying induced current and mechanical pressure during sintering. As a result, nanostructured materials can be achieved within very short time. In this study, W and $ZrO_2$ nanopowders are mechanochemically synthesized from $WO_3$ and Zr powders according to the reaction($WO_3+3/2Zr{\rightarrow}W+3/2ZrO_2$). The milled powders are then sintered using high-frequency induction heating within two minutes under the uniaxial pressure of 80MPa. The average fracture toughness and hardness of the nanostructured W-3/2 $ZrO_2$ composite sintered at $1300^{\circ}C$ are $540kg/mm^2$ and $5MPa{\cdot}m^{1/2}$, respectively. The fracture toughness of the composite is higher than that of monolithic $ZrO_2$. The phase and microstructure of the composite is also investigated by XRD and FE-SEM.

고주파 유도 가열에 의한 급속 나노구조 MgTiO3 화합물 합성 및 소결 (Rapid Synthesis and Sintering of Nanostructured MgTiO3 Compound by High-Frequency Induction Heating)

  • 강현수;도정만;윤진국;박방주;손인진
    • 대한금속재료학회지
    • /
    • 제50권12호
    • /
    • pp.891-896
    • /
    • 2012
  • Nanopowders of MgO and $TiO_2$ were made by high energy ball milling. The rapid synthesis and sintering of the nanostructured $MgTiO_3$ compound was investigated by the high-frequency induction heated sintering process. The advantage of this process is that it allows very quick densification to near theoretical density and inhibition grain growth. Nanocrystalline materials have received much attention as advanced engineering materials with improved physical and mechanical properties. As nanomaterials possess high strength, high hardness, excellent ductility and toughness, undoubtedly, more attention has been paid for the application of nanomaterials. A highly dense nanostructured $MgTiO_3$ compound was produced with simultaneous application of 80 MPa pressure and induced current within 2 min. The sintering behavior, gain size and mechanical properties of $MgTiO_3$ compound were investigated.

고주파유도 가열에 의한 나노구조의 FeCrAlSi-Al2O3 복합재료의 합성 및 급속소결 (Rapid Sintering and Synthesis of Nanostuctured FeCrAlSi-Al2O3 Composite by High-Frequency Induction Heating)

  • 두송이;조승훈;고인용;도정만;윤진국;박상환;손인진
    • 대한금속재료학회지
    • /
    • 제49권3호
    • /
    • pp.231-236
    • /
    • 2011
  • Nanopowder of $Fe_2O_3$, Al, Cr and Si was fabricated by high energy ball milling. A dense nanostuctured $A_2O_3$ and $6.06Fe_{0.33}Cr_{0.16}Al_{0.23}Si_{0.29}$ composite was simultaneously synthesized and consolidated using high frequency induction heated sintering method within 1 minute from mechanically activated powders of $Fe_2O_3$, Al, Cr and Si. The grain sizes of $Al_2O_3$ and $Fe_{0.33}Cr_{0.16}Al_{0.23}Si_{0.29}$ in composite are 80 and 18 nm, respectively.

디지털 소자용 방열판 제작을 위한 초고속 금속필름 증착장치 및 공정기술 개발 (The development of ultra high-speed metal film deposition system and process technology for a heat sink in digital devices)

  • 윤효은;안성준;한동환;안승준
    • 한국산학기술학회논문지
    • /
    • 제18권7호
    • /
    • pp.17-25
    • /
    • 2017
  • 최근에 LED나 OLED와 같은 조명용 소자의 온도 상승에 따른 문제점을 개선하기 위하여 전기 도금 방법을 사용하여 제작한 두께가 두꺼운 금속 필름을 heat sink로 사용하고 있다. Cu 필름과 같은 두꺼운 금속 필름은 습식 방법인 전기 도금으로 제작하여 주로 소자의 방열판으로 사용되어 왔으나 건식의 증착 방법을 이용한 수 백 ${\mu}m$의 Cu 금속 필름에 대한 필요성이 요구되고 있다. 본 연구에서 설계 제작된 유도 가열 방식의 Cu 필름 증착 장비는 가열부가 세라믹 도가니 히터 부분과 세라믹 도가니 부분으로 분리된 이중 구조의 heating 방식을 채택하여 열 손실을 최소화 하고 보온 효과를 극대화시켰다. 또한 유도 가열 방식으로 초고속의 필름 증착 속도를 구현하였다. 그리고 열전도도가 높고 안정적인 두꺼운 Cu 필름 증착기술을 확보하고 최적화 하여 $1000{\AA}/s$의 증착율로 $100{\mu}m$의 필름을 증착 하였으며 ~2.0% 이내의 두께 균일도를 얻었다.

스컬용융법에 의한 루틸 단결정 성장메커니즘과 RE generator 조건에 관한 연구 (A study on the growth mechanism of rutile single crystal by skull melting method and conditions of RF generator)

  • 석정원;최종건
    • 한국결정성장학회지
    • /
    • 제15권5호
    • /
    • pp.175-181
    • /
    • 2005
  • 스컬용융법에 의해 루틸 단결정들을 성장시켰으며, 서로 다른 융액의 유지시간에 따른 ingot의 특성을 비교하였다. 스컬용융법은 교류전자기장(RF)에 의해 전기가 흐르는 융액의 직접유도가열에 근거하며, 가열은 RF 에너지의 흡수로 실행된다. $TiO_2$는 상온에서는 부도체이지만 온도가 올라갈수록 전기 전도성이 증가한다. 따라서, 초기 RF 유도가열을 위해 티타늄 금속 링(외경 : 6cm, 내경 : 4cm, 두께 : 0.2cm)을 $TiO_2$ 분말(아나타제상, CERAC, 3N)내부에 묻었다. 스컬용융법에 의한 산화물 용융에서 매우 중요한 것은 융점에서의 전기 저항 값, RF generator의 주파수 그리고 냉각도가니 크기이다. 본 연구에서는, $TiO_2$의 융점에서의 전기저항$(10^{-2}\~10^{-1}\;{\Omega}{\cdot}m)$은 알루미나$(10^{-1}\;{\Omega}{\cdot}m)$의 지르코니아$(10^{-3}\;{\Omega}{\cdot}m)$의 전기저항 데이터를 바탕으로 추정하였다. 냉각도가니의 내부직경은 11cm, 높이는 14cm였으며, 이것은 침투깊이$(0.36\~1.13cm)$와 RF generator 주파수를 고려하여 결정하였다