• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.452-455
• /
• 2008

A new passive control technique of cavity-induced pressure oscillations has been investigated numerically for a supersonic two-dimensional flow over open rectangular cavities at Mach number 1.83 just upstream of a cavity, in which a sub-cavity system is installed on the backward-facing step of the main cavity. A third-order TVD (Total Variation Diminishing) finite difference scheme with MUSCL is used to discretize the spatial derivatives in the unsteady compressible Navier-Stokes equations. The results obtained show that the present sub-cavity system is very effective in reducing cavity-induced pressure oscillations. The results also showed that the resultant amount of attenuation of cavity-induced pressure oscillations was dependent on the length and thickness of the flat plate, and also on the depth of the sub-cavity used as an oscillation suppressor.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.810-815
• /
• 2003

Flow-induced noise propagated from flow over a sphere is numerically investigated for laminar flow at Re = 300 and 425, and for turbulent flow at Re = 3700 and $10^4$, where the Reynolds number is based on the freestream velocity and the sphere diameter. The numerical method used for obtaining the flow over a sphere is based on an immersed boundary method in a cylindrical coordinate system. The Curle’s solutions of the Lighthill’s acoustic analogy with and without the far-field and compact-source approximation are used in order to investigate the noise field from flow over a sphere. Since the drag and lift forces change irregularly in time at Re = 425, 3700 and $10^{4}$, the noise propagates in a complicated manner. At Re = 300, 425 and $10^{4}$, the noise from dipole sources is much larger than that from quadrupole sources. On the other hand, at Re = 3700, the quadrupole source becomes dominant. The temporal variation of the flow-induced noise around a sphere is obtained at some observation points, which shows that the peak frequency corresponds to the Strouhal number associated with the wake instability.

• Journal of Microbiology
• /
• 제34권3호
• /
• pp.253-269
• /
• 1996

Infection of fish cells with IHNV resulted in gradual increase in cytosolic free Ca$\^$2+/ concentration ([Ca$\^$2+/)] in CHSE, gradual decrease in [Ca$\^$2+/] in FHM, and no significant change in RTG cells. The degree of [Ca$\^$2+/] increase or decrease was dependent on the amount of infectious virus, and these [Ca$\^$2+/] variations were maximal at 16 hours after virus infection (p. i.) in both cell lines. When the fish cells were infected with inactivated IHNV, evident variation in [Ca$\^$2+/] was not observed. Thus, infectivity of IHNV appears to correlate with changes in [Ca$\^$2+/] in virus-infected cells. These IHNV-induced [Ca$\^$2+/] changes were partially blocked by cycloheximide, but not affected by cordycepin. It seems to be that virus-induced Ca$\^$2+/ variations were more related with protein synthesis than RNA synthesis. Various Ca$\^$2+/ related drugs were used in search for the mechanisms of the [Ca$\^$2+/], changes following IHNV infection of CHSE cells. Decreasing extracellular Ca$\^$2+/ concentration or blocking Ca$\^$2+/ influx from extracellular media inhibited the IHNV-induced increase in [Ca$\^$2+/], in CHSE cells. Similar results were obtained with intracellular Ca$\^$2+/ sources are important in IHNV-induced [Ca$\^$2+/] increase in CHSE cells.

• Smart Structures and Systems
• /
• 제9권2호
• /
• pp.189-206
• /
• 2012

This paper focuses on the actuation system combined with a piezoelectric transducer and an electric circuit, which leads to a new insight; the electric actuation system is equivalent to mechanical variable-stiffness actuation systems. By controlling the switch in the circuit, the electric status of the piezoelectric transducer is changed, and consequently a variable-stiffness mechanism is achieved on the electric actuator. This proposed actuator features a shift in the equilibrium point of force, while conventional electrically-induced variable-stiffness actuators feature the variation of the stiffness value. We intensively focus on the equilibrium shift in the actuation system, which has been neglected. The stiffness of the variable-stiffness actuator is periodically modulated by controlling the switch, to suppress the vibration of the system in an open-loop way. It is proved that this electric actuator is equivalent to its mechanical counterpart, and that the electrical version has some practical advantages over the mechanical one. Furthermore, another kind of electrically-induced variable-stiffness actuator, using an energy-recycling mechanism is also discussed from the viewpoint of open-loop vibration control. Extensive numerical simulations provide comprehensive assessment on both electrically-induced variable-stiffness actuators employed for open-loop vibration control.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.114-122
• /
• 2024

Irradiation-induced defects and the precipitates in the wrapper material of the Indian Fast Breeder Test Reactor (FBTR), SS 316 are analyzed using the synchrotron source-based Angle Dispersive X-Ray Diffraction (ADXRD) technique with X-rays of energy 17.185 keV (wavelength ~0.72146 Å). The differences and similarities in the high displacement damage samples as a function of dpa (displacement per atom) and dpa rate in the range of 2.9 × 10^-7- 9 × 10^-7 dpa/s are studied. Ferrite and M₂₃C₆ are commonly observed in the present set of high displacement damage 40-74 dpa SS 316 samples irradiated at temperatures in the range of 400-483 ℃. Also, the dislocation density has increased as a function of the irradiation dose. The X-ray diffraction peak profile parameters quantified such as peak shift and asymmetry show that the irradiation-induced defects are sensitive to the dpa rate-irradiation temperature combinations. The increase in yield strength as a function of displacement damage is also correlated to the dislocation density.

• Journal of Radiation Protection and Research
• /
• 제28권2호
• /
• pp.117-125
• /
• 2003

$^{99m}Tc$ 표지 방사성의약품을 이용한 핵의학 영상검사를 받은 환자들에서 방사선 적응반응이 개인간에 어느 정도 차이가 있는지 알아보고자 하였다. $^{99m}Tc-DTPA$ 신장 신티그라피를 시행한 환자 23명, $^{99m}Tc-MDP$ 골 신티그라피를 시행한 환자 18명 및 $^{99}mTc-TF$ 심근관류 신티그라피를 시행한 환자 21명, 총 62명의 환자를 대상으로 방사성의약품 주사 전, 그리고 주사후 4시간째 채혈하여 림프구를 채취 배양하였다. 고선량 방사선조사는 배양 46시간째 $^{137}Cs$ 조사기를 사용하여 2 Gy의 감마선을 조사하였다. 불안정 염색체의 발생빈도를 Ydr값으로 표현하였고, 방사선 적응반응 지수(k)는 저선량 전처치후 Ydr값을 전처치 전 Ydr값으로 나누어 k값이 1 미만일 때 방사선 적응반음이 유도되는 것으로 간주하였다. 대상환자 62명 중 61명에서 방사선 적응반응이 유도되었고 $^{99m}Tc-DTPA,\;^{99m}Tc-MDP$ 및 Tc-99m-TF 환자군에서 k값의 변동계수 (CV)는 각각 35%, 34%, 21%였다. k값은 성별, 나이 및 병명과 상관관계가 없었다. 핵의학검사를 시행한 환자들에서 방사성 의약품에 의해 유도된 방사선 적응반응은 다양한 개인차가 있었으며, 성별, 나이 또는 병명과 관계없는 다른 원인에 의한 것으로 판단되었다.

• Korean Chemical Engineering Research
• /
• 제54권1호
• /
• pp.57-63
• /
• 2016

Polyvinylidene fluoride (PVDF) 평막 제조를 위하여 PVDF의 용매와 희석제로서 n-methyl-2-pyrrolidone (NMP)와 dibutyl-phthlate (DBP)를 각각 사용하여 열유도 상분리(thermally induced phase separation, TIPS)와 비용매유도 상분리(nonsolvent induced phase separation, NIPS)를 동시에 유도하였다. NMP와 DBP를 PVDF와 용융 혼합할 경우 TIPS 공정에서의 결정화 온도가 낮아졌고 NIPS 공정에서의 불안정 영역이 확대되었다. 용매와 희석제의 비율에 따라 상분리 메카니즘이 변화하였고 이에 따라 다양한 구조의 막이 형성됨을 확인하였다. 또한 dope 용액과 비용매의 접촉여부에 따라 지배적인 상분리 거동이 결정되었다. 열전달이 물질전달에 비하여 빠르게 이루어지므로 막의 표면은 NIPS에 의하여 지배를 받고 막의 내부는 TIPS에 의한 구조가 형성되었다. 또한 dope 용액의 급냉온도에 따라 상분리 메카니즘 및 상분리 속도가 변화하여 다양한 구조를 형성하였다.

• International Journal of Automotive Technology
• /
• 제6권6호
• /
• pp.555-561
• /
• 2005

This experimental study was executed to obtain basic data for actual engine operation using radical induced ignition method (RI) which can achieve emission reduction and high efficiency due to the rapid bulk combustion. In this study, a direct injection diesel engine was converted into SI type engine with a sparkplug. The modified SI type engine can be divided into two classes. One is the SI engine with a sparkplug only at the cylinder head, and the other is the SI engine with the sparkplug which is enveloped in a sub-chamber. Also, a basic experimental was conducted in order to investigate combustion mechanism of radical induced injection before the experiment execution for actual engine using the modified SI engine. The bulk combustion phenomenon of radical induced ignition method was analyzed from the basic experiment by using a constant volume chamber. Volume value of sub-chamber used in this experiment is approximately $0.2\%$ of one of the main combustion chamber. In this paper, combustion characteristics using radical induced injection method was compared with that of using spark ignition method according to change in the engine speed and equivalence ratio. As a result, in the case of the radical induced injection engine, the combustion duration and cycle variation were respectively reduced ranged from $\Phi$(equivalence ratio)=0.8 (lean mixture ratio) to $\Phi$=1.0 (stoichiometric ratio).

• Journal of Astronomy and Space Sciences
• /
• 제30권3호
• /
• pp.179-185
• /
• 2013

Photometric observation is one of the most effective techniques for determining the physical characteristics of unknown space objects and space debris. In this research, we examine the change in brightness of the Communication, Ocean, Meteorological Satellite-1 (COMS-1) Geostationary Orbit Satellite (GEO), and compare it to our estimate model. First, we calculate the maximum brightness time using our calculation method and then derive the light curve shape using our rendering model. The maximum brightness is then calculated using the induced equation from Pogson's formula. For a comparison with our estimation, we carried out photometric observation using an optical telescope. The variation in brightness and the shape of the light curve are similar to the calculations achieved using our model, but the maximum brightness shows a slightly different value from our calculation result depending on the input parameters. This paper examines the photometric phenomenon of the variation in brightness of a GEO satellite, and the implementation of our approach to understanding the characteristics of space objects.

• 공업화학
• /
• 제26권1호
• /
• pp.116-119
• /
• 2015

전계 효과 트랜지스터(FET) 기반의 이온 또는 바이오센서에 대한 연구는 지금까지 활발하게 이루어지고 있다. 본 논문에서는 여러 가지 측정 방법 중에 FET 게이트 절연체 위의 감지막과 이온 또는 생분자의 상호작용으로 전하 분포의 변화가 일어나면 이로 인해 드레인 전류의 변화를 측정하는 방법을 기반으로, 동일한 입력 신호, 즉 동일한 이온 또는 생분자의 농도에 대해 최적의 출력 신호를 얻기 위한 방법에 대해 논의한다. 대표적인 FET 센서는 이온 감지 FET (ISFET)로 본 논문에서는 pH를 측정하는 센서를 이용하였다. ISFET는 게이트 전압 대신 기준전극 전압을 가하는데 이 기준전극 전압과 드레인 전류의 관계식을 측정하여, 가장 기울기가 큰 곳을 찾아 이를 기준으로 동작범위에서의 입력 변화에 대해 출력 신호인 포화영역에서 드레인 전류의 변화가 큰 조건을 설정해 보았다.