• Journal of the Korea Management Engineers Society
• /
• v.23 no.4
• /
• pp.179-195
• /
• 2018

So far, the evaluation of machine translation has used a numerical approach, but there is evidence that it is not sufficient to reflect the characteristics or behavior of machine translation users(Hutchins, 2007; Wu et al., 2016; Park et al., 2013). Therefore, this study focused on the purpose of use and purchasing behavior of machine translation users. At this time, the indirect comparison method introduced by Morgan and Hunt(1994) was used to measure cognitive gaps and analyze the purchasing behavior of users. According to the analysis of association rules using cognitive gaps, the smaller the cognitive gap, the more positive the purchase behavior. In addition, procedural knowledge derived from language knowledge is activated in situations involving responsibility, and in routine situations, procedural knowledge trained from pragmatic knowledge works.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.1
• /
• pp.83-93
• /
• 2008

The topographic effect is one of the most important component in the solution of the geodetic boundary value problem (geodetic BVP). Therefore, topographic effect should be considered properly for developing the precise geoid model, especially for the area where contains many mountains like Korea. The selection of gravity reduction method in the context of the precise geoid determination depends on the magnitude of its indirect effect, the smoothness and magnitude of the reduced gravity anomalies, and their related geophysical interpretation. In this study, Korean digital elevation model with 100m resolution was constructed and topographic effect was calculated by three reduction methods as like Helmert condensation method and RTM method and Airy-isostatic reduction method. Through the analysis of computation results, we can find that RTM reduction method is the best optimal method and the results shows that gravity anomaly and indirect effect of geoidal height are $0.660{\pm}13.009mGal$, $-0.004{\pm}0.131m$ respectively and it is the most gentle slow of the three methods. Through this study, it was found that the RTM method is better suitable for calculating topographic effect precisely in context of precise geoid determination in Korea than other reduction methods.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.1
• /
• pp.1-11
• /
• 2010

The purpose of this paper is to evaluate supply factors of urban parks to answer the research question: What are the causal effects of supply factors of urban parks on visitor satisfaction? After reviewing the literature and the Korean park planning process, we constructed a conceptual framework and have formulated the hypothesis of this research. We had obtained data through a questionnaire, which surveyed 452 visitors at 8 urban parks in Daegu Metropolitan City in 2008, based on a stratified sampling method. After the elimination of 96 unsuitable samples, we have analyzed the data using descriptive statistical methods, Pearson's correlation analysis and a path analysis method. We have found that: 1) While the direct and indirect effect of accessibility(ACC) on visitor satisfaction(VS) turned out to be 0.184 and 0.220, respectively, the indirect effect of information(IFM) and promotion(PRM) on VS turned out to be 0.101 and 0.177, respectively. 2) While the direct and indirect effect of service(SVR) on VS turned out to be 0.130 and 0.236, respectively, the direct effect of ACC turned out to be 0.698. 3) While the direct effect of ACC, SVR and attraction(ATT) on VS turned out to be 0.184, 0.130 and 0.698, respectively, composing 67.96% of causal effect, the indirect effect of ACC, IFM, PRM and SVR on VS turned out to be 0.220, 0.101, 0.177 and 0.236, respectively, composing 42.04% of causal effect. 4) The magnitude of causal effect of supply factors on VS turned out to be ATT(39.98%), ACC(23.14%), SVR(20.96%), PRM(10.14%) and IFM(5.78%) in order, and 5) the causal effect of external supply factors of ACC, IFM and PRM compose 39.06% of the causal effect while that of the internal supply factors of SVR and ATT is 69.94%. The research results suggest that: 1) Planning for park marketing strategy and remedial directions for existing urban parks, in order to increase visitor satisfaction, be focused on IFM and PRM, especially. 2) The research approach and path analysis method adopted by this research be valid and highly useful for planning and evaluation of other recreation areas. It is recommended that: 1) Structural Equation Model on supply factors of urban parks be established in the future. 2) Evaluation of supply factors by type of urban park be performed.

• The KSFM Journal of Fluid Machinery
• /
• v.2 no.1 s.2
• /
• pp.29-34
• /
• 1999

To develop the efficient numerical optimization method for the design of an airfoil, an evaluation of various methods coupled with two-dimensional Naviev-Stokes analysis is presented. Simplex method and Hook-Jeeves method we used as direct search methods, and steepest descent method, conjugate gradient method and DFP method are used as indirect search methods and are tested to determine the search direction. To determine the moving distance, the golden section method and cubic interpolation method are tested. The finite volume method is used to discretize two-dimensional Navier-Stokes equations, and SIMPLEC algorithm is used for a velocity-pressure correction method. For the optimal design of two-dimensional airfoil, maximum thickness, maximum ordinate of camber line and chordwise position of maximum ordinate are chosen as design variables, and the ratio of drag coefficient to lift coefficient is selected as an objective function. From the results, it is found that conjugate gradient method and cubic interpolation method are the most efficient for the determination of search direction and the moving distance, respectively.

• Journal of Internet of Things and Convergence
• /
• v.8 no.5
• /
• pp.11-16
• /
• 2022

As an interest in the development of artificial intelligence(AI) technology in the water supply sector increases, we have developed an AI algorithm that can predict improvement decision-making ratings through repetitive learning using the data of pipe condition evaluation results, and present the most reliable prediction model through a verification process. We have developed the algorithm that can predict pipe ratings by pre-processing 12 indirect evaluation items based on the 2020 Han River Basin's basic plan and applying the AI algorithm to update weighting factors through backpropagation. This method ensured that the concordance rate between the direct evaluation result value and the calculated result value through repetitive learning and verification was more than 90%. As a result of the algorithm accuracy verification process, it was confirmed that all water pipe type data were evenly distributed, and the more learning data, the higher prediction accuracy. If data from all across the country is collected, the reliability of the prediction technique for pipe ratings using AI algorithm will be improved, and therefore, it is expected that the AI algorithm will play a role in supporting decision-making in the objective evaluation of the condition of aging pipes.

• Journal of Technologic Dentistry
• /
• v.39 no.1
• /
• pp.9-16
• /
• 2017

Purpose: The purpose of this study was to evaluate flexural strength, composite surface and fractured surface of three different indirect composite resins. Methods: Fifteen bar-shaped specimens ($25mm{\times}2mm{\times}2mm$) were fabricated for each FL group (Flow type and Light curing) and PLP group (Putty type and Light, Pressure curing) and PL group (Putty type and Light curing) according to manufacturer's instructions and ISO 10477. Fabricated specimens were stored in the distilled water for 24 hours at the temperature of $37^{\circ}C$. Three-point bending strength test was performed to measure flexural strength using universal testing machine at a crosshead speed of 1mm/min (ISO 10477). Surface and fractured surface of specimens were observed by digital microscope. Results were analyzed with Kruskal-wallis tests (${\alpha}=0.05$). Results: Mean (SD) of three different indirect composite resins were 83.38 (6.67) MPa for FL group, 139.90(16.53) MPa for PLP group and 171.72(16.74) MPa for PL group. Flexural strength were statistically significant (p<0.05). Differences were not observed at fractured surface among three groups. However, many pores over $100{\mu}m$ were observed at PL group in observing surface of specimen. Conclusion: Flexural strength of composite resins was affected by second polymerization method and content of inorganic filler.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.6
• /
• pp.743-751
• /
• 2010

It requires an interim performance assessment for BTL business of the sewerage rehabilitation which continues from 2005 till now. Means, It is necessary to make an interim performance assessment and an analysis of an business effect of the sewerage rehabilitation BTL projects which still continues, and we presented an improvement method of the new sewerage rehabilitation project in future. This paper has conducted an analysis of the business effect for 3 local government BTL projects which are completed and under operation as of now in Jincheon-Gun, Cheongju-Si and Gangjin-Gun. As a method of business effect analysis, we conducted a business effect of the 3 places using the index set which we previously set for the business effect analysis. The index set in this research was sectionalized to an improvement effect of operating wastewater treatment plant, an benefit effect of the direct cost, an benefit effect of the indirect cost and an environment friendly effect. We, in this paper, conducted an business effect analysis for 3 sewerage rehabilitation BTL projects which are completed or under operation recently as a demonstration, however we judge that an business effect analysis shall be conducted in a stage that a significant time for operation has passed since the completion of the construction in order to induce an actual business effect of the sewerage rehabilitation BTL project.

• Journal of radiological science and technology
• /
• v.43 no.1
• /
• pp.15-21
• /
• 2020

This study was purpose to evaluation of Modulation Transfer Function in Measurements by using the International electrotechnical commission standard(IEC 62220-1) which were edge device each angle by using edge method. In this study was Aero(Konica, Japan) image receptor which is a indirect Flat panel detector(FPD) was used. The size of matrix 1994 × 2430 (14"× 17" inch) which performed 12 bit processing and pixel pitch is 175 ㎛. The results of shown as MTF measurements at IEC standard. The amount of data seemed reasonable and at an MTF value of 0.1 the spatial frequencies were 2.56 cycles/mm at an angle of 2.4°. MTF value of 0.5 the spatial frequencies were 1.32 cycles/mm at an angle of 2.4°. This study were to evaluate MTF by setting each angle 2.0°~2.8° degrees the most effective optimal edge angle and to suggest the quantitative methods of measuring by using IEC.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.3
• /
• pp.82-90
• /
• 2013

Concentration errors critically affect the performance of solar concentrator, so their evaluation is important to the concentrated solar power technology. However, the evaluation is very challenging because error sources are various and not easy to measure individually. Therefore, the integrated effect of concentration errors is often more interesting and useful for large-scale applications. In the present work, we analytically investigate and classify various concentration error sources and then explain that the effect of various concentration errors can be represented in terms of a root mean square value of reflector surface slope error. We present an indirect approach to assessing the reflector surface slope error by comparing solar flux measurement data with modeling calculations. We apply the approach for solar furnaces with different thermal capacity and investigate its advantages and disadvantages.

• Earthquakes and Structures
• /
• v.12 no.1
• /
• pp.47-54
• /
• 2017

Introduction of robustness index in the structure is done in three ways: deterministic robustness index, probabilistic robustness index, and risk-based robustness index. In past decades, there have been numerous researches to evaluate robustness index in both deterministic and probabilistic ways. In this research, by using a risk analysis, a risk-based robustness index has been defined for the structure. By creating scenarios in accordance with uncertainty parameters of critical and unexpected gas blast accident, a new method has been suggested for evaluating risk-based robustness index. Finally, a numerical example for the evaluation of risk-based robustness index of a four-storey reinforced concrete moment frame, designed and built based on Eurocode 8 code, has been presented with results showing a lower risk of robustness.