• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.2
• /
• pp.70-76
• /
• 2014

In industrial situation, electronic and electro-mechanical systems have been using different type of batteries in rapidly increasing numbers. These systems commonly require high reliability for long periods of time. Wider application of battery for low-power design as a prime power source requires us knowledge of failure mechanism and reliability of batteries in terms of load condition, environment condition and other explanatory variables. Battery life is an important factor that affects the reliability of such systems. There is need for us to understand the mechanism leading to the failure state of battery with performance characteristic and develop a method to predict the life of such battery. The purpose of this paper is to develope the methodology of monitoring the health of battery and determining the condition or fate of such systems through the performance reliability to predict the remaining useful life of primary battery with load condition, operating condition, environment change in light of battery life variation. In order to evaluate on-going performance of systems and subsystems adopting primary batteries as energy source, The primitive prototype for performance reliability analysis device was developed and related framework explained.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.850-857
• /
• 2005

Sensor networks consist of sensor nodes with small size, low cost, lowpower consumption, and multi-functions to sense, to process and to communicate. The main issue in sensor networks has been focused on minimizing power consumption of sensors to maximize network life time. In some critical applications, however, the most important issue is to transmitsensing information to the end user (the sink node) with reliability. Reliable information forwarding using multiple paths in sensor networks (ReinForM) has been proposed to achieve desired reliability in the error-prone channel, but it needs increasing transmission riverhead as the channel error rate becomes high and the number of hops between the source node and the sink node increases. In this paper, we propose a reliable transmission rnechanissmusing intermediate source nodes in sensor networks (ReTrust) to reduce packet overhead while keeping the desired reliability. ReTrust has beenshown to provide desired reliability and reduced overhead via simulationsand analysis.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.4
• /
• pp.296-299
• /
• 2008

The effects of radio frequency (RF) source power for decoupled plasma nitridation (DPN) process on the electrical properties and Fowler-Nordheim (FN) stress immunity of the oxynitride gate dielectrics for deep nano-technology devices has been investigated. With increase of RF source power, the threshold voltage (Vth) of a NMOS transistor(TR) decreased and that of a PMOS transistor increased, indicating that the increase of nitrogen incorporation in the oxynitride layer due to higher RF source power induced more positive fixed charges. The improved off-current characteristics and wafer uniformity of PMOS Vth were observed with higher RF source power. FN stress immunity, however, has been degenerated with increasing RF source power, which was attributed to the increased trap sites in the oxynitride layer. With the experimental results, we could optimize the DPN process minimizing the power consumption of a device and satisfying the gate oxide reliability.

• The Korean Journal of Health Service Management
• /
• v.8 no.1
• /
• pp.15-25
• /
• 2014

This study is to confirm that SNS information characteristics have an effect on choosing hospital care and satisfaction on hospital. This study is conducted with a total of 301 respondents (150 of document investigation and 151 of mobile SNS research) from 16th January 2014 to 29th January. 168 respondents who have experience to collect SNS health information within 6 months recently was selected subject of analysis. In the results, we could confirm the followings. The reliability among SNS information characteristics has effect on convenience that is source of choosing hospital care. The reliability and agreement have effect on the professionalism among source of choosing hospital care. In the influence on having hospital satisfaction, the more reliable and agreeable, the more increasing of hospital satisfaction. In the influence between hospital choice element and hospital satisfaction, the more convenient and service available, the more increasing of hospital satisfaction. In conclusion, it is expecting to contribute SNS managers or marketer of medical institutions to taking out commitment on medical consumer's SNS.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.524-528
• /
• 1998

The voltage-source inverters are normally equipped with an electrolytic capacitor in their DC link, however, the electrolytic capacitor has several disadvantages such as increasing size, limiting converter life and reliability. Therefore, several approaches for removing the DC link capacitor have been studied by the authors. This paper proposes a new voltage-source inverter without DC link components. To reduce waveform distortion of the AC source current, the current-controlled PWM-rectifier with di/dt feedback is introduced. The di/dt feedback gain and LC parameters are investigated by calculation for a 0.75kW induction motor driven by this inverter. The calculated AC source currents maintain nearly sinusoidal waveforms with a unity power factor.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.2
• /
• pp.223-229
• /
• 2013

Restructuring and recent developments in the power system and problems arising from construction and maintenance of large power plants, increasing amount of interest in distributed generation (DG) source. Distributed generation units due to specifications, technology and location network connectivity can improve system and load point reliability indices. In this paper, the allocation and sizing of DG in distribution networks are determined using optimization. The objective function of the proposed method is to improve customer-based reliability indices at lowest cost. The placement and size of DGs are optimized using a Genetic Algorithm (GA). To evaluate the proposed algorithm, 34-bus IEEE test system, is used. The results illustrate efficiency of the proposed method.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.7
• /
• pp.249-258
• /
• 2018

The importance of software in military weapon systems is increasing, and the software structure is becoming more complicated. We therefore must thoroughly verify its reliability. In particular, the defects from the interaction of the software components that make up the weapon system are difficult to prevent only with static testing and code coverage level dynamic testing. In this paper, we classify dynamic software defect types and analyze the issues reported in the Open Source Software (OSS) used in the US department of defense weapon systems. The dynamic defects classified in this paper usually occur after integration, and it is difficult to reproduce and identify the cause. Based on this analysis, we come to the point that the software integration test must be enhanced in order to verify the reliability of the weapon system.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.8
• /
• pp.661-667
• /
• 2004

The characteristics of noise and vibration by a heavy impact source was studied. The triggering method was used for increasing the reliability and stability to measure the level of sound pressure. sound intensity and vibration acceleration. A simple finite element model and a rigid body analysis method were suggested to calculate the natural frequencies of the multi-layer floor system. The results show that the resilient materials decrease the natural frequency of the reinforced concrete slab, make a resonance with dominant driving frequency in the low frequency region, and increase the vibration and noise level. A simple finite element model and rigid body models was suggested to calculate the natural frequencies of the floor systems.

• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1844-1854
• /
• 2018

Isolated power systems (IPS) are often characterized by a weak grid due to small power grids. The grid side voltage is no longer equivalent to an ideal voltage source of an infinitely big power grid. The conversion control of new energy sources, parameter perturbations as well as the load itself can easily cause the system voltage to oscillate or to become unstable. To solve this problem, increasing the energy-storage power sources is usually used to improve the reliability of a system. In order to provide support for the voltage, the energy-storage power source inverter needs an method to control the voltage source. Therefore, this paper has proposed the active damping control of a voltage source inverter (VSI) based on virtual compensation. By simplifying the VSI double closed-loop control, two feedback compensation channels have been constructed to reduce the VSI output impedance without changing the characteristics of the voltage gain of a system. This improvement allows systems to operate stably in a larger range. A frequency-domain analysis, and simulation and experimental results demonstrate the feasibility and effectiveness of the proposed method.

• The Korean Journal of Applied Statistics
• /
• v.3 no.1
• /
• pp.27-46
• /
• 1990

In this paper, wer propose many problems by analyzing the various currently statistics, propose the basic principal for the more precise performance of sample survey, and at the same time propose the method(principal) for detecting and manipulationg the source of error. Finally, we are to improving the statistical reliability and increasing the user's convenience by standardizing the statistical reporting form.