• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.600-601
• /
• 2015

Both the importance and process of estimating Nuclear-power plant construction time and cost have increased in significance as energy user costs themselves have become more significant. In estimating construction time, few parameters are more significant than work item production rates and factors significantly affecting the rates. A standardized data collection tool was used to acquire a total of 401 data points from a S Nuclear-power plant project, for selected critical works: form-work, rebar-work, and concrete-pouring. With the data, several hypothesized drivers of the man-hour production rates and crew-day production rates were also analyzed. Findings from this study will enable industry professionals to enhance accuracy of time and cost estimation for nuclear power plant construction.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1040-1043
• /
• 2004

As time goes by, the market demand increases and each LCD panel manufacturing company makes every effort to produce more panels in a limited time. It is necessary to reduce the cost and time of production for the improvement of productivity in manufacturing companies. The increased speed of thin films growth used in the TFT process brings improvement of productivity but it is also accompanied by a drop in display quality due to a characteristic change of the thin film. So in our dissertation, we deal with the increased speed of a-Si layer growth and the proportioned a drop in characteristic quality. We discuss a drop in display quality by a characteristic change of a-Si layer and we propose a counter-plan through panel design improvement. We have already applied our plan to the 15" XGA panel and confirmed the improved result.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.223-226
• /
• 2002

To maximize the productivity in machining molds and dies, machine tools should operate at high speeds. However, the productivity of mold manufacturing has not increased significantly because CNC milling machines have massive slides, which do not allow rapid acceleration and deceleration during the frequent starts/stops encountered in machining molds and dies. This paper presents the use of composites for these slides to overcome this limitation. The vertical and horizontal slides of a large CNC machine were constructed by bonding high-modulus carbon-fiber epoxy composite sandwiches to welded steel structures using adhesives. These composite structures reduced the weight of the vertical and horizontal slides by 34% and 26%, respectively, and increased damping by 1.5 to 5.7 times without sacrificing the stiffness. Without much tuning, this machine had a positional accuracy of $\pm5\mu\textrm{m}$ per 300 m of the slide displacement.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.311-314
• /
• 2003

Under hyperosmotic stress, rCHO cells display decreased specific growth rate $({\mu})$ and increased specific antibody productivity $(q_{Ab})$. The effects of hyperosmotic stress on batch culture cellular dynamics are not well understood. To this end, we conducted a proteome profile of rCHO cells, using 2D-gel, MALDI-TOF-MS and MS/MS. As a result, the proteome profile of rCHO cells could be established using 41 identified proteins. Based on this proteome profile of rCHO cells, we have found at least 8 differently expressed spots at hyperosmotic osmolality (450 mOsm/kg). Among these spots, two metabolic enzymes were found to be up-regulated (pyruvate kinase and GAPDH), while down-regulated protein was identified as tubulin. It shows that hyperosmotic stress can alter metabolic state, by up-regulated activities of two glycolysis enzymes, which could lead to activate the generation of metabolic energy. Tubulin expression was down-regulated, suggesting a reduction of cell division. Finally, the increased conversion energy could leads to improve overall productivity.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1436-1441
• /
• 2004

Achieving the maximum blasting efficiency with minimum abrasive consumption is a critical concern in surface preparation stage of shipbuilding and offshore industry. Increasing the abrasive flow rate beyond the optimum point results in a major reduction in productivity even though the amount of abrasive used is larger. So, this study is intend to find out the optimum abrasive-to-air mixing ratio which can make a significant improvement in blasting efficiency and remarkably reduce the amount of abrasive used. From the test results, it can be identified that as the abrasive feeding rate is increased linearly, blasting efficiency is increased to a maximum point and then gradually decreased in the form of a bell-shaped.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.1
• /
• pp.11-17
• /
• 2001

To enhance the productivity and activity of nitrile hydratase in Rhodococcus rhodochrous M33, a glucose-limited fed-batch culture was performed. In a fed-batch culture where the glucose was controlled at a limited level and cobalt was supplemented during the fermentation period, the cell mass and total activity of nitrile hydratase both increased 3.3-fold compared to that in the batch fermentation. The productivity of nitrile hydratase also increased 1.9-fold compared to that in the batch fermentation. The specific activity of nitrile hydratase in the whole cell preparation when using a fed-batch culture was 120 units/mg-DCW, which was similar to that in the batch culture.

• Transactions of Materials Processing
• /
• v.17 no.4
• /
• pp.257-262
• /
• 2008

The control of wire temperature is very important in the fine wire drawing process. The wire speed should be increased, and the wire temperature should be dropped as much as possible. Up to now, the process design of wire drawing process depends on the experiences of experts. In this study, a wire drawing process design method was proposed to increase the productivity. The proposed method of this study includes the pass schedule and the design of a multi pass wire drawing machine. A pass schedule was performed based on the calculation of the wire temperature. Also, a new multi pass wire drawing machine was manufactured to apply the designed pass schedule. Through the wire drawing experiment, the effectiveness of the proposed process design method was evaluated. The final drawing speed was increased from 1,100m/min to 2,000m/min without deterioration of final drawn wire.

• Management & Information Systems Review
• /
• v.8
• /
• pp.1-23
• /
• 2002

Technical innovation is very important in the small and medium enterprises. All successful innovation stars from a creative ideas, it be a new application for a technology, the satisfaction of a new identified need or of an old need in a new way, or the manufacture of a product by a different method. The purpose of this study is to investigate into the implementation effect of IMS(information management system) for information in small and medium enterprises. This research analysis was done as to small and medium enterprises of 24. The Results for this research analysis was as follows. First, the satisfaction scored 4.10 in information level up of the small and medium enterprises. Second, increased effect productivity scored 3.37 in samples of 17. Thrid, increased management efficiency productivity scored 3.14 in samples of 17.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.8-9
• /
• 2019

Euro forms and aluminum forms, which are currently used in formwork construction sites are limited by their heavy weight and the use of environmentally hazardous form oils. Therefore, in this study, 'eco-friendly light weight form' was developed, which does not require form oils during the removal process of form. In addition, the superiority of the developed form was verified by comparison with Euro forms and aluminum forms in terms of noise generation and weight. Application of the eco-friendly light weight form in construction sites is expected to reduce the noise level, and increase workers' convenience. The productivity of formwork is also increased.

• Journal of the Korean earth science society
• /
• v.41 no.4
• /
• pp.381-390
• /
• 2020

When a radial collector well is installed and operated for agricultural purposes, negative impacts may be observed over time due to the clogging of horizontal arms, such as reduced groundwater discharge and water quality deterioration. When radial collector well No. 2 was rehabilitated using the high-pressure impulse generation technique, the specific capacity and transmissivity were increased by 43.1 and 100.6%, respectively. In contrast, according to air surging, the specific capacity and transmissivity increased by 33.8 and 85.8%, respectively, compared to the initial rate before rehabilitation. During the operation of radial collector wells since construction, the time of well rehabilitation can be effectively determined by continuously monitoring the groundwater level and pumping rate of the radial collector wells, thereby preventing a decrease in productivity.