• ETRI Journal
• /
• v.24 no.4
• /
• pp.270-279
• /
• 2002

We present a self-consistent numerical method for calculating the conduction-band profile and subband structure of AlGaN/GaN single heterojunctions. The subband calculations take into account the piezoelectric and spontaneous polarization effect and the Hartree and exchange-correlation interaction. We calculate the dependence of electron sheet concentration and subband energies on various structural parameters, such as the width and Al mole fraction of AlGaN, the density of donor impurities in AlGaN, and the density of acceptor impurities in GaN, as well as the electron temperature. The electron sheet concentration was sensitively dependent on the Al mole fraction and width of the AlGaN layer and the doping density of donor impurities in the AlGaN. The calculated results of electron sheet concentration as a function of the Al mole fraction are in excellent agreement with some experimental data available in the literature.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.633-636
• /
• 1998

In this study, power AlGaAs/InGaAs/GaAs PM-HEMT's for mm wave's were fabricated using Electron beam lithography and air-bridge techniques, and so on. DC and AC characteristics of the fabricated power PM-HEMTs were measured under the various bias conditions. For example, DC and RF characteristics such as S21 gain of 3.6 dB at 35 ㎓, current gain cut-off frequencies of 45 ㎓ and maximum oscillation frequencies of 100 ㎓ were carefully analyzed for design methodology of sub-mm wave power devices.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.11
• /
• pp.1-8
• /
• 2011

One of the most important parameters that limit maximum output power of transistor is breakdown. InAlAs/InGaAs/GaAs Metamorphic HEMTs (MHEMTs) have some advantages, especially for cost, compared with InP-based ones. However, GaAs-based MHEMTs and InP-based HEMTs are limited by lower breakdown voltage for output power even though they have good microwave and millimeter-wave frequency performance with lower minimum noise figure. In this paper, InAlAs/$In_xGa_{1-x}As$/GaAs MHEMTs are simulated and analyzed for breakdown. The parameters affecting breakdown are investigated in the fabricated 0.1-${\mu}m$ ${\Gamma}$-gate MHEMT device having the modulation-doped $In_{0.52}Al_{0.48}As/In_{0.53}Ga_{0.47}As$ heterostructure on the GaAs wafer using the hydrodynamic transport model of a 2D commercial device simulator. The impact ionization and gate field effect in the fabricated device including deep-level traps are analyzed for breakdown. In addition, Indium mole-fraction-dependent impact ionization rates are proposed empirically for $In_{0.52}Al_{0.48}As/In_xGa_{1-x}As$/GaAs MHEMTs.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.6
• /
• pp.225-231
• /
• 2016

The valence band maximum (VBM) and conduction band minimum (CBM) of Al-doped GaInAsSb alloys substrated on GaSb are calculated by using an analytic approximation based on the tight binding method. The relative positions of the VBM and CBM between Al-GaInASSb and GaSb determine band alignement type, valence band offset (VBO) and conductin band offset (CBO) for the heterojunctions. In this study, aluminium doping is assumed to be substituted in the cation site and limited up to 20 % because it can easily oxidize and degrade materials. It is found that the Al-doped alloys exhibit type-II band alignments over the entire composition range and make the band gaps increase, whereas the VBO and CBO decrease. The decreasing rate of VBO is higher than that of CBO, which implies the Al components play a decisive role in controlling electrons at the interface. The Al-dopled GaInAsSb alloy has a direct band gap induced by $E({\Gamma})$ with a considerable distance from the E(L) and E(X), however, $E({\Gamma})$ approaches to E(L) and E(X) in the high Sb concentration (Sb > 0.7-0.8) which might affect the electron mobility and degrade the optical quality.

• Journal of the Korean Vacuum Society
• /
• v.18 no.4
• /
• pp.288-295
• /
• 2009

We report the etch characteristics of GaAs and AlGaAs in the diffusion pump-based capacitively coupled $BCl_3$ plasma. Process variables were chamber pressure ($50{\sim}180$ mTorr), CCP power ($50{\sim}200\;W$) and $BCl_3$ gas flow rate ($2.5{\sim}10$ sccm). Surface profilometry was used for etch rate and surface roughness measurement after etching. Scanning electron microscopy was used to analyze the etched sidewall and surface morphology. Optical emission spectroscopy was used in order to characterize the emission peaks of the $BCl_3$ plasma during etching. We have achieved $0.25{\mu}m$/min of GaAs etch rate with only 5 sccm $BCl_3$ flow rate when the chamber pressure was in the range of 50{\sim}130 mTorr. The etch rates of AlGaAs were a little lower than those of GaAs at the conditions. However, the etch rates of GaAs and AlGaAs decreased significantly when the chamber pressure increased to 180 mTorr. GaAs and AlGaAs were not etched with 50 W CCP power. With $100{\sim}200\;W$ CCP power, etch rates of the materials increased over $0.3{\mu}m$/min. It was found that the etch rates of GaAs and AlGaAs were not always proportional to the increase of CCP power. We also found the interesting result that AlGaAs did not etched at 2.5 sccm $BCl_3$ flow rate at 75 mTorr and 100 W CCP power even though it was etched fast like GaAs with more $BCl_3$ gas flow rates. By contrast, GaAs was etched at ${{\sim}}0.3{\mu}m$/min at the 2.5 sccm $BCl_3$ flow rate condition. A broad molecular peak was noticed in the range of $500{\sim}700\;mm$ wavelength during the $BCl_3$ plasma etching. SEM photos showed that 10 sccm $BCl_3$ plama produced more undercutting on GaAs sidewall than 5 sccm $BCl_3$ plasma.

• Korean Journal of Materials Research
• /
• v.10 no.10
• /
• pp.698-702
• /
• 2000

The characteristics of optical absorption in $Al_{0.24}Ga_{0.76}As/GaAs$ multi-quantum wells(MQWs) structure were investigated by using the surface photovoltage(SPV). The Spy features near 1.42 eV showed two overlapping signals. By chemical etching, we found associated with the GaAs substrate and the GaAs cap layer. The Al composition(x=24 %) was determined by Kuech's composition formula. In order to identify the transition energies. the experimentally observed energies were compared with results of the envelope function approximation for a rectangular quantum wells An amplitude variation of the relative Spy intensity from the GaAs substrate, llH, and llL was observed at different light intensities. A variation in the SPY line shape of the transition energies were observed with decreasing tempera­t ture.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.4
• /
• pp.334-338
• /
• 2003

$BCl_3$고밀도 평판형 유도결합 플라즈마(High Density Planar Inductively Coupled Plasma)를 이용하여 AlGaAs와 InGaP의 건식식각에 대하여 연구하였다. 본 실험에서는 ICP 소스파워(0∼500 W), RIE 척 파워(0-150 W), 공정압력(5∼15 mTorr)의 변화에 따른 AlGaAs와 InGaP의 식각률, 식각단면 그리고 표면 거칠기 등을 분석 하였다. 또, 공정 중 OES(Optical Emission Spectroscopy)를 이용하여 in-situ로 플라즈마를 관찰하였다. $BCl_3$ 유도결합 플라즈마를 이용한 AlGaAs의 식각결과는 우수한 수직측벽도와(>87$^{\circ}$) 깨끗하고 평탄한 표면(RMS roughness = 0.57 nm)을 얻을 수 있었다. 반면, InGaP의 경우에는 식각 후 표면이 다소 거칠어진 것을 확인할 수 있었다. 모든 공정조건에서 AlGaAs의 식각률이 InGaP보다 더 높았다. 이는 $BCl_3$ 유도결합 플라즈마를 이용하여 InGaP을 식각하는 동안 $InCl_{x}$ 라는 휘발성이 낮은 식각부산물이 형성되어 나타난 결과이다. ICP 소스파워와 RIE 척파워가 증가하면 AlGaAs와 InGaP모두 식각률이 증가하였지만, 공정압력의 증가는 식각률의 감소를 가져왔다. 그리고 OES peak세기는 공정압력과 ICP 소스파워의 변화에 따라서는 크게 변화하였지만 RIE 척파워에 따라서는 거의 영향을 받지 않았다.

• Proceedings of the Optical Society of Korea Conference
• /
• 1998.08a
• /
• pp.200-201
• /
• 1998

• Korean Journal of Materials Research
• /
• v.9 no.5
• /
• pp.460-466
• /
• 1999

The deep level electron traps in AP-MOCVD GaAs/undoped Al\ulcornerGa\ulcornerAs/n-type GaAs heterostructures have been investigated by means of Deep Level Transient Spectroscopy DLTS). In terms of the experimental procedure, GaAs/undoped Al\ulcornerGa\ulcornerAs/n-type GaAs heterostructures were deposited on 2" undoped semi-insulating GaAs wafers by the AP-MOCVD method at $650^{\circ}C$ with TMGa, AsH3, TMAl, and SiH4 gases. The n-type GaAs conduction layers were doped with Si to the target concentration of about 2$\times$10\ulcornercm\ulcorner. The Al content was targeted to x=0.5 and the thicknesses of Al\ulcornerGa\ulcornerAs layers were targeted from 0 to 40 nm. In order to investigate the electrical characteristics, an array of Schottky diodes was built on the heterostructures by the lift-off process and Al thermal evaporation. Among the key results of this experiment, the deep level electron traps at 0.742~0.777 eV and 0.359~0.680 eV were observed in the heterostructures; however, only a 0.787 eV level was detected in n-type GaAs samples without the Al\ulcornerGa\ulcornerAs overlayer. It may be concluded that the 0.787 eV level is an EL2 level and that the 0.742~0.777 eV levels are related to EL2 and residual oxygen impurities which are usually found in MOCVD GaAs and Al\ulcornerGa\ulcornerAs materials grown at $630~660^{\circ}C$. The 0.359~0.680 eV levels may be due to the defects related with the al-O complex and residual Si impurities which are also usually known to exist in the MOCVD materials. Particularly, as the Si doping concentration in the n-type GaAs layer increased, the electron trap concentrations in the heterostructure materials and the magnitude of the C-V hysteresis in the Schottky diodes also increased, indicating that all are intimately related.ated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.158-158
• /
• 2010

본 연구에서는 분자선 박막성장 장비를 (MBE) 이용하여 droplet epitaxy 방법으로 성장시킨 GaAs/AlGaAs 양자점구조의 표면전기장변화에 관하여 photoreflectance spectroscopy (PR)를 이용하였다. 본 실험에 사용된 GaAs/AlGaAs 양자점 구조는 undoped-GaAs (001) 기판을 위에 성장온도 $580^{\circ}C$에서 GaAs buffer layer를 100 nm 성장 후 장벽층으로 AlGaAs을 100 nm 성장하였다. AlGaAs 장벽층을 성장한 후 기판온도를 $300^{\circ}C$로 설정하여 Ga을 3.75 원자층를 (ML) 조사하여 Ga drop을 형성하였다. Ga drop을 GaAs 나노구조로 결정화시키기 위하여 $As_4$를 beam equivalent pressure (BEP) 기준으로 $1{\times}10^{-4}$ Torr로 기판온도 $150^{\circ}C$에서 조사하였다. 결정화 직후 RHEED로 육각구조의 회절 페턴을 관측하여 결정화를 확인하였다. GaAs 나노 구조를 성장한 후 AlGaAs 장벽층을 성장하기위해 10 nm AlGaAs layer는 MEE 방법을 이용하여 $150^{\circ}C$에서 저온 성장 하였으며, 저온성장 후 기판온도를 $580^{\circ}C$로 설정하여 80 nm의 AlGaAs 층을 성장하고 최종적으로 GaAs 10 nm를 capping layer로 성장하였다. 저온성장 과정에서의 결정성의 저하를 보상하기위하여 MBE 챔버내에서 $650^{\circ}C$에서 열처리를 수행하였다. GaAs/AlGaAs 양자점의 광학적 특성은 photoluminescence를 이용하여 평가 하였으며 780 nm 근처에서 발광을 보여 주었다. 특히 PR 실험으로부터 시료의 전기장에 의한 Franz-Keldysh oscillation (FKO)의 변화를 관측하여 GaAs/AlGaAs 양자점의 존재에 의한 시료의 표면에 형성되는 표면전기장을 측정하였다. 또한 시료에 형성된 전기장의 세기를 계산하기위해 PR 신호로부터 fast Fourier transformation (FFT)을 이용하였다. 특히 온도의 존성실험을 통하여 표면전기장의 변화를 관측 하였으며 양자구속효과와 관련성에 대하여 고찰 하였다.