• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 연약지반처리위원회 학술세미나
• /
• pp.71-78
• /
• 2000

SHANSEP method involves the consolidation to stresses in excess of the preconsolidation pressure in order to overcome sample disturbance effect. The concept of SHANSEP is based on an approach to laboratory test which attempts to reproduce the in-situ conditions more closely than is possible in routine tests and evaluates normalized strength parameters for the soil as a function of OCR. But SHANSEP method can be applied only to fairly uniform clay deposits, and is unsuitable for a random deposit. In this study, CK/sub o/U triaxial compression test and incremental loading consolidation test were performed for the application of SHANSEP method on Yangsan clay. During the K/sub o/-consolidation, triaxial specimens were consolidated to stress equal to two times the in-situ vertical effective stress. And for overconsolidated condition, the specimens were swelled to a known vertical effective stress in order to have the desired OCR. With the results of CK/sub o/U triaxial compression test using the block samples, the relationship between c/sub u//σ/sub vc/' and OCR on Yangsan clay was established. For evaluating the undrained shear strength of Yangsan clay with depth, CK/sub o/U triaxial compression test was performed using the piston samples taken from Yangsan site. And also undrained shear strength was analyzed from the in-situ test such as Cone Penetration Test(CPT), Dilatometer Test(DMT), and Field Vane Test(FVT) and was compared with that of CK/sub o/U triaxial compression test.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.639-646
• /
• 2000

It is important to estimate the mechanical properties of clay since it is directly related to the design and the construction of geotechnical structures. Site exploration, which is composed of boring, sampling, in-situ, or laboratory tests, is preformed to estimate the mechanical properties. However, mechanical properties of clay measured from laboratory test may be different from in-situ properties due to disturbances occurred during sampling, transportation, storage, and trimming. In this study, the degree of disturbance according to sampling method was estimated with the test results of CK/sub o/U triaxial compression test on Yangsan clay. The soil samples were obtained by three types of sampling method, j.e., 76mm-tube sampler, 76mm-piston sampler, and block sampler. In order to evaluate the quality of samples, volumetric strain, undrained shear strength, secant Young's modulus, and pore pressure coefficient at peak measured from each sample were compared with one another. From the test results, it was observed that mechanical properties of the block and piston samples were more reliable than those of tube samples. But it was observed that the water content of piston was similar to that of tube samples at given depths while the water content of block samples was 14.3∼15.8% smaller than that of piston and tube samples. In addition to the evaluation of the quality of samples, relationship between c/sub u// σ/sub vc/'and OCR was established from the results of the CK/sub o/U triaxial compression tests, which were carried out using SHANSEP method. And also undrained shear strength was analyzed using the in-situ test data such as Cone Penetration Test(CPT), Dilatometer Test(DMT), and Field Vane Test(FVT) and was compared with that evaluated from CK/sub o/U triaxial compression test.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.383-389
• /
• 1999

This paper is a study on the improvement effects by quick lime pile through theoretical analysis and in-situ construction test. Effects of strength increase is studied to verify the improvement effects of soft ground arounding quick lime pile. First, engineering characteristics of quick lime and ground was studied, in the second place, laboratory test(consolidation test, triaxial compression test) and in-situ test(portable cone penetration test, vane test) were peformed for verification of strength increase of adjacent ground. Finally, the results of in-situ test were compared with those of theorecal study. From in-situ test results, strength at 28th curing days(6.11-6.55t/㎡) was twice as great as strength before improvement(3.06t/㎡) and was slightly greater than theoretical value(4.95t/㎡).

• Geomechanics and Engineering
• /
• 제32권1호
• /
• pp.49-68
• /
• 2023

The three-dimensional failure criterion is essential for maintaining wellbore stability and sand production problem. The convenient factor for a stable wellbore is mud weight and borehole orientation, i.e., mud window design and selection of borehole trajectory. This study proposes a new three-dimensional failure criterion with linear relation of three in-situ principal stresses. The number of failure criteria executed to understand the phenomenon of rock failure under in-situ stresses is the Mohr-Coulomb criterion, Hoek-Brown criterion, Mogi-Coulomb criterion, and many more. A new failure criterion is the extended Mohr-Coulomb failure criterion with the influence of intermediate principal stress (σ₂). The influence of intermediate principal stress is considered as a weighting of (σ₂) on the mean effective stress. The triaxial compression test data for eleven rock types are taken from the literature for calibration of material constant and validation of failure prediction. The predictions on rock samples using new criteria are the best fit with the triaxial compression test data points. Here, Drucker-Prager and the Mogi-Coulomb criterion are also implemented to predict the failure for eleven different rock types. It has been observed that the Drucker-Prager criterion gave over prediction of rock failure. On the contrary, the Mogi-Coulomb criterion gave an equally good prediction of rock failure as our proposed new 3D failure criterion. Based on the yield surface of a new 3D linear criterion it gave the safest prediction for the failure of the rock. A new linear failure criterion is recommended for the unique solution as a linear relation of the principal stresses rather than the dual solution by the Mogi-Coulomb criterion.

• Geomechanics and Engineering
• /
• 제25권3호
• /
• pp.253-266
• /
• 2021

In this paper, we discuss a mathematical method for determining the return energy of the wave from the sample and comparing it with the mechanical energy consumed to change the dimension of the sample in the triaxial test of the rock. We represent a method to determine the mechanical energy and then we provide how to calculate the return energy of the wave. However, the static energy and pulse return energy will show higher amounts with axial pressure increase. Three types of clastic sedimentary rocks including sandstone, pyroclastic rock, and argillitic tuff were selected. The sandstone showed the highest strength, Young's modulus and ultrasonic P and S waves' velocities versus others in the triaxial test. Also, from the received P wavelet, the calculated pulse wave returning energy indicated the best correlation between axial stress compared to wave velocities in all specimens. The fact that the return energy decreases or increases is related to increasing lateral stress and depends on the geological characteristics of the rock. This method can be used to determine the stresses on the rock as well as its in-situ modulus in projects that are located at high depths of the earth.

• 한국지반공학회지:지반
• /
• 제12권5호
• /
• pp.63-78
• /
• 1996

퇴적연암의 변형특성을 조사하기 위하여 여러 종류의 실내시험과 원위치시험결과를 비교검토 하였다. 초음파측정시험 등의 실내시험에서 불구속 시료의 탄성계수는 원위치유효토피압에 해당하는 압밀구속압으로 구속한 시료의 탄성계수 보다 현저히 작았다. 또 삼축압축시험에서 재하피 스톤의 축변위로 부터 구한 축변형률은 시료 상.하단에서의 오차(bedding error)로 인하여 정확히 측정할 수 없고, 전체적으로 신뢰할 수 없다. 따라서 시료측면에서 직접 변형률을 측정하는 국소변형측정장치를 이용하여 0.001% 이하에서 약 1%까지 연속적으로 위와 같은 오차를 제거한 축변형률을 얻을 수 있었고, 0.00% 이하 축변형률에서 정의된 탄성계수 Emax는 원위치탄성 파속도시험으로 얻어진 탄성계수 Er와 거의 일치하였다. 변형률이 0.01%에 도달하기 이전에 변형은 비선형성을 보이기 시작하고, 실제 원위치 작용하중 범위에서 예상할 수 있는 최대변형률 0.1%에서의 할선탄성계수 Esec는 Emax의 1/2보다 여전히 큰 값을 보인다. 위와 같은 내용을 골자로 하여 정밀측정실내시험 결과에 따른 변형특성과 현장거동 및 원위치측정결과의 비교검토를 통해 변형률레벨을 고려한 원위치 탄성계수 추정법을 제안하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1188-1191
• /
• 2009

In this study, cyclic triaxial tests were performed with the samples which were anisotropically consolidated using irregular earthquake loading to consider in-situ condition and seismic wave. The consolidation pressure ratio(K) was changed from 0.5 to 1.0. The Ofunato and Hachinohe wave are applied as irregular earthquake loading and liquefaction resistance strength was estimated from excess pore water pressure(EPWP) ratio. As results of the cyclic triaxial tests, buildup of EPWP ratio increased as K value increased. It shows, that the isotropically consolidated sands is more susceptible to liquefaction than anisotropically consolidated sands under equal conditions such as confining pressure and dynamic loading.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1039-1046
• /
• 2005

After clay particles have been sediment isotropically, the clay deposits have been consolidated under $K_0$-stress system. Therefore, in order to predict the behavior in-situ of normally consolidated clays, the laboratory test should be enforced under $K_0$-stress system and should obtain the characteristics of normally consolidated clays. And relationship of stress-strain on clay is effected on not only method of consolidation but also characteristic of visco-plastic behavior. Saturated clay is effected more this trend. So, rate of strain is considered to understand exact stress-strain relationship. In this study, the series of undrained triaxial compression tests were preformed on remolded specimens which was made by slurry of clay, consolidated under $K_0$-stress systems. And the undrained triaxial compression test were preformed to examine behavior of stress-strain relationship due to rate of shear strain relationship due to rate of shear strain.

• 지질공학
• /
• 제10권3호
• /
• pp.225-236
• /
• 2000

웨스터리 화강암과 베리아 사암 시료에 지하 심부에 상당하는 현장 응력을 가한 후 시추를 함으로써 시추공벽 파쇄를 발생시켰으며, 이를 통하여 현장 응력의 크기를 추정할 수 있는지 연구하였다. 실험은 삼축압축 및 시추공벽 파쇄시험 등 두 단계로 나뉘어 수행되었다. 삼축압축 시험 결과로부터 모아-쿨롱, 나다이, 그리고 모기파괴 기준을 구하였다. 각 파괴 기준을 공벽 파쇄 경계 지점에서의 응력 상태와 비교한 결과, 모아-쿨공 파괴 기준은 공벽에서의 파쇄 응력과는 전혀 일치하지 않았다. 반면, 베리아 사암에서는 나다이기준, 그리고 웨스터리 화강암에서는 모기파괴 기준과 같은 다축(혹은 진 삼축) 파괴 기준이 공벽 주변에서 파쇄를 일으키는 응력 상태와 잘 일치하였다. 적당한 파괴 기준 및 시추공벽 파쇄 크기를 이용하여 두 개의 현장 수평 주응력 중 하나가 알려졌을 경우 다른 하나를 비교적 신뢰할 수 있는 정도로 추정할 수 있다는 것이 밝혀졌다.

• 한국지반공학회논문집
• /
• 제19권1호
• /
• pp.93-102
• /
• 2003

일축압축시험은 방법이 비교적 간단하고 경제적이기 때문에 점토지반의 비배수 전단강도($c_u$)를 결정하는데 널리 사용되고 있다. 하지만, 구속압이 없는 상태에서 시험이 시행되기 때문에 지중응력 조건을 재현할 수 없고, 또한 삼축압축시험에 의한 강도보다 과소평가 되는 경우가 많다. 따라서, $c_u$를 시료교란에 대해 보정하여 실무에서 간단히 사용할 수 있는 강도 보정법이 요구된다. 본 연구에서는 흡수력 측정을 겸한 일축압축시험 만으로 원지반의 비배수 전단강도(이하, 원지반 강도)를 추정할 수 있는 방법을 제시하고자 한다. 제안된 방법은 완전시료의 이론적 전단강도식(Noorany와 Seed, 1965)을 기본으로 하며, 유효토피압과 일축압축시험의 유효응력거동 분석 결과( $A_f,\phi'$)를 필요로 한다. 특히, 전단저항각($\phi'$)은 일축압축시험의 수정파괴포락선($K_f$) 기울기가 삼축압축시험에 비해 약 1.6배정도 더 크게 평가된다는 시험결과를 근거로 하여 간단히 유추할 수 있다. 연구 결과, 제안된 방법에 의해 추정된 원지반 강도는 삼축압축시험(CK$_0$UC)의 비배수 전단강도와 유사한 값을 나타냈다.