• 공업화학
• /
• 제10권1호
• /
• pp.148-153
• /
• 1999

2-bromoterephthaloyl chloride와 1,4-bis(p-hydroxybenzoyloxy)butane을 PMMA 용액내에서 중축합시켜 in situ 복합재료를 제조하였다. 이들의 합성확인 및 열적, 기계적 성질은 FT-IR, FT-NMR, DSC와 DMTA에 의해서, 몰폴로지는 광학현미경과 SEM을 사용하여 조사하였다. 합성된 TLCP는 네마틱상을 보였고, 복합재료내 PMMA의 유리전이온도와 기계적 성질은 TLCP의 농도증가와 함께 증가하였다. TLCP domain은 PMMA 매트릭스내에서 미세 분산되었음을 확인하였고 in situ 중합에 의해 제조된 20 wt % TLCP/PMMA 복합재료는 같은 조성의 용액 블렌딩에 의해서 제조된 재료보다 더 높은 기계적 강도와 미세 분산도를 보였다.

• 한국수소및신에너지학회논문집
• /
• 제26권1호
• /
• pp.15-20
• /
• 2015

During the liquefaction of hydrogen, the ortho hydrogen is converted into the para form with heat release that evaporates the liquefied hydrogen into the gaseous one backwards. The ortho-para conversion catalysts are usually used during liquefaction to avoid such boil-off. In order to compare and analyze the performance of the ortho-para hydrogen conversion catalysts, in-situ FT-IR device was designed and manufactured to measure the para hydrogen conversion rate in real-time. $LaFeO_3$ and $La_{0.7}Sr_{0.3}Cu_{0.3}Fe_{0.7}O_3$ perovskite catalysts were prepared by the citrate sol-gel method and their spin conversion characteristics from ortho to para hydrogen were investigated by in-situ FTIR spectroscopy at 17K. It was found that the spin conversion was affected by surface area, particle size, and crystallite size of the catalysts. Thus, the $La_{0.7}Sr_{0.3}Cu_{0.3}Fe_{0.7}O_3$ perovskite catalyst that had higher surface area, higher crystallite size, and smaller particle size than $LaFeO_3$ showed the better spin conversion property of 32.3% at 17K in 120min interaction with the perovskite catalysts.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2007년도 제33회 하계학술대회 초록집
• /
• pp.295-295
• /
• 2007

• 대한화학회지
• /
• 제55권2호
• /
• pp.256-261
• /
• 2011

Bis acetylated hybrid pyrazoles 을 합성하여 이들 화합물에 대해 녹는점, 원소분석, MS, FT-IR, one-dimensional $^1H,-$ 및 $^{13}C$-NMR로 분석하였다. 합성한 화합물들에 대해 in vitro 항균활성을 Candida sp. namely Candida albicans, Candida glabrata, Candida parapsilosis, Candida dubliniensis 및 Candida tropicali 균에 대해 수행하였다. Pyrazoles의 페닐고리에 작용기($-CH_3$, $-OCH_3$, -F, -Cl, 및 Br)가 있는 화합물은 Candida species에 대해서 강한 활성을 나타내었다.

• Macromolecular Research
• /
• 제15권6호
• /
• pp.553-559
• /
• 2007

Nanocomposite films were prepared by sol-gel synthesis from vanadium triisopropoxide with $poly((oxyethylene)_9$ methacrylate)-graft-poly(dimethyl siloxane), POEM-g-PDMS, producing in situ growth of vanadium oxide within the continuous ion-conducting POEM domains of micro phase-separated graft copolymer. The formation of vanadium oxide was confirmed by wide angle x-ray scattering (WAXS) and Fourier transform infrared (FT-IR) spectroscopy. Small angle x-ray scattering (SAXS) revealed the spatially-selective incorporation of vanadium oxide in the POEM domains. Upon the incorporation of vanadium oxide, the domain periodicity of the graft copolymer monotonously increased from 17.2 to 21.0 nm at a vanadium content 14 v%, above which it remained almost invariant. The selective interaction of vanadium oxide with POEM was further verified by differential scanning calorimetry (DSC) and FT-IR spectroscopy. The nanocomposite films exhibited excellent mechanical properties $(l0^{-5}-10^{-7}dyne/cm^2)$, mostly due to the confinement of vanadium oxide in the POEM chains as well as the interfaces created by the microphase separation of the graft copolymer.

• 공업화학
• /
• 제26권1호
• /
• pp.40-46
• /
• 2015

카본나노튜브(CNT)와 폴리아닐린(PANI)과 같은 도전성물질의 서스펜션을 함유한 마이크로캡슐이 멜라민과 포름알데히드의 in situ 중합법에 의해 제조되었다. 평균직경 $10-20{\mu}m$의 안정된 마이크로캡슐이 관찰되었으며, 이 마이크로 캡슐의 표면 모폴로지와 화학구조, 열적특성을 광학현미경, 주사전자현미경(SEM), 적외선 분광분석(FT-IR), 열중량분석(TGA) 등으로 측정하였다. 테트라클로로에틸렌과 아이소파 G (isopar-G) 및 CNT나 PANI로 구성된 도전성물질 서스펜션을 함유한 마이크로캡슐의 전기전도도를 캡슐벽을 깨뜨린 후 측정하였다. 마이크로캡슐의 심물질인 CNT나 PANI의 양이 증가할수록 측정된 전류는 증가하였다. 분쇄된 캡슐의 심물질의 전도도를 측정한 결과는 CNT나 PANI가 캡슐이 깨졌을 때, 빠져나온 심물질인 전도성 물질이 단락된 서킷을 연결해 줄 수 있는, 자기치유형 전자재료 시스템에 폴리 멜라민 포름알데히드 베이스의 코어 쉘(core shell) 마이크로캡슐이 적용 가능한 것을 보여준다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.303-303
• /
• 2006

In-situ ring opening polymerization of ${\varepsilon}-caprolactum$ was carried out in the presence of aminoethylaminopropylisobutyl POSS and stoichiometric amount of adipic acid. The covalent bond formation of POSS on the polyamide was confirmed by the appearance of FT-IR peak at $1123\;cm^{-1}$ that corresponds to the Si-O stretching of POSS structures. Gradual decrease in melting endotherm peak was observed on loading POSS in PA6/POSS nanocomposites. Sharp increase in intrinsic viscosity was observed upto 2.5 wt % loading POSS in the polyamide 6 nanocomposites. These nanocomposites were further characterized using nuclear magnetic resonance, melt viscosity and X-ray diffraction.

• 센서학회지
• /
• 제17권5호
• /
• pp.325-328
• /
• 2008

This paper describes the electrical properties of poly (polycrystalline) 3C-SiC thin films with different nitrogen doping concentrations. In-situ doped poly 3C-SiC thin films were deposited by APCVD at $1200^{\circ}C$ using HMDS (hexamethyildisilane: $Si_2(CH_3)_6)$) as Si and C precursor, and $0{\sim}100$ sccm $N_2$ as the dopant source gas. The peak of SiC is appeared in poly 3C-SiC thin films grown on $SiO_2/Si$ substrates in XRD(X-ray diffraction) and FT-IR(Fourier transform infrared spectroscopy) analyses. The resistivity of poly 3C-SiC thin films decreased from $8.35{\Omega}{\cdot}cm$ with $N_2$ of 0 sccm to $0.014{\Omega}{\cdot}cm$ with 100 sccm. The carrier concentration of poly 3C-SiC films increased with doping from $3.0819{\times}10^{17}$ to $2.2994{\times}10^{19}cm^{-3}$ and their electronic mobilities increased from 2.433 to $29.299cm^2/V{\cdot}S$, respectively.

• 한국표면공학회지
• /
• 제34권3호
• /
• pp.258-263
• /
• 2001

Siloxane thin films were fabricated on a silicon wafer by spin-coating using a siloxane solution made by the sol-gel process. Fluorine was doped using$ CF_4$ plasma treatment. The film was then annealed in-situ state in the nitrogen atmosphere. In order to examine the influence of annealing and fluorine doping on the siloxane thin film, thermogravimetric-differential thermal analysis (TG-DTA), Fourier transform-infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) were used and the dielectric constant was determined by the high-frequency capacitance-voltage method. Stable siloxane films could be obtained by in-situ annealing in a nitrogen atmosphere after $CF_4$ plasma treatment, and the dielectric value of the film was $\varepsilon$ 2.5.

• 한국재료학회지
• /
• 제14권11호
• /
• pp.821-827
• /
• 2004

Titanium oxide thin films were prepared on Si(100) substrates by R.F. magnetron reactive sputtering at $30\sim200watt$ R.F power range, and annealed at $600^{\circ}C\sim800^{\circ}C$ for 1 hour. The properties of $TiO_2$ thin films were analyzed using x-ray, ${\alpha}-step$, ellipsometer, scanning electron microscopy, and FT-IR spectrometer. Upon in-situ depositions, the initial phase of $TiO_2$ thin film showed non-crystalline phase at R.F. power $30\sim100$ watt. The crosssection of $TiO_2$ thin films were sbserved to be the columnar structure. With the increasing R.F power and annealing temperature, the grain size, crystallinity, refractive index, and void size of titanium oxides showed a tended to increase. The FT-IR transmittance spectra of titanium oxide thin films have the obsorption band of Ti-O bond, Si-O bond, Si-O-Ti bond and O-H bond. With the increase of R.F. power and annealing temperature, these films have the stronger bond structures. It is considered that such a phenomena is due to phase transition and good crystallinity