• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.2
• /
• pp.99-107
• /
• 2009

This study produced a design curve and fatigue limit for a variation in volume ratio and reduction ratio of TiNi/Al composites. In many cases, stress-life curve does not indicate fatigue limit, so it was presented by probabilistic-stress-life curve. Goodman diagram was used to analyze the fatigue strength of materials with a finite life determined by repeated load and the fatigue strength of endurance limit with an infinite life. The fatigue experiment was conducted using the scenk-type plane bending specimen in same shape. The result of the fatigue test, which had been conducted under consistent stress amplitude, was examined. (i) The optimal condition for TiNi/Al in accordance with hot pressing (ii) Impacts of fatigue limit caused by a variation in reduction ratio and volume ratio of TiNi/Al composites (iii) Probability distribution for fatigue limit of TiNi/Al2024 and TiNi/Al6061.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.4
• /
• pp.263-270
• /
• 1993

A study on the variation of radiation stress and mean water level is carried out for the shoaling and breaking waves on a plane beach. In general, the radiation stresses computed based on the linear wave theory are overestimated. which results in the discrepancy between the computed results and laboratory data of mean water level in the surf zone. In this paper, by modifying the Svendsen's approach (1984), radiation stress is expressed in terms of water depth. The computed results are compared with the results calculated by a linear wave theory and Sawaragi's approach (1984) based on the spectrum of breaking wave components, and published laboratory data. The computed results of the modifed Svendsen's approach are favourably compared with the laboratory data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.2
• /
• pp.331-337
• /
• 1994

The scatting problem by E-polarized plane wave with obique incidence on a tapered resistive strip grating with zero resistivity(perfectly conducting) at strip-edges is analyzed by the method of moments in the spectral domain. Then the induced surface current density on the strip is expanded in a series of Chebyshev polynomials of the second kind. The expasion coefficients are calculated numerically in the spectral domain, the numerical results of the geometric-optical reflection coefficient for the tapered resistivity in this paper are compared with those for the existing uniform resistivity. And the position of sharp variation points in the magnitude of the geometric-optical reflection coefficient can be moved by varying the incident angle and the strip spacing, It is found out that these sparp variation points are due to the transition of higher mode between the propagation mode and the evanescent mode.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.148-149
• /
• 2008

As infrared light is radiated, the CMOS Readout IC (ROIC) for the microbolometer type infrared sensor detects voltage or current when the resistance value in the bolometer sensor varies. One of the serious problems in designing the ROIC is that resistances in the bolometer and reference resistor have process variation. This means that each pixel does not have the same resistance, causing serious fixed pattern noise problems in sensor operations. In this paper, Reference resistor compensation technique was proposed. This technique is to compensate the reference resistance considering the process variation, and it has the same reference resistance value as a bolometer cell resistance by using a comparator and a cross coupled latch.

• Resources Recycling
• /
• v.12 no.6
• /
• pp.32-37
• /
• 2003

For the reduction of electromagnetic biological effects from cellular phones, the electrical field radiation from cellular phone antenna is reduced by using partial ferrite material added on the phone case as ground plane. On the given properties (permittivity, permeability and conductivity) of ferrite material, the characteristics of monopole antenna is analysed depending on the variation of ferrite added configuration(thickness and shape). According to this analysis, the design method and direction to minimize the biological effects to human head is proposed in 1.7 GHz band PCS phones. For the exact analysis involving the permittivity, per-meability and conductivity of ferrite material, FDTD numerical method is used.

• The korean journal of orthodontics
• /
• v.18 no.1 s.25
• /
• pp.113-125
• /
• 1988

This study was attempted to individualize upper and lower incisor position appropriate to individual characteristic dento-facial pattern. Lateral cephalometric radiographs of 75 Korean adults with normal occlusion and good facial profile whose ages were over 17 years were traced, digitized, and statistically analysed. The results of this study were as follows; 1. All cephalometric measurements of incise. position and dento-facial pattern for normal occlusion showed wide range of variation. 2. There were no significant differences of incisor position between males and females. 3. Lower incisor position was highly correlated with ANB, N-A-Pog and SN/Mand. pl. angle and upper incisor position, with ANB, N-A-Pog and SN/Occ. pl. angle. 4. Multiple regression equations were established to individualize incisor position appropriate to individual characteristic dento-facial pattern. ANB and N-A-Pog angle were selected as the significant guiding variables affecting upper and lower incisor position. 5. Lower incisor position such as $\bar{1}$ to SN, $\bar{1}$ to occlusal plane and $\bar{1}$ to NPog(mm) and upper incisor position such as $\underline{1}$ to SN, $\underline{1}$ to palatal plane, $\underline{1}$ to NA, $\underline{1}$ to NA (mm) and $\underline{1}$ to NPog(mm) could highly predicted from the variables of dento-facial pattern.

• Steel and Composite Structures
• /
• v.43 no.6
• /
• pp.809-819
• /
• 2022

This paper proposes a method to predict the deflection of prestressed concrete (PC) beams with corrugated steel web (CSW) under constant load concerning time-dependent variation in concrete material. Over time, the top and bottom concrete slabs subjected to asymmetric compression experience shrinkage and creep deformations. Here, the classical Euler-Bernoulli beam theory assumption that the plane sections remain plane is not valid due to shear deformation of CSW. Therefore, this study presents a method based on the first-order shear deformation to find the long-term deflection of the composite beams under bending by considering time effects. Two experimental prestressed beams of this type were monitored under their self-weight over time, and the theoretical results were compared with those data. Additionally, 3D analytical models of the experimental beams were used according to material properties, and the results were compared with two previous cases. There was good consistency between the analytical and numerical results with low error, which increased by wave radius. It is concluded that the proposed method could reliably be used for design purposes.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.233-241
• /
• 2003

Geotextile tube is hydraulically filled with dredged materials and has been applied to coastal protection and scour protection, dewatering method of slurry, and isolation of contaminated material. Recently, geotextile tube technology is no longer alternative construction technique but suitable desired solution. In this paper, the numerical analysis was performed to investigate the behavior of geotextile tube with various properties of geotextile sheet and hydraulic pumping conditions. Numerical analysis was executed to compare with the results from the large-scale field model tests, and also with those of plane strain analysis and 3-D FEM analysis. A geotextile tube was modeled using the commercial finite element analysis program ABAQUS and the one-quarter of tube was modeled. Behavior of geotextile tube during the hydraulic pumping procedure was analyzed by comparing the large-scale field model test and numerical analysis. The shape variation and maximum tube height between the numerical analysis results and large-scale filed test results are turned out to be in a good agreement.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.3 s.21
• /
• pp.115-122
• /
• 2002

The mainly used technique to rectify satellite images with distortion is to develop a mathematical relationship between the pixel coordinates on the image and the corresponding points on the ground. By defining the relationship between two coordinate systems, a polynomial model is designed and various linear transformations are used. These GCP based geometric correction has performed overall plane to plane mapping. In the overall plane mapping, overall structure of a scene is considered, but local variation is discarded. The highly variant height of region is resampled with distortion in the rectified image. To solve this problem, this paper proposed the TIN-based rectification on a satellite image. The TIN based rectification is good to correct local distortion, but insufficient to reflect overall structure of one scene. So, this paper shows the experimental result and the analysis of each rectification model. It also describes the relationship GCP distribution and rectification model. We can choose a geometric correction model as the structural characteristic of a satellite image and the acquired GCP distribution.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.11a
• /
• pp.217-221
• /
• 2008

The goal of this research is to analyze interrelationship for layout of dwelling house and variation of its side plane by introducing concept of space in order to address as to how Korean traditional houses had been formed and varied in the middle of advancing modern city. In addition, this paper also has its meaning in a way that it identified how Korean traditional houses have been changed, and thus make residents more comfortable to live there by reviving their past characteristics, and make users have traditional food culture. Targeted area for this paper is limited to south-eastern area of Daegu such as Namsanjung, Myeongchijung, Sijangjung, Shinjung and Dalsungjng which was group dwelling houses of people of Chosun Dynasty during Japanese colonial rule' era ($1910{\sim}1945$). Among those places, the paper has chosen a place where Korea traditional houses were well preserved, variation of road and fields was less 1930s, and residential type is easy to effectively compared. As the result of this research, time when traditional cities were changed into new type of city residential area is believed to be around 1930s, and traditional residential area, through its transitional process, is believed to be changed to modern residential area. It also indicates that change of organizational road and fields directly had influence on change of houses.