• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.2871-2882
• /
• 1994

Two kinds of 4-node plane stress/strain finite elements are presented in this work. They are derived from the modified Hellinger-Reissner variational principle so as to employ the internal incompatible displacement and independent stress fields, or the incompatible displacement and strain fields. The introduced incompatible functions are selected to satisfy the constant strain condition. The elements are evaluated on several problems of bending and material incompressibility with regular and distorted elements. The results show that the new elements perform excellently in the calculation of deformation and stresses.

• 대한기계학회논문집
• /
• 제13권2호
• /
• pp.243-251
• /
• 1989

본 연구에서는 균질재료에 대하여 Vitec, Riedel, Yokobori와 Kamei 등이 사용되었던 모델을 계면균열문제에 도입하였다. 즉, 균열선단에 기울어진 슬립면 (Slip plane)을 가정하고 소성역이 이 슬립면 상에 존재한다고 가정하여 이 모델에 모우드 III의 응력이 작용하는 경우에 대하여 해석하였다.소성여과 균열을 전위 (dislocation)의 연속된 분포로 나타내고 평형조건을 만족하는 전위밀도함수(disl- ocation density function)를 구하였다.이러한 모델의 해석을 통하여 각 재료에서의 의 마찰전단응력의 변화에 따른 소성역의 크기 및 균열선단에서의 상대변위의 변화를 살펴보았다. 또한 이러한 소성역을 가정한 경우의 J-적분과 균열선단에서의 상대 변위와의 관계에 대해서도 살펴보았다.

• 대한치과교정학회지
• /
• 제10권1호
• /
• pp.29-36
• /
• 1980

Inclined plane, one of frequently used orthodontic appliances, may cause posterior displacement of mandible and injure the normal growth of temporomandibular joint. So author carried out the mandibular posterior displacement experimentally induced by inserting inclined plane in the rat incisors in order to investigate the histological reactions occuring in the temporomandibular joint of experimental animals. Following results were obtained. 1. The posterior displacement of condyle resulted in the widening of anterior synovial space with anterior condylar hyperplasia and posterior condylar atrophy. In addition, tissue changes were more severe in young rats than in adult rats. 2. The tissue reactions were localized only to condylar head ana there were no evidence of traumatic features in young rats. In adult rats, hemorrhage was an additional finding 1 week after experiment. 3. The remodelling processes were accompanied by the increasing or reduction of fibrous layer and subsequent replacement by cartilage layer occured massively and abruptly in young rats, it occured slightly and slowly in adult rats. 4. The remodelling process of injured condyle occured from 1 week to 4 weeks after experiment and completed between 8 weeks after experiment.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제1권1호
• /
• pp.65-74
• /
• 1997

For two dimensional elasticity, we suggest a new complex variable method using the Navier's displacement equation. This method gives alternative displacement and stress formulae to those resulting from the Muskhelishvili's complex function method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.61-67
• /
• 1997

The electronic speckle pattern interferometer (ESPI) has been applied to many technical problems such as deformation and displacement measurement, strain visualization and surface roughness monitoring. In this study, we used an ESPI system based on the dual beam speckle interferometer method in order to measure in-plane displacement and vibration mode using the ESIP technique. This research was carried out for the purpose of applying the vibration analysis method employing Electro-Optic holographic interference technique to the vibration analysis of uniform rectangular cantilevers plate(SS400,STS304) with cantilevers span to breadth ratio of 150 by 75. And thickness of 1mm and 0.8mm respectively. We improved the ESPI technique in order to obtain the distribution of displacement component resolved in one direction through a CCD camera combined with an image processing system. To certify and to assess the accuracy in measuring by this ESPI, the results obtained with the speckle method and vibration mode analysis are to be compared with those results by Warbuton's Theoretical expression and vibration made in FEM analysis.

• 한국정밀공학회지
• /
• 제11권5호
• /
• pp.161-170
• /
• 1994

This paper presents the performance and problems in analysis method and testing system of Electronic Speckle Pattern Interfermetry(ESPI) method, in measuring two-dimensional in- plane displacement. The analysis result of measurement by ESPI is quite comparable to that of measurement by strain gauge method. This implieds that the method of ESPI is a very effective tool in non-contact two-dimensional in-plane strain analysis. But there is a controversial point, measurement error. This error is discussed to be affected not by ESPI method itself, but by its analysis scheme of the interference fringe, where the first-order interpolation has been applied to the points of strain measured. Further development of advanced first-order interpolation method is being undertaken for the more precise in-plane strain measurement.

• Structural Engineering and Mechanics
• /
• 제33권2호
• /
• pp.159-177
• /
• 2009

The aim of this paper is to give a rigorous framework for the interpretation of limit analysis results including large displacements. The presentation is oriented towards unidimensional media (beams) but two-dimensional (plates) or three-dimensional media are also concerned. A single-degree-of-freedom system is first considered: it shows the basic phenomena of large displacement limit analysis or second-order limit analysis. The results are compared to those of a continuous system and the differences between both systems are discussed. Theoretical results are obtained using the kinematical approach of limit analysis. An admissible load-displacement plane is then defined, according to the yield design theory. The methodology used is applied to frame structures. The presented results are nevertheless different from those already published in the literature, as the virtual displacement field can be distinguished from the displacement field at collapse. The simplicity of large displacement limit analysis makes it attractive for practical engineering applications. The load-displacement upper bound can be used for instance in the optimal design of steel frames in seismic areas.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.121-129
• /
• 1998

In-plane ESPI(Electronic Speckle Pattern Interferometry) was devised to measure in-plane deformations and rotation of a specimen with laser in this study. ESPI is a optical measuring method to be able to measure the deformations of engineering components and materials in industrial fields. The conventional measuring methods of surface deformations such as the strain gauge have many demerits because they are contact and point-to-point measuring ones. But that ESPI is noncontact, nondestructive and whole field measuring method can overcome previous disadvantages. We used ESPI which is sensitive to in-plane displacement for measuring in-plane deformations of a disk. And the 4-frame phase shifting method was used for the quantitative analysis. First of all, the system calibration was done due to an in-plane rotation before getting deformations of a disk. Finally we showed good agreement between the experiment results and those of the FEA(Finite Element Analysis).

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.474-478
• /
• 1992

The non-rational transfer function of a Bernoulli-Euler beam, as an important component of a flexible structure, is analyzed. The true pattern of zeros of that transfer function is investigated as a function of sensor and actuator seperation. Translational displacement sensors are used for two cases in which a force input and a moment input are seperately applied. When the displacement sensor is located at a certain point, the first pair of zeros on the real axis of the s-plane arrive at the origin and cancel the rigid-body mode. The location of the translational displacement sensors on the beamat which the rigid-body mode of the beam is unobservable is analyzed as the center of percussion and is uniquely located for each case. If sensor is moved beyond such a point, a pair of zeros appear on the imaginary axis and move away from the origin along the imaginary axis of the s-plane.

• 대한기계학회논문집A
• /
• 제36권9호
• /
• pp.985-996
• /
• 2012

면외 기계적하중과 면내 전기적하중을 받는 압전재료에서 비정상적으로 전파하는 전기투과형 균열에 대하여 연구하였다. 비정상적으로 전파하는 균열에 대한 평형방정식을 개발하였고 근접해법으로 투과형균열에 대한 응력장 및 변위장을 얻었다. 압전상수, 유전율 그리고 균열선단속도 및 응력확대계수의 시간 변화율이 비정상적으로 전파하는 균열선단부근의 응력 및 변위장에 미치는 영향을 명확히 나타내었다. 이러한 응력장과 변위장을 사용하여 비정상적으로 전파하는 균열선단의 응력장 및 변위장의 특성에 대하여 토론하였다.