• 제목/요약/키워드: In-house Design Department

검색결과 286건 처리시간 0.032초

농어촌 주택 표준모델의 냉난방에너지요구량 분석 (Heating and Cooling Energy Demand Analysis of Standard Rural House Models)

  • 이찬규;김우태
    • 한국산학기술학회논문지
    • /
    • 제13권8호
    • /
    • pp.3307-3314
    • /
    • 2012
  • 농어촌 주택 표준모델에 대한 연간 건물에너지요구량을 DesignBuilder를 사용하여 계산하였다. 실내설정온도, 외벽의 열관류율, 창호타입, 환기량을 변화시키며 건물의 설계/운영 변수들이 에너지요구량에 미치는 영향을 분석하였다. 건물의 크기와 상관없이 난방에너지요구량이 냉방에너지요구량보다 더 큰 것으로 나타났다. 단열재 두께를 증가시켜 외벽의 열관류율을 감소시키면 단열효과의 증가로 난방에너지요구량은 감소하지만 냉방에너지요구량이 증가한다. 하지만 외벽의 열관류율 조절을 통한 난방에너지요구량의 절감에는 한계가 있으므로 외부에 직접 노출된 외벽의 면적을 최소화하는 것이 더 효과적인 것으로 판단된다. 계산에 사용된 4가지 창호 중 일반 이중창호가 난방에너지요구량 측면에서 가장 유리한 것으로 나타났다. 침기량은 일정하게 유지하고 단위시간당 환기량을 증가시킨 경우 냉방에너지요구량은 큰 변화가 없었으나 난방에너지요구량이 증가하였다. 실내의 공기질이 만족되는 범위 내에서 환기량을 최소화하는 것이 연간 건물에너지요구량을 줄이는데 유리한 것으로 판단된다.

주거건축에서의 탄소저감을 위한 기법 분석 (Analysis of Techniques for Carbon Reduction in Residential Construction)

  • 김민수;이태구
    • 한국농촌건축학회논문집
    • /
    • 제26권2호
    • /
    • pp.9-16
    • /
    • 2024
  • In order to achieve carbon neutrality in the architectural field by 2050, this study analyzed the energy impact proportional to CO2 emissions of each technique, such as design methods, the properties of building structures, prefabrication methods, passive houses, and active facilities. In addition, the results were presented quantitatively in terms of carbon reduction, and corresponding housing cases were analyzed. The research method is limited to residential buildings at the Passive House energy level, and carbon reduction techniques and elements in architecture are examined through various literature and materials, and empirical cases are analyzed to determine the specific possibility of realizing carbon reduction in architecture. We want to secure it. Based on these analysis results, it was possible to suggest that it is possible to explore various approaches to carbon reduction in future residential construction. By combining the most efficient techniques according to the energy reduction level or goal setting of the building in question, we expect the possibility of achieving the goal of carbon reduction in the residential sector more realistically.

한국형 중목구조 주택 표준화 개발을 위한 목조주택의 디자인 특성 분석 (The Analysis of the Design Characteristics of Wooden Houses in order to Develop Korean Modern Wooden Houses)

  • Lee, Jusuk
    • 한국재난정보학회 논문집
    • /
    • 제13권4호
    • /
    • pp.537-549
    • /
    • 2017
  • 목조주택은 전통한옥, 현대한옥, 경골목구조, 중목구조 등으로 분류된다. 최근 국내에서 가장많이 건축되고 있는 경골목구조는 외국의 문화이며 전통한옥인 우리문화와 서로 잘 조화롭지 못하여 본 연구에서는 이러한 문제점을 개선하기 위해서 한옥과 현대 목조주택의 디자인 특성에 대해서 분석하고자 한다. 분석한 디자인 특성은 우리나라 한국적 목조 양식과 생활양식에 맞는 미래의 목조 건축의 발전에 크게 기여할 것으로 생각된다. 연구는 공간분석, 평면분석, 구조 시스템 분석, 지붕의 형태 분석, 미학적 분석 등으로 이루어진다. 전통한옥과 현대에 대한 디자인 특성을 분석한 결과로부터 한국형 중목구조 주택의 내외부의 모습과 모듈화요소를 제안하고 평면설계 및 지붕 벽체상세의 개발방향을 제안하였다.

정강도를 고려한 상부 컨트롤 암의 구조설계 (Structural Design of an Upper Control Arm, Considering Static Strength)

  • 송병철;박한석;권영민;김성환;박영철;이권희
    • 한국자동차공학회논문집
    • /
    • 제17권1호
    • /
    • pp.190-196
    • /
    • 2009
  • This study proposes a structural design method for the upper control arm installed at the rear side of a SUV. The weight of control arm can be reduced by applying the design and material technologies. In this research, the former includes optimization technology, and the latter the technologies for selecting aluminum as a steel-substitute material. Strength assessment is the most important design criterion in the structural design of a control arm. At the proto design stage of a new control arm, FE (finite element) analysis is often utilized to predict its strength. This study considers the static strength in the optimization process. The inertia relief method for FE analysis is utilized to simulate the static loading conditions. According to the classification of structural optimization, the structural design of a control arm is included in the category of shape optimization. In this study, the kriging interpolation method is adopted to obtain the minimum weight satisfying the strength constraint. Optimum designs are obtained by ANSYS WORKBENCH and the in-house program, EXCEL-kriging program. The optimum results determined from the in-house program are compared with those of ANSYS WORKBENCH.

A study on CFRP based lightweight House deck structure design and configuration of Deck body connected IoT sensor data acquisition devices

  • Jaesang Cha;Chang-Jun Ahn;Quoc Cuong Nguyen;Yunsik Lim;Hyejeong Cho;Seung Youn Yang;Juphil Cho
    • International Journal of Internet, Broadcasting and Communication
    • /
    • 제15권4호
    • /
    • pp.250-260
    • /
    • 2023
  • In this paper, we designed a IoT(Internet of Things) sensor block embedded lightweight house deck structures that can be implemented using Carbon Fiber Reinforced Polymer(CFRP). Deck-Sensor interconnection interface block via IoT connectivity Hub that can mount external environmental sensors such as fire sensors on the Deck body itself was also proposed. Additionally we described the configuration of devices for data acquisition and analysis based on IoT environmental detection sensors that can be commonly installed and used on these deck bodies. On the other hand, received sensing data based monitoring user interface(UI) also developed and used for sensing data analysis for remote monitoring center. Through the implementation of such IoT-based sensor data transmission and collection analysis devices and UI software, this paper confirmed the availability of CFRP based lightweight House deck structure and possibility of CFRP deck-based IoT sensor data networking and analysis functions.

실내공간에 있어서 식물 이용 방법과 선호도 분석에 관한 연구 (A Study on the Method of Using Plants and Preference Analysis for Interior Space)

  • 김태환;한승원
    • 한국실내디자인학회논문집
    • /
    • 제11호
    • /
    • pp.31-37
    • /
    • 1997
  • This study intens to provide available guideline of useful plants in interior and be used by designer. It focuses on evaluating the character of plants, the method of installation and the form of composition for suitable design of using plants. The study finds out that using plants in interior are necessary positively by 94% respondents. And results of factor analysis are that plants are needed for emothional stability(factor 1), visual charming(factor 2), and educational effection(factor 3). According to job, the group of students is visual charming (P=0.0037), the public servants and housewives is educational effection(p=0.0029). The most available space of plants as follows : Department(30.5%), Hotell(26.3%), House and Restuarant(12.7%). It has been identified that the public institution and commercial space are much indused plants. The most indused plants in house is ordered that the veranda, the living room, the entrance. This result is concerned about relation of natural light plants. The repondants reply that the favorite arrangement style is the corner form(63%), the center garden form(52.1%), the large planter(19.7%), the planter box(11.3%). They respond that they are more favorite light green color than dark, and mono color than mixture color. Finally, interior Designers should be understood the functional and aesthetic elements and the special interest about plants for developing desigv.

  • PDF

모의 실험주택 모니터링 결과를 활용한 실내공기 및 바닥먼지 중 Di(2-ethyl-hexyl) phthalate (DEHP)의 이론적 총량 비율 산출 (Calculation of the Theoretical Total Amount Ratio of Di(2-ethyl-hexyl) Phthalate in Indoor Air and Floor Dust in a Test House)

  • 천사호;이가원;김승중;정승표;강다영;김기태
    • 한국환경보건학회지
    • /
    • 제49권6호
    • /
    • pp.324-333
    • /
    • 2023
  • Background: Human exposure to phthalates in indoor environments occurs via dermal absorption, oral ingestion of indoor dust, and inhalation of indoor air. However, systematic studies to investigate the exposure rate to phthalates among the three exposure routes in indoor environments are currently limited. Objectives: A theoretical exposure ratio between inhalation and oral exposure was calculated based on the total amount of di(2-ethyl-hexyl) phthalate (DEHP) emitted into indoor air and deposited into floor dust in a test house. Methods: Flooring and wallpaper containing DEHP were installed in a test house and the concentration of DEHP in both indoor air and floor dust were monitored for five months. Based on the measured DEHP concentrations, the theoretical total amount ratio of DEHP that could be exposed through inhalation and oral ingestion was calculated. Results: Considering the period of operation in the test house, the theoretical total amount of DEHP through inhalation and oral ingestion exposures in the entire test house space was calculated to be 0.014 mg and 5.5 mg, respectively. The exposure ratio of the two routes between inhalation and oral exposure corresponding to the total DEHP amount in flooring and wallpaper was 6.0×10-7% and 2.3×10-4%, indicating that theoretical oral exposure to DEHP is approximately 380 times higher than inhalation. Conclusions: Monitoring results from a test house has shown that oral exposure is the main exposure route for DEHP in indoor environments. The experimental design employed in this study and theoretical exposure ratio obtained can be applied to investigate actual exposure to DEHP and to determine the exposure characteristics of various types of semi-volatile organic compounds.

복수정을 이용한 개방형 지열 시스템의 초기투자비 회수기간 분석 (Analysis of the Initial Cost Payback Period on the Open-loop Geothermal System Using Two Wells)

  • 조정흠;남유진
    • 설비공학논문집
    • /
    • 제29권3호
    • /
    • pp.119-126
    • /
    • 2017
  • Recently, ground source heat pump systems are being used in buildings for cooling and heating to reduce greenhouse gas and save energy. However, ground source heat pump systems mainly use the vertical closed-loop geothermal system design rather than the open-loop geothermal system design. This is due to a lack of knowledge and few research feasibility studies. In this research, a dynamic thermal analysis numerical simulation based on a standard house model was conducted for an open-loop geothermal system. Based on heating load analysis results, the life cycle costs of a standard house using an open two-well geothermal system were analyzed and compared with a vertical closed-loop geothermal system, and a diesel boiler. As a result, it was found that using an open two-well geothermal system shows economic return on investment after three years.

아파트 발코니 확장에 따른 전용공간의 변화에 관한 연구 - 전용면적 85m2형 공동주택을 대상으로 - (A Study on the Change of Exclusive Space for Balcony Expansion in an Apartment - Focused on an Apartment House below 85m2 of Exclusive Area-)

  • 배동식
    • 한국농촌건축학회논문집
    • /
    • 제20권2호
    • /
    • pp.11-18
    • /
    • 2018
  • The purpose of this study is to analyze the structure and use change of the private space according to the balcony expansion and use it as the data of plan design. According to Bay, front length/width ratio and the change of balcony space before and after expansion of space organization of house units were analyzed. Common characteristics of Flat type and Tower type are an increase of the frontage length of house units in an apartment, an increase of the number of front bay, and an increase of integrated LDK focusing on living room. A difference is that Flat type shows high frontage ratio, Bay figure, and spatial arrangement favorable to front openness and lighting. Flat type shows higher area distribution than Tower type in LDK area distribution located in at the plane center. Spatial expandability and visual openness of Flat type are more beneficial than those of Tower type in the planning, and a balcony extension of house units has developed to direction to open more. Tower type creates various block images through a combination of house units focusing on the core. Uses after balcony expansion are area expansion of a balcony-neighboring room, storage space, expansion and function improvement of the variable range, and specialized space different from a neighboring room. In addition, there is no escapable space except for a shelter, so unit plan should be prepared to prevent using it other space of a shelter and to solve moving line of two-way horizontal refuge and vertical refuge.

설계풍속 상향 조정에 따른 50ton급 컨테이너 크레인의 구조 안정성 평가 (The Analysis of a Structural Stability of a 50ton Container Crane according to an Increased Design Wind velocity)

  • 권순규;이성욱;한동섭;심재준;한근조
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2005년도 추계학술대회 논문집
    • /
    • pp.241-246
    • /
    • 2005
  • 본 연구는 컨테이너 크레인이 강풍에 대비하여 크레인을 고정하는 계류 시에 75m/s의 풍하중이 50ton급 컨테이너 크레인에 작용될 때, 풍향변화와 기계실의 위치 변화가 50ton급 컨테이너 크레인의 구조적 안정성에 미치는 영향을 분석하였다.. 본 연구에 적용된 설계 풍하중은 "건축물 하중 기준"에 의거하여 산출하였으며. 풍향은 $0^{\circ}\~180^{\circ}$$15^{\circ}$ 간격으로 적용하여 각 지지점에서의 반력을 분석하였다. 그리고 전체 자중의 $15\%$를 차지하는 기계실의 위치 변화가 컨테이너 크레인의 구조 안정성에 미치는 영향을 분석하였다. 그리고 이 결과들을 바탕으로 컨테이너 크레인의 전도방지장치인 타이다운(Tie-down)의 설계기준을 제시하였다.

  • PDF