• Journal of Preventive Medicine and Public Health
• /
• v.3 no.1
• /
• pp.97-110
• /
• 1970

This survey was conducted to evaluate not only the present status of health center directors-their personal histories, their will to private practice in the future, their responses to governmental policies, -but also the distribution of doctorless myons, budget and subsidy, and director's opinions to the enhancement of health center activities. This survey questioned 116 health center directors and 16 health personnel from August to October of 1970 and obtained the following results; 1) The average ages of directors of kun, city, and total health centers were $43.2{\pm}7.8,\;42.1{\pm}7.7,\;and\;42.9{\pm}10.3$ respectively. 2) The average family sizes of directors of kun, city, and total health centers were $5.6{\pm}2.7,\;5.6{\pm}2.1,\;and\;5.6{\pm}2.6$ respectively. 3) Directors holding M. D. degrees were 79.3%, those holding qualified M. D. degrees ('approved director') were 20.7%. 4) M. P. H., M. S., and Ph. D. holders were 6.0%, 6.1%, and 4.3% respectively. 5) The average duration of present directorship in kun and city were 30.2 months and 20.4 months respectively. 6) The majority of directors had been employed in related fields before assuming current position : directorship at other health center 26.7%, army 22.4%, health subcenter 21.6%, private practice 19.0%. 7) Average length of directorship is 41.8 months. Average length of public health career, including health subcenter and present position, is 56.5 months. 8) Both rural and urban experience in health centers for regular directors is 16.3% and for approved directors, 12,5%. A total of 15.5% of all survey directors had experience in both rural and urban health center. 9) A total of 70.7% of health center directorships were staffed by local doctors. 10) Nearly 40% wanted to quit the directorships within 3 years and 60.3% had already experienced private practice. 11) Of the regular directors 17.4% felt strongly about devoting their lives to public health fields, but only 4.1% of the approved approved directors felt so. 12) There wire 432 doctorless myons among 996 respondent myons and 4.5 doctorless myons per kun. 13) The percentage of doctorless myon by Province are as follows, Cholla buk-do 57.2%, Cholla nam-de 55.0%, Kyungsang nam-do 52.0%, Kyungsang buk-do 49.7%, Chungchong but-do 42.4%, Kyonggi-do 32.9%. Cheju-do 30.8%, Kangwon-do 25.8%. 14) Two thirds of health critters have experienced the abscence of the director for a certain period since 1966 and the average span of the abscence was 18.2 months. 15) The percentage of doctorless myons increased proportionally with the span of the director's abscence. 16) The average budgets of health centers, kun, city and ku, were $W15.03\;million{\pm}W4.5\;million,\;W22.03\;million{\pm}W17.80\;million,\;W13.10\;million{\pm}W7.9\;million$ respectively. 17) Chunju city had the highest health budget per capita(W344) while Pusan Seo ku had the lowest(W19). 18) Director's medical subsidies are W30,000-50,000 in kun, and roughly W20,000 in city. 19) The older of priority in health center activities is T.B. control(31.1%), Family Planning and M. C. H.(28.0%), prevention of acute communicable disease and endemic disease (18.2%) and clinical care of patients(14.3%). 20) Nearly 32% opposed in principle the governmental policy of prohibiting medical doctors from going abroad. 21) Suggestions for immediate enhancing the position of director of health centers and subcenters: (1) Raise the base subsidy (48.2%), (2) Provide more opportunities for promotion (20.7%), (3) Exemption from army services(12.1%), (4) Full scholarship to medical students for this purpose only (7.8%). 22) A newly established medical school was opposed by 56.9% of the directors, however 33.6% of them approved. 23) Pertaining to the division of labor in Medicine and Pharmacy, the largest portion (31.9%) urged the immediate partial division of antibiotics and some addictive drugs to be given only by prescription. 24) More than half wanted a W70,000 level for the director's medical subsidies, white 36.2% stated W50,000. 25) Urgently needed skills in the kun are clinical pathologist (38.6%) and doctor (health center director) (25.5%); while in the city nurse (37.1%), doctors(clinical)(31.4%) and health educators(14.4%) are needed. 26) Essential treatment for the better health center administration; raising the base subsidy (22.7%), obtaining the power of personal management (19.3%) and the establishment of a Board of Health (14.3%). etc.

• Radiation Oncology Journal
• /
• v.26 no.4
• /
• pp.289-294
• /
• 2008

Purpose: To improve the quality of the statistical analysis of papers published in the Journal of the Korean Society for Therapeutic Radiology and Oncology (JKOSTRO) by evaluating commonly encountered errors. Materials and Methods: Papers published in the JKOSTRO from January 2006 to December 2007 were reviewed for methodological and statistical validity using a modified version of Ahn's checklist. A statistician reviewed individual papers and evaluated the list items in the checklist for each paper. To avoid the potential assessment error by the statistician who lacks expertise in the field of radiation oncology; the editorial board of the JKOSTRO reviewed each checklist for individual articles. A frequency analysis of the list items was performed using SAS (version 9.0, SAS Institute, NC, USA) software. Results: A total of 73 papers including 5 case reports and 68 original articles were reviewed. Inferential statistics was used in 46 papers. The most commonly adopted statistical methodology was a survival analysis (58.7%). Only 19% of papers were free of statistical errors. Errors of omission were encountered in 34 (50.0%) papers. Errors of commission were encountered in 35 (51.5%) papers. Twenty-one papers (30.9%) had both errors of omission and commission. Conclusion: A variety of statistical errors were encountered in papers published in the JKOSTRO. The current study suggests that a more thorough review of the statistical analysis is needed for manuscripts submitted in the JKOSTRO.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_3
• /
• pp.1827-1836
• /
• 2022

Disasters that occur unexpectedly are difficult to predict. In addition, the scale and damage are increasing compared to the past. Sometimes one disaster can develop into another disaster. Among the four stages of disaster management, search and rescue are carried out in the response stage when an emergency occurs. Therefore, personnel such as firefighters who are put into the scene are put in at a lot of risk. In this respect, in the initial response process at the disaster site, robots are a technology with high potential to reduce damage to human life and property. In addition, Light Detection And Ranging (LiDAR) can acquire a relatively wide range of 3D information using a laser. Due to its high accuracy and precision, it is a very useful sensor when considering the characteristics of a disaster site. Therefore, in this study, development and experiments were conducted so that the robot could perform real-time monitoring at the disaster site. Multi-sensor module was developed by combining LiDAR, Inertial Measurement Unit (IMU) sensor, and computing board. Then, this module was mounted on the robot, and a customized Simultaneous Localization and Mapping (SLAM) algorithm was developed. A method for stably mounting a multi-sensor module to a robot to maintain optimal accuracy at disaster sites was studied. And to check the performance of the module, SLAM was tested inside the disaster building, and various SLAM algorithms and distance comparisons were performed. As a result, PackSLAM developed in this study showed lower error compared to other algorithms, showing the possibility of application in disaster sites. In the future, in order to further enhance usability at disaster sites, various experiments will be conducted by establishing a rough terrain environment with many obstacles.

• The Journal of Korean Society for Radiation Therapy
• /
• v.28 no.1
• /
• pp.17-25
• /
• 2016

Purpose : The purpose of this study is to evaluate the variability of tumor motion and respiration pattern in lung cancer patients undergoing Stereotactic Body RadioTherapy(SBRT) by using On-Board imager (OBI) system and Real-time Position Management (RPM) System. Materials and Methods : This study population consisted of 60 lung cancer patient treated with stereotactic body radiotherapy (48 Gy / 4 fractions). Of these, 30 were treated with gating (group 1) and 30 without gating(group2): typically the patients whose tumors showed three-dimensional respiratory motion > 10 mm were selected for gating. 4-dimensional Computed Tomography (4DCT). Cone Beam CT (CBCT) and Fluoroscopy images were used to measure the tumor motion. RPM system was used to evaluate the variability of respiration pattern on SBRT for group1. Results : The mean difference of tumor motion among 4DCT, CBCT and Fluoroscopy images in the cranio-caudal direction was 2.3 mm in group 1, 2. The maximum difference was 12.5 mm in the group 1 and 8.5 mm in group 2. The number of treatment fractions that patient's respiration pattern was within Upper-Lower threshold on SBRT in group 2 was 31 fractions. A patient who exhibited the most unstable pattern exceeded 108 times in a fraction Conclusion : Although many patients in group 1 and 2 kept the reproducibility of tumor motion within 5 mm during their treatment, some patients exhibited variability of tumor motion in the CBCT and Fluoroscopy images. It was possible to improve the accuracy of dose delivery in SBRT without gating for lung cancer patient by using RPM system.

• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.98-104
• /
• 2011

Numerical simulation in exploration geophysics provides important insights into subsurface wave propagation phenomena. Although elastic wave simulations take longer to compute than acoustic simulations, an elastic simulator can construct more realistic wavefields including shear components. Therefore, it is suitable for exploration of the responses of elastic bodies. To overcome the long duration of the calculations, we use a Graphic Processing Unit (GPU) to accelerate the elastic wave simulation. Because a GPU has many processors and a wide memory bandwidth, we can use it in a parallelised computing architecture. The GPU board used in this study is an NVIDIA Tesla C1060, which has 240 processors and a 102 GB/s memory bandwidth. Despite the availability of a parallel computing architecture (CUDA), developed by NVIDIA, we must optimise the usage of the different types of memory on the GPU device, and the sequence of calculations, to obtain a significant speedup of the computation. In this study, we simulate two- (2D) and threedimensional (3D) elastic wave propagation using the Finite-Difference Time-Domain (FDTD) method on GPUs. In the wave propagation simulation, we adopt the staggered-grid method, which is one of the conventional FD schemes, since this method can achieve sufficient accuracy for use in numerical modelling in geophysics. Our simulator optimises the usage of memory on the GPU device to reduce data access times, and uses faster memory as much as possible. This is a key factor in GPU computing. By using one GPU device and optimising its memory usage, we improved the computation time by more than 14 times in the 2D simulation, and over six times in the 3D simulation, compared with one CPU. Furthermore, by using three GPUs, we succeeded in accelerating the 3D simulation 10 times.

• Clean Technology
• /
• v.19 no.3
• /
• pp.219-225
• /
• 2013

Environment-friendly and surfactant-free aqueous cleaning agents have been developed in order to solve various problems generated by surfactants in the aqueous cleaning agents. Aqueous surfactant-free cleaning agents, S-1 and S-2 have been formulated with water-soluble solvents such as propylene glycol and propylene glycol ether on their main components and with some additives. These solvents were chosen because of their good solubility in water and excellent solubility of fluxes which are major contaminants of printed circuit board in the electronic industry. Physical properties of the formulated and the imported cleaning agents were measured to predict their cleaning performance, and their cleaning abilities of flux and solder contaminants were evaluated under the various ultrasonic frequencies by a gravimetric method. The measurement results show that the physical properties of cleaning agent V are generally similar with those of formulated cleaning agents S-1 and S-2. Both the cleaning agent V and the formulated cleaning agents S-1 and S-2 showed similar trends that their pH decrease in the beginning and then increases later on with the increase of their dilution in water. It is considered that the wetting indices of the cleaning agents calculated with experimental values do not not have any influence on their cleaning ability. In ultrasonic cleaning tests under three ultrasonic frequencies of 28, 45, and 100 kHz, their best performances of cleaning solder and flux were obtained at 45 kHz and 28 kHz, respectively, and the cleaning performance of the formulated cleaning agents S-1 and S-2 was better than that of the cleaning agent V. However, in the case of the recommended diluted concentration of 25 wt% cleaning solution, the cleaning performance of the cleaner V for solder and flux was better in the initial stage of cleaning compared to the formulated cleaners. And it may be concluded that the formulated cleaning agents S-1 and S-2 can be applied to cleaning of solder and flux in the industry, based on the experimental results in this study.

• Journal of Korean Society of Forest Science
• /
• v.10 no.1
• /
• pp.7-16
• /
• 1970

There are 19 species of bamboo in Korea, among which few are of commercial value. The Phyllostachys has wide range of utilization, for sea weed production, industrial production of various bamboo wares, etc. The total export from Chenla-Namdo to some more than ten countries was recorded 204,000,000 won worth in 1969. As civilization develops so does the techniques of bamboo works, and they in turn accelerate the demand for bamboo wood of better quality. In the light of this trend, the author attempted to make bamboo plants to develope a quadragular culm with elaborate design as disired instead of the original round one, with the expectation that it might be widely welcomed by hand workers, interior decorators. Here are some facts found out in this experiment: 1). The greater the diameter of the shoot at the eye level was, the better result was brought, and as shown in Fig. 5 the rate of success was 72% with the shoots of 7.5 cm thick. 2). The shoots of 30 cm in length showed 100% of success, developing into a desired quadrangular culms without fail(See Fig. 6). 3). The intensity of wood fiber increased as time lapsed, without receiving any influence by the weather (See Fig. 7, 8). 4). During the growing, the culm proved to be flexible enough to bend up to 90 degree (See Fig. 9). 5). In an attempt to promote the value of bamboo by decoration, the author tried to impress rectangular indents on the culm. The indention using a qudangular board 1cm smaller in width than the shoot diameter gave 100% success (See Fig. 10). 6). Design experiment was also successful both in coloration and impressing and the resulting designs delicately depended on the kinds of chemicals used and their combination (Table 2) (See Fig. 12, 13, 14). With the above mentioned findings, the author concludes that the mass production of quadrangular bamboo culm is quite a promissing as an new industry to develope bamboo works to a more valuable one. This research was carried out with the research fund provided by the Ministry of Education in 1969.

• Convergence Security Journal
• /
• v.15 no.6_1
• /
• pp.79-92
• /
• 2015

It is required to expand area of inter-Korean economic cooperation, being limited to non-military field, to military field and then, to positively promote arms control in order to establish foundation for peaceful reunification in Korean peninsula. Reasons why arms control has not been promoted between South and North Korea in the meantime were such original factors as follows; (1) limit of confidence building between the South and the North, (2) functional limit of arms control itself, (3) institutional structural limit between the South and the North, (4) environmental limit at home and abroad. It is necessary to get out from existing frame and to seek a new paradigm in order to overcome above factors and to realize arms control between the South and the North. First, it is required to have prior political dialog at the South-North high-level talks in order to promote arms control and to exercise 'strategic flexibility' during negotiation and promotion process. For this, 'flexible reciprocity' has to be adopted in compliance with situation and conditions. Second, it is necessary to get out from existing principle of 'confidence building in advance and arms reduction later' but to seek the 'simultaneous driving principle of confidence building and arms reduction' as an eclectic approach. Namely, based on reasonable sufficiency, it is required to promote military confidence building and limited arms reduction in parallel, which is a lower level of arms control. Third, as an advisory body of Prime Minister's Office, it is necessary to install an organization exclusively responsible for arms control and to positively handle arms control issue from the standpoint of national policy strategy. If the South-North high-level talks take place, it is necessary to organize and operate 'South-North Joint Arms Control Promotion Board (tentative name)'. Fourth, it is required to exercise more active diplomatic competence in order to create national consensus on necessity of arms control for peaceful reunification and to form more favorable international environment. Especially, it is necessary to think about how to solve nuclear issue of North Korea together in collaboration with international society and how to maintain balance between ROK-US alliance and Sino-Korean cooperation relations.

• Korean Journal of Environmental Biology
• /
• v.32 no.1
• /
• pp.58-67
• /
• 2014

The outdoor mass cultivation is not possible for microalgae in Korea all year round, due to cold winter season. It is not easy to maintain proper level of productivity of microalgae even in winter. To prevent a drastic decrease of temperature in a greenhouse, two layers were covered additionally, inside the original plastic layer of the greenhouse. The middle layer was made up of plastic and the inner layer, of non-woven fabric. Acrylic transparent bioreactors were constructed to get more sunlight, not only from the upper side but also from the lateral and bottom directions. In winter at freezing temperatures, six different culture conditions were compared in the triply covered, insulated greenhouse. Wastewater after anaerobic digestion was used for the cultivation of microalgae to minimize the production cost. Water temperature in the bioreactors remained above $10^{\circ}C$ on average, even without any external heating system, proving that the triple-layered greenhouse is effective in keeping heat. Algal biomass reached to 0.37g $L^{-1}$ with the highest temperature, in the experimental group of light-reflection board at the bottom, with nitrogen and phosphorus removal rate of 92% and 99%, respectively. When fatty acid composition was analyzed using gas-chromatography, linoleate (C18 : 3n3) occupied the highest proportion up to 61%, in the all experiment groups. Chemical oxygen demand (COD), however, did not decrease during the cultivation, but rather increased. Although the algal biomass productivity was not comparable to warm seasons, it was possible to maintain water temperature for algae cultivation even in the coldest season, at the minimum cost.

• Journal of the Korean Chemical Society
• /
• v.64 no.6
• /
• pp.416-428
• /
• 2020

This study analyzed the uses of external representations presented in the matter units of the 7th-grade science digital textbooks developed under the 2015 revised national curriculum. The level, form, presentation, and interactivity of external representations presented in 5 types of digital textbooks were analyzed. As for the level, the macroscopic level of representations was mainly presented. The macroscopic level and microscopic level of representations were presented together in the particle description. As for the form, visual-verbal and visual-nonverbal representations were usually presented across the board. Very few audial-verbal and audial-nonverbal representations were presented. Visual-verbal and audial-verbal representations were mostly presented in formal form, and visual-nonverbal representations were mostly presented in illustration without movement. The presentation of representations was analyzed in three aspects. First, visual-verbal and visual-nonverbal representations were mainly presented together and none of audial-verbal and visual-nonverbal representations were presented together. When the representations of the audial-verbal, visual-nonverbal, and visual-verbal were presented together, some of the information presented in audial-verbal representations was repeatedly presented in the visual-verbal representations. Second, audial-nonverbal representations not related to learning content were presented along with other representations. Third, there were few cases of arranging visual-verbal and visual-nonverbal representations on the next pages. Audialverbal and visual-nonverbal representations were always presented synchronized. As for the interactivity, the manipulation level was mainly presented in the main area, and the feedback level was mainly presented in the activity area. The adaptation level and the communication level of interactivity were presented very few. Based on the results, the implications for the direction of constructing digital textbooks were discussed.