• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.917-924
• /
• 2019

This paper presents a wideband low noise amplifier (LNA) that is suitable for LTE-Advanced and 5G communication standards employing carrier aggregation (CA). The proposed LNA encompasses a common input stage and a dual output second stage with a buffer at each distinct output. This architecture is targeted to operate in both intra-band (contiguous and non-contiguous) and inter-band CA. In the proposed design, the input and second stages employ a gm enhancement with resistive feedback technique to achieve self-biasing, enhanced gain, wide bandwidth as well as reduced noise figure of the proposed LNA. An up/down power controller controls the single input single out (SISO) and single input multiple outputs (SIMO) modes of operation for inter-band and intra-band operations. The proposed LNA is designed with a 45nm CMOS technology. For SISO mode of operation, the LNA operates from 0.52GHz to 4.29GHz with a maximum power gain of 17.77dB, 2.88dB minimum noise figure and input (output) matching performance better than -10dB. For SIMO mode of operation, the proposed LNA operates from 0.52GHz to 4.44GHz with a maximum voltage gain of 18.30dB, a minimum noise figure of 2.82dB with equally good matching performance. An $IIP_3$ value of -6.7dBm is achieved in both SISO and SIMO operations. with a maximum current of 42mA consumed (LNA+buffer in SIMO operation) from a 1.2V supply.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.6
• /
• pp.18-25
• /
• 2007

In a plastic metal forming of thermally rate-sensitive material, the localized shear band stems from evolution of a narrow region in which intensive plastic flow occurs. And it give rise to fatal fracture with plastic instability. The objectives of this study are to investigate the localization behavior by using numerical method and predict the failure for WHA(Tungsten Heavy Alloy). In this work, the implicit finite difference scheme is used because of the advantage about convergence and the numerical stability. This study is based on an analysed material with hardening as well as thermally softening behavior which includes isotropic strain hardening and observed the extension of localization within shear band according to material properties.

• The Korean Journal of Zoology
• /
• v.23 no.1
• /
• pp.1-12
• /
• 1980

Changes and possible origin of haemolymph proteins during the cuticle formation and hardening are determined by means of acrylamide gel electrophoresis and immunodiffusion. The results by acrylamide gel electrophoresis showed at least 19 protein bands in the haemolymph and 13 fractions in the fat body with relatively constant pattern during the period of cuticle formation and hardening. Both haemolymph and fat body proteins are generally characterized by the presence of three to four heavy stained bands and several thin bands near the top region of the gel. At least over five haemolymph proteins are constantly present during this period. Immunodiffusion tests show that of total eight to nine pupal haemolymph proteins two proteins were already detected in the fat body before pupation and other two proteins were also found in the fat body immediately after pupation, suggesting fat body as possible source of these two haemolymph proteins.

• The Journal of the Acoustical Society of Korea
• /
• v.8 no.4
• /
• pp.44-52
• /
• 1989

The UCERSS (Unit Circle Eigendecomposition Rational Signal Subspace) algorithm has extended MUSIC (MUltiple Signal Classification ) by using eigendecomposition on the unit circle in order to estimate incident angles of multiple wide band signals. The purpose of this thesis is to further extend the UCERSS to be able to estimate the direction of arrivals of multiple wide band signals in very low SNR . The wide band ESPRIT (Estimation of Signal Parameter via Rotational Invariance Technique) uses covariance difference matrices to reduce noise components. In this paper the wide band ESPRIT which combines the ideas of UCERSS and ESPRIT Is proposed. Computer simulation results Indicate that the performances of the proposed approaches are superior to those of the UCERSS in very low SNR.

• The Journal of Korean Physical Therapy
• /
• v.25 no.2
• /
• pp.110-116
• /
• 2013

Purpose: This study was conducted in order to determine the physical effect on grip strength and balance ability of progressive resistance training using an elastic band for middle elderly women. Methods: We randomly recruited 13 middle elderly female subjects (from 75 years old to 84 years old). They practiced the elastic band exercise for 50 minutes once every week and were instructed to perform the same exercise as a home exercise for 16 weeks. Subjects who participated voluntarily had not participated in any other exercise program. Grip strength, one leg stance, and TIme Up & Go Test (TUG) were measured before and after elastic band exercise using the one group pre-posttest design. Wilcoxon's signed ranks test and simple regression analysis were performed using SPSS 18.0. Results: Significant differences in TUG and grip strength test scores were observed pre and post exercise (p<0.05), except one leg stance test. Significant correlation was observed only between age and change of right one leg stance. Conclusion: Progressive resistance training using an elastic band for middle elderly women was effective for dynamic balance and grip strength, but was not effective for static balance. Therefore, investigation of factors that affect improvement of static balance using an elastic band and the lasting duration of the effect and its association with age will be necessary in the future.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.8
• /
• pp.783-789
• /
• 2002

In this paper, V-band MMIC coupled oscillator arrays are presented. In the proposed array, two push-pull patch antennas are synchronized by using strong electromagnetic coupling between two antennas. As a result, total size of the array is reduced and the array can be integrated in a single chip. To verify proposed array concept, two 1$\times$2 arrays are designed and fabricated using standard 0.15 um gate length pHEMT MMIC process. The circuits are mounted in an oversized waveguide and measured. The first array shows 0.5 dBm at 56.372 GHz and the second one has an output of 5.85 dBm at 60.147 GHz.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.255-261
• /
• 2022

A reliable and well-characterized dosimetry system which is traceable to the international measurement system, is the key element to quality assurance in radiation processing with cobalt-60 gamma rays, X-rays, and electron beam. This is specifically the case for health-regulated processes, such as the radiation sterilization of single use medical devices and food irradiation for preservation and disinfestation. Polyethylene is considered to possess a lot of interesting dosimetric characteristics. In this work, a detailed study has been performed to determine the dosimetric characteristics of a commercialized high-density polyethylene (HDPE) film using Fourier transformed infrared spectrometry (FTIR). Correlations have been established between the absorbed dose and radiation induced infrared absorption in polyethylene having a maximum at 965 cm^-1 (transvinylene band) and 1716 cm^-1 (ketone-carbonyl band). We have found that polyethylene dose-response is linear with dose for both bands up to1000 kGy. For transvinylene band, the dose-response is more sensitive if irradiations are made in helium. While, for ketone-carbonyl band, the dose-response is more sensitive when irradiations are carried out in air. The dose-rate effect has been found to be negligible when polyethylene samples are irradiated with electron beam high dose rates. The irradiated polyethylene is relatively stable for several weeks after irradiation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.1
• /
• pp.31-38
• /
• 2020

In this paper, we propose a quadruple band antenna for GPS/WLAN/WiMAX application. The proposed antenna has quadruple band characteristics by considering the interconnection of four strip lines and DGS on the ground place. The total substrate size is 20.0 mm (W1) ⨯27.0 mm (L1), thickness (h) 1.0 mm, and the dielectric constant is 4.4, which is made of 20.0 mm (W2)⨯ 27.0 mm (L8 + L6+ L10) antenna size on the FR-4 substrate. From the fabrication and measurement results, bandwidths of 60 MHz (1.525 to 1.585 GHz) bandwidth for GPS band, 825 MHz (3.31 to 4.135 GHz) bandwidth for WiMAX band and 480 MHz (2.395 to 2.975 GHz) and 385 MHz (5.10 to 5.485 GHz) bandwidth for WLAN band were obtained on the basis of -10 dB. Also, gain and radiation pattern characteristics are measured and shown in the frequency of triple band as required.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.8
• /
• pp.68-73
• /
• 2010

In this paper, a compact Ultra-Wideband band-pass filter with notched band at 5.8GHz by using LC resonator is proposed. The structure of the proposed band-pass filter is very simple, and the DGS(Defected Ground Structure) is used to get the low-pass filter characteristics and the LC resonator is used to get the notched filter. The proposed band-pass filter can be much smaller than a cascaded filter type. The LC resonator is designed with a radial stub and small stub. As a result of measurement, the insertion loss is less than 0.5dB throughout the pass-band of 2.21GHz~10.92GHz, the return loss is more than 16dB and the maximum variation of group delay is 0.29ns and a notched band is 5.2GHz~6.2GHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.6
• /
• pp.1049-1056
• /
• 2016

In this paper, a design method for a compact dual-band slot antenna with bent slot is studied. Bent slots are added on the rectangular slot of the proposed antenna for dual-band operation. The rectangular slot is fed by a coaxial cable by placing a rectangular feeding patch inside the slot. When the bent slots are added onto the both corner of the upper side of the rectangular slot symmetrically, a new resonant frequency is created in low frequency because of the increasement of the slot length. A prototype of the proposed dual-band slot antenna operating at 2.45 GHz WLAN band and 4.50-8.30 GHz band including 5GHz WLAN band is fabricated on an FR4 substrate with a dimension of 30 mm by 30 mm. Experiment results show that the antenna has a desired impedance characteristic with a frequency band of 2.40-2.49 GHz and 4.33-9.85 GHz for an input reflection coefficient < -10 dB.