• Journal of agricultural medicine and community health
• /
• v.30 no.1
• /
• pp.39-50
• /
• 2005

Objectives: This investigation was carried out to explore the source and the mode of transmission of the diarrhea outbreak in Seongju-gun, Gyeongbuk, 2004 Methods: The authors conducted a questionnaire survey among the 275 persons (students, staff members and cooks) who ingested the possibly contaminated foods. We also investigated the drinking water and the dining facility, and we reviewed the process of cooking the salad, which was the presumed cause of the Enteropathogenic Escherichia coli(EPEC) diarrhea. The confirmed EPEC diarrheal case was defined as culture positive for EPEC, and the suspicious case was defined as diarrheal case with symptoms more than one of fever, vomiting and tenesmus. Results: The attack rate of EPEC diarrhea was 36.7%, and there were 8 confirmed cases. The possibility of the drinking being a source of the infection was very low, for chlorine was detected in all the drinking water via reviewing the past records and using a portable detector. The foods that were significantly associated with diarrhea were found. The relative risk (RR) for the lunch served Jul 7 was 4.12 (95% CI: 1.39-12.20). Among the non-boiled foods that were finally served, the RR for the salad was 1.66 (95% CI: 1.07-2.57). The cause of this outbreak was presumed to be the contaminated foods that were prepared by cooks using rubber glove with holes, and especially the salad and foods that were served sans boiling on Jul 7. Conclusions: Though this EPEC infection was not so clinically important, if a larger outbreak occurred, it might severely affect the public health. It is recommended to develop the more safe methods for cooking foods, and to strengthen the sanitary processing foods.

• Clinical and Experimental Reproductive Medicine
• /
• v.34 no.2
• /
• pp.107-115
• /
• 2007

Objective: A quality management system of international standardization organization (ISO) 9001:2000 has been proposed to properly evaluate and improve the quality of productions and services. The purpose of this article was to describe on successful introduction and application of the ISO system to human assisted reproductive technology (ART) center. Methods: Center for reproductive medicine and infertility of Cheil General Hospital started the action for ISO 9001:2000 certification at January-2004. The ISO system of our center was monitored by measuring the customer satisfaction index and periodical internal and external audit. Reports of non-conformity described corrective and preventive actions for problems and occurrences that were not consistent with the standard process and operation of our center. Continuous management and improvement were performed on the project of customer dissatisfaction. Results: Our center has got the certification of ISO 9001:2000 for "Research and development of IVF-ET program for infertility treatment" from Korean Foundation for Quality at June-2004. The policy of ISO was "To establish the best center of reproductive medicine and infertility" and "To establish the best quality management system". We found 140 cases and 7 cases of non-conformity in internal and external audit for three years, respectively, and performed corrective action. Conclusion: Improvement of customer satisfaction, systemic documentation and transparency and efficacy of working procedure were achieved by application and operation of the ISO system to our center. This ISO system could be used as a basic institutional management system for the national guideline to the human ART center.

• Solar Energy
• /
• v.11 no.3
• /
• pp.53-61
• /
• 1991

In this research, Octacosane($C_{28}H_{58}$) and Sodium Acetate Trihydrate($CH_3COONa{\cdot}3H_2O$) were selected as latent heat storage materials to store off-peak electricity or waste heat of an industrial plant. Experimental analyses were performed in terms of the variation of phase change temperature and latent heat, phase change stability for the long term utilization. The results were as follows. 1. The phase change temperatures of industrial grade Octacosane and Sodium Acetate Trihydrate were $60.7^{\circ}C$ and $57.4^{\circ}C$, the latent heat were 60.6kcal/kg and 51.1kcal/kg respectively. 2. The latent heat quantity of Octacosane was decreased with the increasing number of phase change cycles. It decreased from 60.6kcal/kg to 47.2kcal/kg upto 200 cycles and then no variation was observed after 200 cycles. 3. To prevent the supercooling of Sodium Acetate Trihydrate, the nucleating agent, Sodium Pyrophosphate Decahydrate of 3 wt% was added, and then the supercooling temperature (Tm-Tsc) was decreased from $25.7^{\circ}C$ to $1^{\circ}C$. The phase separation was disappeared by the addition of CMC-Na of 3 wt% as a thickener. It was found that the optimal quantity of nucleating agent and thickener was 4wt% considering the stability of SAT as a latent heat storage material. 4. The phase change temperature of Sodium Acetate Trihydrate($CH_3COONa{\cdot}3H_2O$) was adjusted from 57.4 to $46.2^{\circ}C$ by the addition of UREA. And then the latent heat quantity was decreased from 51.1 to 38.3kcal/kg. 5. When the heat storage capacities between the sensible and latent heat storage materials were analyzed and compared in heating process from 30 to $90^{\circ}C$, the heat storage capacity of Octacosane was 2.45 times larger than water and 12.5 times than granite at $60.7^{\circ}C$, and the heat storage capacity of Sodium Acetate Trihydrate was 2.53 times larger than water and 12.91 times than granite at $57.4^{\circ}C$.

• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.528-537
• /
• 2008

60 nm and 20 nm thick hydrogenated amorphous silicon(a-Si:H) layers were deposited on 200 nm $SiO_2$/single-Si substrates by inductively coupled plasma chemical vapor deposition(ICP-CVD). Subsequently, 30 nm-Ni layers were deposited by an e-beam evaporator. Finally, 30 nm-Ni/(60 nm and 20 nm) a-Si:H/200 nm-$SiO_2$/single-Si structures were prepared. The prepared samples were annealed by rapid thermal annealing(RTA) from $200^{\circ}C$ to $500^{\circ}C$ in $50^{\circ}C$ increments for 40 sec. A four-point tester, high resolution X-ray diffraction(HRXRD), field emission scanning electron microscopy(FE-SEM), transmission electron microscopy(TEM), and scanning probe microscopy(SPM) were used to examine the sheet resistance, phase transformation, in-plane microstructure, cross-sectional microstructure, and surface roughness, respectively. The nickel silicide from the 60 nm a-Si:H substrate showed low sheet resistance from $400^{\circ}C$ which is compatible for low temperature processing. The nickel silicide from 20 nm a-Si:H substrate showed low resistance from $300^{\circ}C$. Through HRXRD analysis, the phase transformation occurred with silicidation temperature without a-Si:H layer thickness dependence. With the result of FE-SEM and TEM, the nickel silicides from 60 nm a-Si:H substrate showed the microstructure of 60 nm-thick silicide layers with the residual silicon regime, while the ones from 20 nm a-Si:H formed 20 nm-thick uniform silicide layers. In case of SPM, the RMS value of nickel silicide layers increased as the silicidation temperature increased. Especially, the nickel silicide from 20 nm a-Si:H substrate showed the lowest RMS value of 0.75 at $300^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.37 no.2
• /
• pp.183-188
• /
• 2005

Effects of co-solvent polarity, citric acid, pressure, temperature, run time, and co-solvent ratio on extraction of major flavonoids from Lonicera Flos were investigated using supercritical fluid $CO_{2}(SF-CO_{2})$. HPLC analysis revealed addition of pure methanol resulted in low extraction yield of major flavonoids, luteoloin (Lu), Quercetin (Qu), Apigenin (Ap). Under same condition, as co-solvent polarity increased, yields of major flavonoids increased gradually, At optimum co-solvent extraction condirion of 60% aqueous methanol (10%, v/v), yields of Lu, Qu, and Ap were 42.09, 28.18, and 3.49 mg/100 g, respectively. Addition of citric acid to 60% aqueous methanol gave higher, with addition of 1% citrie acid resulting in highest yields of 63.2 (Lu), 39.35 (Qu), and 5.79 (Ap) mg/100 g. Optimum extraction conditions of major flavonoids were 200 bar, $50^{\circ}C$, 60 min, and $CO_{2}$-methanol-water(20: 1.8: 1.2).

• Journal of Environmental Impact Assessment
• /
• v.28 no.6
• /
• pp.549-555
• /
• 2019

The purpose of this study is to ensure optimal operating conditions for improving the removal efficiency of phosphorus (P) and nitrogen (N) that are the causative agents of eutrophication by utilizing functional media. The main ingredients of the functional media used in this study are Si, Al, and Fe, SiO₂, KAlSiO₃O₈, Al₂O₂·2SiO₂O, H₃Al₂Si₂O₉, Fe₃O₄O), and berylite. To identify the maximum efficiency of the filtration process, the processing efficiency experiment was carried out according to flow method, velocity, and thickness of residual media. The flow method carried out two experiments, 50 m/day, 100 m/day, 150 m/day, 200 m/day, 250 m/day, and 20 cm, 40 cm, 50 cm, 60 cm, 80 cm of lead depth. Experiments have shown that SS, T-N, and T-P all showed higher elimination efficiency of the upflow current conditions than the downflow current conditions, and that the processing efficiency of the linearity is the highest at SS 50 m/day, T-N 150 m/day and T-P 100 m/day. In addition, the analysis of the removal efficiency according to the residual thickness showed that SS, T-N, and T-P all showed the highest efficiency at 60 cm. In addition, the analysis of the removal efficiency according to the residual thickness showed that SS, T-N, and T-P all showed the highest efficiency at 60 cm. It is considered desirable to set the top-down flow conditions and residual thickness of 60 cm and adjust the velocity of the line according to the target media for removal.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.6 s.165
• /
• pp.985-996
• /
• 2007

The purpose of this study is to analyze the symbolism of traditional Korean patterns which reflect an emotional cultural background of Korean people, to apply modernized and developed patterns to Textile Design for fashion cultural products, and to explore productive direction of developing designs of fashion cultural products. The process of developing Textile Design of fashion cultural products which applied symbolism of traditional Korean patterns was conducted as follows. Firstly, based on '05 S/S-'07 S/S fashion trends, a design concept wat decided(man-urban ethnic style, woman-romantic ethnic style). Secondly, motive was abstracted from selected traditional patterns to develop into modem patterns. Thirdly, items were selected according to symbolic meaning of traditional Korean patterns. Man's items included shirts, necktie, and handkerchief which were highly preferred by Korean and foreign visitors. Finally, developed textile designs were diagrammed by item using textile CAD and an illustrator 10 and presented as images. The following results were obtained. First, textile designs for fashion cultural products, in which apply traditional patterns may reflect the understanding of traditional aesthetic beauty and philosophical approach by applying symbolic significance inherent in patterns as well as the aesthetics of the patterns. Second, traditional patterns have been recognized as old fashioned to consumers because they have been often used for traditional handicrafts or folk products. If their unique shapes are changed or simplified, emphasizing images, and trend styles and colors are used, they will be recreated as a modem design. Third, textile designs using traditional patterns may provide various images and visual effects according to techniques and production methods. Then, the method will be applied to many items. Finally, since traditional patterns in fashion cultural products can be used as our unique design elements, they can be utilized as the source of design inspiration for the development of value-added products.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.4
• /
• pp.285-292
• /
• 2017

We investigated physicochemical properties of puffed snacks with intermediate and high amylose rice varieties. The intermediate amylose rice varieties 'Sindongjin' and high amylose rice varieties newly developed for food processing, 'Dodamssal' and 'Goami4' were tested for this study. The crude fat and crude protein contents of the rice cultivars ranged 1.47-3.08% and 6.30-7.63%, respectively. The resistant starch and amylose contents of Dodamssal and Goami4 were higher than those of Sindongjin. The hardness of rice was the highest in Sindongjin and Dodamssal. Also, Hardness of puffed snacks decreased by 72.07% for Sindongjin, 88.21% for Dodamssal and 66.67% for Goami4 compared to raw rice samples. The sensory evaluation showed that the highest scores in taste, texture and overall acceptability of puffed snacks were obtained in Dodamssal. The results of this study indicate that Dodamssal was suitable varieties for puffed snacks. Also, the physicochemical properties of Dodamssal were improved by the extrusion process. Therefore Dodamssal can be used for the industrial production of puffed snacks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1654-1660
• /
• 2009

Two different cutting-oils from H and B companies which are sold as an eco-friendly cutting-oils were selected and the biodegradability of these commercially available cutting-oils was evaluated by the sequencing batch reactor (SBR) processes. The cutting-oil wastes ($H_1$) pre-treated by coagulation/flocculation was used as an influent to SBR. When the F/M ratio was operated 0.04 to 0.08kgCOD/kgMLSS d, removals of $BOD_5$and $COD_{Cr}$were above 97% and 91%, respectively. T-N and T-P removals were above 76% and 81%, respectively. If the diluted cutting-oil wastes ($B_1$) was used as an influent of the SBR, $COD_{Cr}$removals were above 77% at the F/M ratio of 0.01-0.02kgCOD/kgMLSS d. After the cutting-oil wastes was treated by coagulation/ flocculation ($B_2$), $COD_{Cr}$removals was above 85%. If the pre-treated cutting-oil wastes were mixed with a synthetic wastewater ($B_3$) and fed into the SBR in order to mimic the real wastewater treatment plant situation, $BOD_5$and $COD_{Cr}$removals were above 97%, 91%, respectively. T-N and T-P removals were above 79% and 76%. The ratio between $BOD_5$and $COD_{Cr}$, ($COD_{Cr}$-$BOD_5$)/$COD_{Cr}$, indicating the biodegradability of effluent of the SBR, was calculated to 85% and 61%. This means that significant amounts of non-readily-biodegradable organic compounds in the effluent of $H_1$, $B_3$are still present.

• Korean Journal of Remote Sensing
• /
• v.31 no.6
• /
• pp.531-548
• /
• 2015

Atmospheric Motion Vector (AMV) from satellite images have shown Slow Speed Bias (SSB) in comparison with rawinsonde. The causes of SSB are originated from tracking, selection, and height assignment error, which is known to be the leading error. However, recent works have shown that height assignment error cannot be fully explained the cause of SSB. This paper attempts a new approach to examine the possibility of SSB reduction of COMS AMV by using a new target tracking algorithm. Tracking error can be caused by averaging of various wind patterns within a target and changing of cloud shape in searching process over time. To overcome this problem, Gaussian Mixture Model (GMM) has been adopted to extract the coldest cluster as target since the shape of such target is less subject to transformation. Then, an image filtering scheme is applied to weigh more on the selected coldest pixels than the other, which makes it easy to track the target. When AMV derived from our algorithm with sum of squared distance method and current COMS are compared with rawindsonde, our products show noticeable improvement over COMS products in mean wind speed by an increase of $2.7ms^{-1}$ and SSB reduction by 29%. However, the statistics regarding the bias show negative impact for mid/low level with our algorithm, and the number of vectors are reduced by 40% relative to COMS. Therefore, further study is required to improve accuracy for mid/low level winds and increase the number of AMV vectors.