• 한국염색가공학회지
• /
• 제14권4호
• /
• pp.197-207
• /
• 2002

The physical properties and dyeability of the nylon 6 fibers prepared by high speed spinning at take-up speed of 4,100~5,600m/min were investigated. The strain decreased as the take-up speed was raised from 4,100m/min to 4,400m/min, but further increase of take-up speed could not decrease the strain. The stresses of the fibers spinned at various take-up speed did not make any noticeable differences. Birefringences, densities and crystallinities of the fibers increased with the take-up speed and then reached to a nearly maximum value at 5,300m/min. In DSC diagrams, the $\gamma$ form of crystal became dominant at higher take-up speed. The dye uptakes of C. I. Acid Blue 113 on the fibers decreased a little with the increase of take-up speed.

• 한국CDE학회논문집
• /
• 제20권2호
• /
• pp.182-192
• /
• 2015

In recent years, numerous studies have attempted to extract quantity data by using Building Information Modeling (BIM). In terms of open-BIM based quantity take-off at the early design stage, only few studies were conducted in the field of cost engineering. A lack of compatibility of open BIM for information exchange is postulated as the cause. The Industry Foundation Classes (IFC) extension model has been developed to accommodate the interoperability with quantity take-off software. Improvement of open BIM for quantity take-off needs exchange requirements and model guidelines. For this purpose, the quantity data of IFC models were analyzed using BIM analysis tools. This paper also provides a proposal of requirements on open BIM based quantity take-off at the early design stage. Further this study have been develop the interface system for open BIM based quantity take-off requirements with the results on this study.

• 한국운동역학회지
• /
• 제16권4호
• /
• pp.13-20
• /
• 2006

A platform diving with categorizing 624C motion was video taped and 3D kinematic variables were analyzed. This motion is consist of 3 parts from the headstand position to the act of turning after take-off. The results indicated that it took a very short time from the moment of take-off to the act of 1/2 turning because the turning motion has already started from preparing motion even before the fingertips have parted from the ground. Also, there was barely any jumping height due to the use of upper limbs segment and there was little difference in the moving distance compared to the standing events judging from horizontal movement of 1.1m. The horizontal velocity of the center of human body was increased before take-off while the vertical velocity was decreased right after take-off and the velocity of lower limbs segment was faster than the upper limbs segment showing contrary results to the standing events. In the aspects of angular velocity, the upper limbs segment starts the turning motion when take-off by rapidly extending its angular velocity while lower limbs segment make large angular velocity even before take-off.

• 한국산학기술학회논문지
• /
• 제15권3호
• /
• pp.1241-1246
• /
• 2014

일반적으로 감속기, 모터 등과 같은 동력 전달시스템에 의해 발생하는 진동, 소음 등은 취출로봇의 효율성, 내구성, 정밀도와 신뢰성 등을 결정짓게 된다. 본 연구는 유한요소해석을 통하여 취출로봇 구조물의 안전성을 평가하고자 한다. 취출로봇은 사출물을 한 곳에서 다른 곳으로 이송시키는 자동화 로봇이다. 취출로봇 구조는 가로 1300mm, 세로 670.5mm, 높이 670mm 이고, 구조물의 무게는 380kg이다. 자중해석을 통하여 자중과 하중에 의한 변위와 등가응력을 확인하고, 모드해석을 통하여 취출로봇의 고유진동수를 찾는다. 응답해석을 통하여 취출로봇의 고유진동수에 대한 변위와 가속도 응력을 확인하고자 한다. 또한, 취출로봇 구조를 변경해가면서 해석을 반복하여 결과를 확인하고 구조물의 안전성 여부를 판단한다. 이들 해석결과들은 취출로봇의 진동을 저감시키는데 유용하다.

• 한국동물학회지
• /
• 제39권2호
• /
• pp.132-138
• /
• 1996

To learn how maximal locomotory speed of animals is defined in terms of hindlimb structure and muscle contractile function, take-off speed, hindlimb length, thigh muscle mass, shortening velocity and power of the sastrocnemius muscle were measured with one fast species, Rono nigromaculota and one relatively slowresponding species, Bombina orientalis. Take-off speed (m.sec-1) was greater in R. nigromoculata $(2.4\pm0.2SD, $ n: 14) than in the Bombino $(1.6\pm0.1SD, $ n=8). Stvle of the take-off response was a long-iump type in the Rano and a short-ranged hopping in the Bombing. Faster take-off capacity of the ranid frogs was supported by the longer hindlimb length (relative to body length) and the more massive thigh muscles (relative to body mass), compared to the Bombina. Further, the ranids exhibited faster maximal shortening velocity and Breater maximal power generateion than the Bombina [Vmax $(ML.sec-1)=11.79\pm1.69SD$ for the Runa and $9.74\pm1.27SD$ for the Bombina; Pmax $nW.kg-1)=222.42\pm42.42SD$ for the Rono and $169.03\pm34.52SD$ for the Bombinal. With more massive thigh muscles and greater mechanical power, the ranids would generate greater total power and thus higher energy release per unit time to muscle tissues for the burst take-off. As a consequence, biomechanical properties seen in the ranids seem to be more effective for frost take-off than in the Bombina.

• 한국콘텐츠학회논문지
• /
• 제12권4호
• /
• pp.143-155
• /
• 2012

영화 <졸업>은 미국 마이크 니콜스 감독의 1967년 초기 작품이다. 오랜 세월이 지난 영화임에도 불구하고 빠르고 박진감 있게 드라마를 이끄는 힘을 가진 대한 의문에서 연구를 시작했다. 그 힘의 중심에는 롱테이크의 효과적인 사용이 있었다. 이 영화의 거의 모든 씬에서 롱테이크가 사용되고 있으며 몇 개의 씬은 롱테이크만으로 구성되어있다. 그리고 롱테이크의 사용 빈도가 높을 경우 발생할 수 있는 지루함, 또는 극중 몰입에서 일탈할 수 있는 영화적인 자각을 막기 위한 효과적인 영화적 장치들의 사용도 돋보인다. 한 쇼트 안에서의 효율적인 연기 연출과 미장센의 조화를 통해 상황과 인물에 대한 심리적인 몰입이 극대화되며 의도적인 몇 장면을 제외하고는 롱테이크를 인식조차 하기 힘들다. 롱테이크를 위해 사용되는 세부적인 요소들인 카메라 워킹과 조명 등의 기계적 장치와 배우들의 대사, 연기 그리고 이동 동선 등이 절묘하게 연결되어 서로 유기적인 작용을 하고 있기 때문이다. 본문에서 소개하는 대부분의 롱테이크는 여러 개의 짧은 쇼트들로 대체되는 것이 오히려 일반적일 수 있다. 하지만 마이크 니콜스는 이 영화에서 여러 개의 쇼트들 대신 롱테이크를 선택한 이점들을 확실하게 보여준다. 이 영화에서의 롱테이크는 일반적인 미학적 가치가 발생하는 롱테이크와는 약간 다른 목적을 보여주고 있다. 그 활용에 대한 구체적인 방법과 효과를 분석해 보는 것이 이 연구의 목적이다.

• 한국소음진동공학회논문집
• /
• 제21권1호
• /
• pp.41-46
• /
• 2011

In this paper, we experimentally investigate factors that decrease in noise of a industrial take-out robot at driving state. For this, we analyse change in the noise of the take-out robot with gear machining accuracy and clearance. In order to calculate the noise related to gear machining accuracy that is based upon the Japanese Industrial Standard(JIS), we equally increase motor speed from 0 rpm to 1250 rpm. In addition, to investigate influence of clearance on noise, we evenly change clearance from 0.5 mm to 1.2 mm. These experiments show that clearance is more effective factor than gear machining accuracy to reduce the noise of the take-out robot.

• Journal of Nutrition and Health
• /
• 제19권6호
• /
• pp.420-426
• /
• 1986

This survey was carried out to investigate the effect of taking a nutrition course on the nutrition knowledge and food habits of college students who do not major nutrition. Questionnaires were completed by 444 students who have taken nutrition course and by 555 students who did not take nutrition course. Nutrition knowledge score of the students taken nutrition course was significantly higher than that of students did not take nutrition course(p<0.001). Especially male student obtained lower nutrition knowledge score than female students in graups who did not take nutrition course (p<0.001), but there was no difference in nutrition knowledge score between male and female students who have taken nutrition course. The students taken nutrition course showed higher food habits score than those who did not take nutrition course (p<0.001). The former had a lower response rate than that of the latter, for what are regarded as poor food habits. There was a significant and positive correlation between nutrition knowledge score and food habits score in students who have taken nutrition course but not significant correlation in those who did not take nutrition course.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.263-267
• /
• 2015

Stakeholders of a construction project expect cost savings through fast and accurate cost analysis by performing BIM-based quantity take-off (BQT). However, authors have observed that there can be discrepancies in the results of BQT depending on the level of development (LOD) and modeling methods. In addition, since quantity take-off methods are different depending on the construction work items, the combination of LOD, modeling methods of BIM, features of construction work items can cause serious overestimate or underestimate in BQT results. It is necessary to identify what kind of problems can happen and how those problems can be avoided in various construction work items, since the discrepancy of quantity take-off results has great impact on not only cost analysis but also the determination of contract amount and it can cause claims, poor construction quality, cost overruns, and many others later in the construction project. Therefore, this paper focuses the identification of issues and problems of BQT at each construction work item level based on two categorizations of structural works and interior works.

• The Plant Pathology Journal
• /
• 제29권2호
• /
• pp.125-135
• /
• 2013

In agro-ecosystems worldwide, some of the most important and devastating diseases are caused by soil-borne necrotrophic fungal pathogens, against which crop plants generally lack genetic resistance. However, plants have evolved approaches to protect themselves against pathogens by stimulating and supporting specific groups of beneficial microorganisms that have the ability to protect either by direct inhibition of the pathogen or by inducing resistance mechanisms in the plant. One of the best examples of protection of plant roots by antagonistic microbes occurs in soils that are suppressive to take-all disease of wheat. Take-all, caused by Gaeumannomyces graminis var. tritici, is the most economically important root disease of wheat worldwide. Take-all decline (TAD) is the spontaneous decline in incidence and severity of disease after a severe outbreak of take-all during continuous wheat or barley monoculture. TAD occurs worldwide, and in the United States and The Netherlands it results from a build-up of populations of 2,4-diacetylphloroglucinol (2,4-DAPG)-producing fluorescent Pseudomonas spp. during wheat monoculture. The antibiotic 2,4-DAPG has a broad spectrum of activity and is especially active against the take-all pathogen. Based on genotype analysis by repetitive sequence-based-PCR analysis and restriction fragment length polymorphism of phlD, a key 2,4-DAPG biosynthesis gene, at least 22 genotypes of 2,4-DAPG producing fluorescent Pseudomonas spp. have been described worldwide. In this review, we provide an overview of G. graminis var. tritici, the take-all disease, Pseudomonas biocontrol agents, and mechanism of disease suppression.