• Tuberculosis and Respiratory Diseases
• /
• v.45 no.5
• /
• pp.953-961
• /
• 1998

Background : In recent years, lung cancer has been one of most common cause of death in Korea. Despite many physician's high degree of pessimism about the gains made in treatment, progressive improvement in the survival of lung cancer by treatment has occurred, particulary in the early stages of the disease. However, a lot of patients refuse treatment or give up in the fight against the disease. This study was done to evaluate factors influencing the compliance to therapy and to lead in the establishment of special programs to enhance compliance in patients with lung cancer. Methods: The medical records of 903 patients, whose ECOG(Eastern Cooperative Oncology Group) performance status was 3 or less and whose medical record was relatively satisfactory, among 1141 patients diagnosed with lung cancer between January 1989 and December 1996 were reviewed retrospectively. Compliance was classified into three groups based on the degree of compliance with physicians practice guideline: (a) compliants; (b) patients who initially complied but gave up of themselves midway during the course of treatment; (c) noncompliants who refused the treatment. Results: The overall compliance rate was 63.9%, which was progressively increased from 57.3-61.3% in 1989 and 1990 to 64.2-67.5% in 1995 and 1996. Age, education level and occupation of patients bore statistically significant relationship with the compliance but sex, marital status and smoking history did not. The compliance was significantly higher in patients without symptoms than with, and was also significantly higher in patients with good performance status. The compliance was significantly high in patients with NSCLC(non-small cell lung cancer) compared to SCLC(small cell lung cancer), but after exclusion of stage I and II, among NSCLC, which had higher compliance to surgery there was no significant difference of compliance by histology. The compliance was significantly lower in advanced stage. Conclusion: To enhance the compliance, special care including education programs about therapy including complication and prognosis are necessary, especially for educationally and economically disadvantaged patients.

• Tuberculosis and Respiratory Diseases
• /
• v.61 no.1
• /
• pp.26-33
• /
• 2006

Background: Noninvasive positive pressure ventilation(NPPV) has been increasingly used over the past decade in the management of acute or chronic respiratory failure and weaning of mechanical ventilation. We performed this clinical study to evaluate the usefulness of NPPV in patients who developed acute respiratory failure or post-extubation respiratory failure. Methods: We analysed thirty four patients(sixteen males and eighteen females, mean ages 58 years) who applied NPPV(BIPAP S/T, Respironics co., USA) for respiratory failure or weaning difficulty at medical intensive care unit(MICU), emergency room and general ward of a tertiary hospital. We evaluated the underlying causes of respiratory failure, duration of treatment, the degree of adaptation, complication and predictive parameters of successful outcome. Results: The overall success rate of NPPV was seventy-one percent. The duration of NPPV applying time, baseline blood pressure, pulse rate, respiration rate, $PaO_2$, $PaCO_2$, $SaO_2$ were not different between success group and failure group. But, the baseline pH was higher in the success group. Predictors of success were higher baseline pH, patients with underlying disease of COPD, improvement of vital sign and arterial blood gas value after NPPV application. The success rate in patients with post-extubation respiratory failure was eighty percent. There were no serious complication on applying NPPV except minor complications such as facial skin erythema, abdominal distension & dry mouth. Conclusion: NPPV may be effective treatment in patients with acute respiratory failure or post-extubation respiratory failure in selected cases.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.222-231
• /
• 2009

Statements of the problem: Over the past decades, conventional complete dentures were used for various patients although they have incomplete function. Overdentures using dental implants could help the improvement of denture function. Purpose: The purpose of this study was to compare the strains of abutment and bone on implant overdenture between splinted and unsplinted type of prosthesis. Additionally, the strain values of parallel placed implant model and unparallel placed implant model were compared. Material and methods: Two acrylic resin model were prepared and two implants were placed at the canine positions in each model. In the first model, two implant were placed parallel. In the second model, two implants were placed with 10 degree labiolingual divergence. Two types of abutment were connected to the fixtures alternatively. One was splint type of Hader bar, the other was unsplint type of ball abutment. Overdentures were fabricated with corresponding attachment systems and seated on abutments. Strains of abutments and labial bone simulants were measured with electric resistance strain gauges when static load from 100 N to 200 N were applied to overdentures. Results: 1. Splinted type of overdentures using bar and clip showed higher absolute strain values. But the strain was compressive and the load was shared by two implants(P<.05). 2. Unsplinted type overdentures using ball and O-ring showed low absolute strain values(P<.05). 3. Labially inclined implant showed higher tensile strain values in unsplinted type of prosthesis than in splinted type of prosthesis. Lingually inclined implant showed rather low strain values under load(P<.05). 4. Non parallel implant model showed higher absolute strain values than parallel placed implant model comprehensively(P<.05).

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.6
• /
• pp.521-537
• /
• 2012

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2011. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of fluid machinery and fluid flow, thermodynamic cycle, and new and renewable energy. Various topics were presented in the field of fluid machinery and fluid flow. Research issues mainly focused on the rankine cycle in the field of thermodynamic cycle. In the new and renewable energy area, researches were presented on geothermal energy, fuel cell, biogas, reformer, solar water heating system, and metane hydration. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, nanofluids and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer above liquid helium surface in a cryostat, methane hydrate formation, heat and mass transfer in a liquid desiccant dehumidifier, thermoelectric air-cooling system, heat transfer in multiple slot impinging jet, and heat transfer enhancement by protrusion-in-dimples. In the area of pool boiling and condensing heat transfer, researches on pool boiling of water in low-fin and turbo-B surfaces, pool boiling of R245a, convective boiling two-phase flow in trapezoidal microchannels, condensing of FC-72 on pin-finned surfaces, and natural circulation vertical evaporator were actively performed. In the area of nanofluids, thermal characteristics of heat pipes using water-based MWCNT nanofluids and the thermal conductivity and viscosity were measured. In the area of industrial heat exchangers, researches on fin-tube heat exchangers for waste gas heat recovery and Chevron type plate heat exchanger were implemented. (3) Refrigeration systems with alternative refrigerants such as $CO_2$, hydrocarbons, and mixed refrigerants were studied. Heating performance improvement of heat pump systems were tried applying supplementary components such as a refrigerant heater or a solar collector. The effects of frost growth were studied on the operation characteristic of refrigeration systems and the energy performance of various defrost methods were evaluated. The current situation of the domestic cold storage facilities was analyzed and the future demand was predicted. (4) In building mechanical system fields, a variety of studies were conducted to achieve effective consumption of heat and maximize efficiency of heat in buildings. Various researches were performed to maximize performance of mechanical devices and optimize the operation of HVAC systems. (5) In the fields of architectural environment and energy, diverse purposes of studies were conducted such as indoor environment, building energy, and renewable energy. In particular, renewable energy and building energy-related researches have mainly been studied as reflecting the global interests. In addition, various researches have been performed for reducing cooling load in a building using spot exhaust air, natural ventilation and energy efficiency systems.

• Journal of Cadastre & Land InformatiX
• /
• v.50 no.1
• /
• pp.107-123
• /
• 2020

With stabilization of the recent multi-GNSS infrastructure, and as multi-GNSS has been proven to be effective in improving the accuracy of the positioning performance in various industrial sectors. In this study, in view that SF(Single frequency) GNSS receivers are widely used due to the low costs, evaluate effectiveness of SF Real Time Point Positioning(SF-RT-PP) based on four multi-GNSS surveying methods with RTCM-SSR correction streams in static and kinematic modes, and also derive response challenges. Results of applying SSR correction streams, CNES presented good results compared to other SSR streams in 2D coordinate. Looking at the results of the SF-RT-PP surveying using SF signals from multi-GNSS, were able to identify the common cause of large deviations in the altitude components, as well as confirm the importance of signal bias correction according to combinations of different types of satellite signals and ionospheric delay compensation algorithm using undifferenced and uncombined observations. In addition, confirmed that the improvement of the infrastructure of Multi-GNSS allows SF-RT-SPP surveying with only one of the four GNSS satellites. In particular, in the case of code-based SF-RT-SPP measurements using SF signals from GPS satellites only, the difference in the application effect between broadcast ephemeris and SSR correction for satellite orbits/clocks was small, but in the case of ionospheric delay compensation, the use of SBAS correction information provided more than twice the accuracy compared to result of the Klobuchar model. With GPS and GLONASS, both the BDS and GALILEO constellations will be fully deployed in the end of 2020, and the greater benefits from the multi-GNSS integration can be expected. Specially, If RT-ionospheric correction services reflecting regional characteristics and SSR correction information reflecting atmospheric characteristics are carried out in real-time, expected that the utilization of SF-RT-PPP survey technology by multi-GNSS and various demands will be created in various industrial sectors.

• Korean Journal of Plant Resources
• /
• v.27 no.1
• /
• pp.102-109
• /
• 2014

This study was carried out to investigate the effects of diffused light materials on marketable yield and quality of sunlight dried red pepper in plastic film house. The after ripening methods were composed of 3 treatments; using electric bulk dryer (Bulk), sealing house (House), and PE sealing. The diffused light materials were control, tent, shading 35% (Shading net), white polypropylene (PP (white)), and black polypropylene (PP (Black)). The marketable yield was high in order of Bulk as 300 g, House as 275 g, and PE sealing as 112 g. The redness of PE sealing was the highest as 17.85 and that of Bulk was the lowest as 10.65. There was significant difference in redness among the treatments. The moisture content of red pepper was the most rapidly reduced in control, and was the most slowly reduced in Shading net treatment. The marketable yield index was the higher in PP (white) as 114% than control. The redness had a significant difference in PP (Black) and tent compared to the other treatments. The capsaicin content showed the highest as $160mg{\cdot}100g^{-1}$ in PP (white) treatment. Conclusively, the most effective method for sunlight drying red pepper was House with PP (White) treatment. It delayed drying for 2 days but increased marketable yield at 114% than control when sunlight dried red pepper in plastic house. Our results also provided an optimized method for improvement of drying red pepper with sunlight, and will be useful for further drying red pepper research.

• The Journal of the Korean bone and joint tumor society
• /
• v.15 no.1
• /
• pp.34-43
• /
• 2009

Purpose: Glomus tumors are rare benign vascular tumors, usually located in the skin or soft tissue of extremities. Approximately 30-50% of glomus tumors occur in subungal area, but glomus tumors have been described in every location even where glomus bodies are not or rarely present. The purpose of this study was to identify clinical, histologic and MRI characteristics of soft tissue glomus tumor. Materials and Methods: Between 1993 and 2008, eight patients underwent surgery of soft tissue Glomus tumor at our institution. Exclusion criteria were patients with Glomus tumors in digits, stomach, trachea and glomus tympanicum. We analyzed medical records, interviews, physical examinations, MR findings and histolocial types retrospectively. Results: There were four men and four women. The mean age was fourty-seven years. The mean prevalence time was eight-point-nine years. In the classic triad of symptoms, all eight patients had pain and tenderness. Two patients complained of cold sensitivity. Two showed skin color changes. After surgery, two showed symptom improvement (VAS $9^{\circ}{\rightarrow}8$, $8^{\circ}{\rightarrow}5$) and?six showed complete disappearance of symptoms. Slightly symptom improvemented (VAS $9^{\circ}{\rightarrow}8$) one had additional surgery two times after first surgery due to relapse/remaining Glomus tumor. The mean size was 13.9 mm. In histology, six were 'solid glomus tumor', one was a mixture of 'solid glomus tumor' and 'lomangioma' and one was 'malignant glomus tumor'. MR findings showed isointense signal on T1 image, high signal on T2 image and strong enhancement on the Gadolinium enhanced image. Conclusion: Glomus tumor has low recurrence rate and malignant change, rapid diagnosis and surgical excision is critical in treatment to prevent unnecessary pain of patient.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.1 s.116
• /
• pp.62-75
• /
• 2007

This paper describes a shaped-beam antenna for increasing the antenna gain of a radiating element. The proposed antenna structure is composed of an exciting element and a multi-layered disk array structure(MDAS). The stack micro-strip patch elements were used as the exciter for effectively radiating the electromagnetic power to the MDAS over the broadband, and finite metallic disk array elements - which give the role of a director for shaping the antenna beam with the high gain - were finitely and periodically layered onto it. The efficient power coupling between the exciter and the MDAS should be carried out in such a way that the proposed antenna has a high gain characteristic. The design parameters of the exciter and the MDAS should be optimized together to meet the required specifications to meet the required specifications. In this study, a shaped-beam antenna with high gain was optimally designed under the operating conditions with a linear polarization and the frequency band of $9.6{\sim}10.4\;GHz$. Two methods constructed using thin dielectric film and dielectric foam materials respectively were also proposed in order to implement the MBAS of the antenna. In particular, through the computer simulation process, the electrical performance variations of the antenna with the MDAS realized by the thin dielectric film materials were shown according to the number of disk array elements in the stack layer. Two kinds of antenna breadboard with the MDAS realized with the thin dielectric film and dielectric foam materials were fabricated, but experimentation was conducted only on the antenna breadboard(Type 1) with the MDAS realized with the thin dielectric film materials according to the number of disk array elements in the stack layer in order to compare it with the electrical performance variations obtained during the simulation. The measured antenna gain performance was found to be in good agreement with the simulated one, and showed the periodicity of the antenna gain variations according to the stack layer number of the disk array elements. The electrical performance of the Type 1 antenna was measured at the center frequency of 10 GHz. As the disk away elements became the ten stacks, a maximum antenna gain of 15.65 dBi was obtained, and the measured return loss was not less than 11.4 dB within the operating band. Therefore, a 5 dB gain improvement of the Type 1 antenna can be obtained by the MDAS that is excited by the stack microstrip patch elements. As the disk array elements became the twelve stacks, the antenna gain of the Type 1 was measured to be 1.35 dB more than the antenna gain of the Type 2 by the outer dielectric ring effect, and the 3 dB beam widths measured from the two antenna breadboards were about $28^{\circ}$ and $36^{\circ}$ respectively.

• Journal of Gastric Cancer
• /
• v.8 no.4
• /
• pp.232-236
• /
• 2008

Purpose: Laparoscopic surgery for gastric cancer was introduced in the past decade because it was considered less invasive than open surgery, and this results in less postoperative pain, faster recovery and an improved quality of life. Several studies have demonstrated the safety and feasibility of this procedure. We examined the outcome of performing laparoscopic surgery for gastric cancer over the last two year. Materials and Methods: From April 2004 to December 2006, 329 patients with gastric adenocarcinoma underwent a laparoscopy-assisted distal gastrectomy with lymph node dissection. The data was retrospectively reviewed in terms of the clinicopathologic findings, the perioperative outcomes and the complications. Results: The total patient group was comprised 196 men (59.6%) and 133 women (40.4%). The mean BMI was 23.6 and the mean tumor size was 2.7 cm. The mean number of harvested lymph node was 22.7, and this was 18.6 before 30 cases and 23.1 after 30 cases, and the difference was significant (P=0.02). The mean operation time was 180.9 min, and this was than 287.9 min before 30 cases and 170.2 min after 30 cases. After 30 cases, there was a significant improvement of the operation time (P<0.01). The mean incision length after 30 cases was shorter than that before 30 cases (P<0.01). Postoperative complications occurred in 24 (7.3%) of 329 patients and there was no conversion to open surgery. Conclusion: Even though the LADG was accompanied by a difficult learning curve, we successfully performed 329 LADG procedures over the past 2 years and we believe that LADG is a safe, feasible operation for treating most early gastric cancers (EGC).

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.4
• /
• pp.19-28
• /
• 2020

The Urban Heat Island (UHI) Effect has intensified due to urbanization and heat management at the urban level is treated as an important issue. Green space improvement projects and environmental policies are being implemented as a way to alleviate Urban Heat Islands. Several studies have been conducted to analyze the correlation between urban green areas and heat with linear regression models. However, linear regression models have limitations explaining the correlation between heat and the multitude of variables as heat is a result of a combination of non-linear factors. This study evaluated the Heat Island alleviating effects in Seoul during the summer by using a deep neural network model methodology, which has strengths in areas where it is difficult to analyze data with existing statistical analysis methods due to variable factors and a large amount of data. Wide-area data was acquired using Landsat 8. Seoul was divided into a grid (30m × 30m) and the heat island reduction variables were enter in each grid space to create a data structure that is needed for the construction of a deep neural network using ArcGIS 10.7 and Python3.7 with Keras. This deep neural network was used to analyze the correlation between land surface temperature and the variables. We confirmed that the deep neural network model has high explanatory accuracy. It was found that the cooling effect by NDVI was the greatest, and cooling effects due to the park size and green space proximity were also shown. Previous studies showed that the cooling effects related to park size was 2℃-3℃, and the proximity effect was found to lower the temperature 0.3℃-2.3℃. There is a possibility of overestimation of the results of previous studies. The results of this study can provide objective information for the justification and more effective formation of new urban green areas to alleviate the Urban Heat Island phenomenon in the future.