• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.205-210
• /
• 2013

Cycle-to-cycle variation has long been recognized as limiting the range of operating conditions of spark ignition engines, in particular, under lean and highly diluted operation conditions. At a part load, some of the cycles tend to knock, while others may have incomplete combustion by the time the exhaust valve opens. An experimental study has been performed in order to evaluate the relative contribution of several relevant parameters on the cyclic variability in spark ignition engines. In general, the stability of engine operation is improved with fuel injector according to the optimal injection timing, but the stability of engine operation at idle is not improved compared with a practical gasoline engine. In this study, we investigated the relationship of the effect of operating conditions for the stability at low speed and load.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.6 s.249
• /
• pp.615-621
• /
• 2006

Increased application of optical disks requires more improved dynamic stability of rotating disks. In this study, a new concept of controlling the processing conditions of injection molded disks was developed to improve vibration characteristics. The critical speed, which shows stiffness and dynamic stability of disk, is affected by the residual stress distribution; this varies as functions of distance from the gate and processing condition. The critical speed of disk was calculated with the initial stress taken into consideration, which was determined from injection molding simulation. Choosing melt temperature, mold temperature, filling speed and packing pressure as design parameters, critical speed is maximized with the method of response surface. It is shown that the stability of injection molded disk has been improved for the new condition obtained as a result of the study proposed.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.589-596
• /
• 2006

An improved numerical method to obtain the exact element stiffness matrix is newly proposed to perform the spatially coupled elastic and stability analyses of non-symmetric thin-walled beam-columns with two-types of elastic foundation. This method overcomes drawbacks of the previous method to evaluate the exact stiffness matrix for the spatially coupled stability analysis of thin-walled beam-column. This numerical technique is firstly accomplished via a generalized eigenproblem associated with 14 displacement parameters by transforming equilibrium equations to a set of first order simultaneous ordinary differential equations. Then exact displacement functions are constructed by combining eigensolutions and polynomial solutions corresponding to non-zero and zero eigenvalues, respectively. Consequently an exact stiffness matrix is evaluated by applying the member force-deformation relationships to these displacement functions.

• Journal of the Korean Society of Industry Convergence
• /
• v.12 no.1
• /
• pp.43-50
• /
• 2009

The manufacturing process of the semiconductor is guided by the controller, which is supposed to sense the unexpected shocks and/or vibrations to shutdown the hard disk and the whole system in order to prevent the malfunction. This feature of controller would shutdown the system due to the instability of the controller itself as well as the instability of the manufacturing system. And consequently will cause significant losses. In this study the structure of a controller has been investigated to find ways to suppress the vibrations from the structure. The frequency response test and the computer simulation has been implemented to find the structure with improved stability. The result of the study shows that the relatively simple design alterations can eliminate most of the vibrations.

• Journal of the Korean Mathematical Society
• /
• v.49 no.3
• /
• pp.515-536
• /
• 2012

This work focuses on the general decay stability of nonlinear stochastic differential equations with unbounded delay. A Razumikhin-type theorem is first established to obtain the moment stability but without almost sure stability. Then an improved edition is presented to derive not only the moment stability but also the almost sure stability, while existing Razumikhin-type theorems aim at only the moment stability. By virtue of the $M$-matrix techniques, we further develop the aforementioned Razumikhin-type theorems to be easily implementable. Two examples are given for illustration.

• Journal of the Korean Society of Industry Convergence
• /
• v.12 no.2
• /
• pp.91-97
• /
• 2009

The productivity and the precision machining are the major concerns of the machine tools, and the importance of those features will be even more emphasized with the needs of the modern industries. In this paper the dynamic properties of a lathe have been investigated through the frequency analysis test and the computer simulation to minimize the transmission of vibration generated during the machining process. The modifications have been applied to the original structure to suppress the vibration transmission and further for the structure to achieve less vibrations and higher precision machining. The result shows that the machine can have much less vibrations with simple design alterations for minor expenses, the result can also be readily applied to many similar machines for improved stability.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.8
• /
• pp.1032-1042
• /
• 1998

The purpose of this study is to measure, compare, and investigate the physical properties of rayon/cotton blend fabrics treated with cellulase and cellulase & specific degeneration silicon and to present basic data which is in development a value-added fabric. The results are as follows. The condition for the treatment of cellulase was at 55$^{\circ}C$, pH 4 and the weight loss increased as the concentration of cellulase and the treated time increased. On treatment with cellulase, the crossectional view & longitudinal view of fiber noticed remarkable crack as weight loss increased and tensile strength and elongation decreased, and pilling was enhanced remarkably. KOSHI was increased, NUMERI and FUKURAMI were decreased as weight loss increased. In the basic characteristic value of clothing wearning, shape stability and drapability were decreased, but air content was improved. On treatment with cellulase & silicon, the degree of damage in the crossectional view & longitudinal view of the fiber reduced. Tensile strength, elongation, moisture regain improved. KOSHI and FUKURAMI were reduced, NUMERI was improved rather than when it was treated with cellulase. Therefore handle was improved. In the basic characteristic value of the clothing wearing, shape stability, air content, drapability were improved.

• KIEAE Journal
• /
• v.9 no.6
• /
• pp.37-44
• /
• 2009

This study conducted an evaluation of the streetscape improvement project of the Gwangbok Street through analysis of correlations between psychological consciousness and physical elements in the street by comparing selected pictures of streetscape before and after the project. This work has conducted an analysis of Psychological characteristics by semantic differential method and an analysis of physical elements which influence psychological characteristics by regression analysis. According to the results of psychological analysis, the senses of interest, orderliness, esthetic and preference were highly improved in A district and the senses of openess, stability, orderliness were highly improved in B district. The results of analyzing physical elements influencing the improvement of these psychological consciousness in A district elucidated ; 1) the works of improving signboard and elevation of the building affected the whole these psychological consciousness, 2) the work of planting trees, making plant rests in the street improved the senses of orderliness, esthetic, 3) the work of changing finishing materials in the street enhanced the senses of esthetic, preference, 4) the work of adjusting the width between the road and the pavement, the work of improving traffic enhanced the senses of interest, preference. In the meantime in B district, the works of improving signboard and elevation of the building and those of planting trees, making plant rests in the street improved the senses of openess and orderliness. Also the work of improving traffic enhanced the senses of openess, stability and the work of expanding the pavement, that of changing finishing materials in the street improved the senses of openess, stability, orderliness.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.7
• /
• pp.1841-1857
• /
• 2023

CenterNet, a novel object detection algorithm without anchor based on key points, regards the object as a single center point for prediction and directly regresses the object's height and width. However, because the objects have different sizes, directly regressing their height and width will make the model difficult to converge and lose the intrinsic relationship between object's width and height, thereby reducing the stability of the model and the consistency of prediction accuracy. For this problem, we proposed an algorithm based on the regression of the diagonal half-length and the center angle, which significantly compresses the solution space of the regression components and enhances the intrinsic relationship between the decoded components. First, encode the object's width and height into the diagonal half-length and the center angle, where the center angle is the angle between the diagonal and the vertical centreline. Secondly, the predicted diagonal half-length and center angle are decoded into two length components. Finally, the position of the object bounding box can be accurately obtained by combining the corresponding center point coordinates. Experiments show that, when using CenterNet as the improved baseline and resnet50 as the Backbone, the improved model achieved 81.6% and 79.7% mAP on the VOC 2007 and 2012 test sets, respectively. When using Hourglass-104 as the Backbone, the improved model achieved 43.3% mAP on the COCO 2017 test sets. Compared with CenterNet, the improved model has a faster convergence rate and significantly improved the stability and prediction accuracy.

• Tribology and Lubricants
• /
• v.11 no.1
• /
• pp.50-57
• /
• 1995

When engine oil is used under severe running condition, the Lubricational characteristics is very important. I have studied the Lubricational characteristics with Compound Additives of engine oil for the Falex wear test machine. Adding detergent (Ca-phenate) to engine oil, the seizure is more improved than in case of non-adding, and adding Zn-DTP (Zinc dialkyl dithio phosphate), the extreme pressure property is excellent at the high load. But when the PTFE (Polytetra Fluoro Ethylene) and MoS$_{2}$ (Molybdenum disulfide) are added, the temperature characteristics and the anti-wear property become excellent because the stability can be maintained in a high temperature. The result are as follows, it can be improved that when the compound of the Ca-phenate and Zn-DTP, MoS$_{2}$, PTFE, etc. was added to engine oil, the lubrication characteristics become better. It is argued that it is improved because of excellence of the anti-wear, the extreame pressure properties and the heat stability.