• 전기학회논문지
• /
• 제63권1호
• /
• pp.48-53
• /
• 2014

Generally, the usage motor in the vehicle is exposed to highly ambient temperature and large vibration according to repeatedly starting and stopping during very short time. So, in this paper, the rotor shape design was performed to improve demagnetization endurance by considering starting current of Brushless DC Motor (BLDCM) through Finite Element Method(FEM). As a result, the end of Permanent Magnet (PM) in the basic model was occurring a partial irreversible demagnetization by starting current. To solve this problem, the installing flux barrier was limited to flux line on the core. Accordingly, demagnetization endurance and operating characteristics were improved.

• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.945-950
• /
• 2013

This paper deals with the ellipse permanent magnet machines for the minimization of torque ripple based on electromagnetic field theory. On the basis of a magnetic vector potential and a two dimensional (2-D) polar system, analytical solutions for flux density due to permanent magnet (PM) and current are obtained. In particular, the analytical solutions for mathematical expressions of magnets with different circumferential thicknesses can be solved introducing improved magnetization modeling techniques. The analytical results are validated extensively be nonlinear finite element solutions, a reduction of torque ripple can be achieved.

• 펄프종이기술
• /
• 제32권1호
• /
• pp.41-47
• /
• 2000

The objective of this study is to assess the possibility of ozone as an environmentally friendly new deinking alternative for conventional deinking method. It is well known that the white ledger is very difficult to deink because the toner ink has the peculiar shape and size. Ozonization could remove the ink particles above 300 microns and thus improved the ink removal efficiency. Ozonization also improved the WRV of recycled fiber and apparent density, scott bond strength , breaking length, double fold and tear index. Thus, we believe that ozonization could be used as a deinking means of white ledger instead of the convention미 deinking method.

• Structural Engineering and Mechanics
• /
• 제70권2호
• /
• pp.209-219
• /
• 2019

By normalizing the internal hysteresis variable and eliminating the redundant parameter, the normalized Bouc-Wen model is considered to be an improved and more reasonable form of the Bouc-Wen model. In order to facilitate application and further research of the normalized Bouc-Wen model, some key aspects of the model need to be uncovered. In this paper, hysteresis characterization of the normalized Bouc-Wen model is first studied with respect to the model parameters, which reveals the influence of each model parameter to the shape of the hysteresis loops. The parameter identification scheme is then proposed based on an improved genetic algorithm (IGA), and verified by experimental test data. It is proved that the proposed method can be an efficacious tool for identification of the model parameters by matching the reconstructed hysteresis loops with the target hysteresis loops. Meanwhile, the IGA is shown to outperform the standard GA. Finally, a simplified identification method is proposed based on parameter sensitivity, which indicates that the efficiency of the identification process can be greatly enhanced while maintaining comparable accuracy if the low-sensitivity parameters are reasonably restricted to narrower ranges.

• 한국분말재료학회지
• /
• 제28권1호
• /
• pp.1-6
• /
• 2021

Accurate and effective powder compaction analyses are performed for brittle materials such as graphite, utilized as a solid lubricant, by using the discrete element method (DEM). The reliability of the DEM analysis is confirmed by comparing the results of graphite powder compaction analyses using the DEM particle bonding contact model and particle non-bonding contact model with those from the powder compaction experiment under the same conditions. To improve the characteristics, the parameters influencing the compaction properties of the metal-graphite mixtures are explored. The compressibility increases as the size distribution of the graphite powder increases, where the shape of the graphite particles is uniform. The improved compaction characteristics of the metal-graphite (bonding model) mixtures are further verified by the stress transmission and compressive force distribution between the top and bottom punches. It is confirmed that the application of graphite (bonding model) powders resulted in improved stress transmission and compressive force distribution of 24% and 85%, respectively.

• 로봇학회논문지
• /
• 제16권1호
• /
• pp.23-28
• /
• 2021

The gripper with a soft pneumatic actuator uses a soft material, unlike the gripper that uses a rigid body, so it is safer and lighter to interact with objects without advanced control technology. Among the soft pneumatic actuators that have been studied, PneuNets actuators have bellows shape, which enable quick operation and complete bending with only small material deformation at low pressure. In this study, we suggested improved form of PneuNets actuators to obtain the performance of the soft actuator that a larger bending angle and larger bending force at a small pressure. An experiment was designed and conducted to measure the bending angle and bending force according to the pressure. As a result, it was confirmed through experiments that the improved model has a maximum bending angle at a pressure of 5 kPa lower than that of the previous model, and a maximum bending force of 1.97 times at the same pressure.

• Nuclear Engineering and Technology
• /
• 제53권1호
• /
• pp.111-120
• /
• 2021

During the core disruptive accident (CDA) of sodium-cooled fast reactor (SFR), the molten fuel and steel are solidified into debris particles, which form debris bed in the lower plenum. When the boiling occurs inside debris bed, the flow of coolant and vapor makes the debris particles relocated and the bed flattened, which called debris bed relocation. Because the thickness of debris bed has great influence on the cooling ability of fuel debris in low plenum, it's very necessary to evaluate the transient changes of the shape and thickness in relocation behavior for CDA simulation analysis. To simulate relocation behavior, a large number of debris bed relocation experiments were carried out by improved bottom gas-injection experimental method in this paper. The effects of different experimental factors on the relocation process were studied from the experiments. The experimental data were also used to further evaluate a semi-empirical onset model for predicting relocation.

• Archives of Pharmacal Research
• /
• 제7권2호
• /
• pp.145-151
• /
• 1984

A novel agglomeration technique, termed "Spherical Crystallization Process", which can transform directly the fine crystals produced in the crystallization or the reaction process into a spherical shape was developed. By this technique, needle like crystals such as salicylic acid were transformed into free flowing and directly compressible agglomerates. Sphericaly agglomerated aminophyline crystals were obtained directly from the reaction system, which could reduce the preparation processes, e. g. synthesis, crystallization and agglomeration, into only one step. Sodium theophyline monohydrate agglomerates were prepared by salting out, the rate process of which was described by a first order kinetics. Agglomerated crystals of ndw complex of indo-methacin-mepirizole were prepare with this technique; an improved therapeutic effect of the resultant crystals was expected. expected.

• 한국생산제조학회지
• /
• 제5권2호
• /
• pp.90-97
• /
• 1996

The purpose of this study is the development of a lathe which can cut any pistons of oval shape with high speed, accuracy and precision by CNC (Computer Numerical Control) method. Yaxis which is the mechanism of position determination with high speed response has been added to the CNC lathe and ovality and profile has been cut under the synchronous control of C-Y-Z axes. In the case of ovality of ø 0.5mm. the productivity can be improved up to 1500rpm by high speed cutting than modeling method.

• 대한족부족관절학회지
• /
• 제12권1호
• /
• pp.100-105
• /
• 2008

Partial toenail ablation on both sides of the great toenail, unfolding the severely curved toenail, and application of a simple device for maintaining the unfolded state of the incurved toenail is described to treat severely incurved toenails (pincer nails). This technique alleviated symptoms and improved the shape of severely curved toenails of the greater toe.