• 대한치과보철학회지
• /
• 제39권2호
• /
• pp.146-156
• /
• 2001

The purpose of this study was twofold. One was to evaluate the wettability of 4 elastomeric impression materials on tooth and different kinds of filling materials. The other was to identify the effect of topical surfactants sprayed on the surface of each impression. The elastomeric impression mate rials used in this experimental study were one polyether(Impregum F) and three polyvinyl siloxanes(Provil novo, Zerosil, Imprint). The abutments were prepared for 3/4 crown or onlay on the extracted human first molar. The filling materials used in this study for the duplication of prepared abutment were composite resin, amalgam, and casting metal. Impression was taken by manufacturer's recommendations and the number of voids on the impression surface was counted. The topical surfactants were Spannex $II^{(R)}$ and $Cohere^{(R)}$. The wettability was evaluated by comparing the number of voids between non-treated group and treated groups. The results were as follows : 1. $Zerosil^{(R)}$ showed the least number of voids on the impression surface. The number of voids increased in order of Provil $novo^{(R)}$, Impregum $F^{(R)}$, and $Imprint^{(R)}$. 2. Impregum $F^{(R)}$ and $Zerosil^{(R)}$ showed the least number of voids on the surface of dental stone master cast. The number is inclosed in order of Provil $novo^{(R)}$ and Imprint 3. When abutment material is tooth, the number of voids on the surface of master cast was smallest compared with that of other abutment materials. The number of voids increased in order of casting metal, amalgam and composite resin 4. The number of voids on the surface of the dental stone master cast was smallest when Spannex $II^{(R)}$ was used, followed by $Cohere^{(R)}$ treated group and non-treated group. These results suggest that the difference in wettability caused by the types of rubber base impression materials as well as abutment materials can affect the number of voids. And the use of topical surfactant for rubber base impression materials can improve the wettability of the materials and enhance the accurate master cast which has fewer surface voids.

• 대한치과보철학회지
• /
• 제34권2호
• /
• pp.266-276
• /
• 1996

Numerous factors are known to affect the accuracy of elastomeric impression materials. Factor often overlooked is the quality of the bond between putty and wash during corrective reline impression technique. The putty-wash bond strength must be strong enough to over-come the local stress at putty-wash interface. It is not always possible to avoid saliva contamination in making corrective wash impres-sion. And putty preliminary impression material con be used as a template for provisional restoration. Human saliva and the residual monomer of autopolymerizing acrylic resin are thought to affect the bond strength and the failure type. This study examined the effect of contaminants like human saliva, and residual resin monomer on the putty-wash bond strength and the effectiveness of treatment. 1. Of the tested three brands of Vinyl Polysiloxane impession meterial, Express Exhibited the greatest bond strength followed by Eamix and Perfect showed the lowest putty-wah bond strength. 2. Coating the putty substrates with human saliva did not produce decreased failure load in all the breands of Vinyl Polysiloxane impression meterail. 3. Of the three brands of VPS impression material that were exposed to methhylmethacry-late resin(Jet), only the putty-wash bond strength of the Perfect group diminished signifi-cantly. Moreover, all the specimens from group C of Perfect exhibited adhesive failure. 4. Exposing the substrates to ethylmethacrylate resin(SNAP. diminished the putty-wash bond strength significantly. With Perfect and Examix, failure occurred cohesively through the light-body, whereas with Express, failure occurred adhesive-cohesively. 5. Removing approximately 1mm thickness of the contaminated putty interface was the most effective treatment in countering the undesirable effect caused by residual resin monomer. The putty-wash bond strength of the groups that were treated with 1mm even putty reduction was not significantly different from those of control groups. With Perfect and Examix, cleaning the specimens with gauze soaked in 70% isopropyl alcohol increased the putty-wash bond strength, but was not as effective as 1mm even reduction of contaminated putty substrates. With Express, 70% isoproryl alcohol treatment exhibi0ted comparable putty-wash bond strength to that of control group.

• 한국의류학회지
• /
• 제26권8호
• /
• pp.1216-1227
• /
• 2002

The objective in the part H of this study was to investigate the effects of materials, sleeves, trimming, and perceivers gender on impression formation. Stimuli consisted of 13 color photographs of a female model wearing a wedding dress which were manipulated according to clothing cues. A semantic differential sale of 4 dimensions was used. These were attractiveness, neatness, femininity, and prettiness. Samples were 312 males and females. For the effect of sleeves, there were significant main effects in attractiveness, femininity, neatness, and prettiness. Three-quarters lace ruffled sleeves increased the perception of positive attractiveness, femininity, and prettiness. Flounced sleeves had a positive effect on the perception of neatness. Long-tight sleeves had a negative effect on the perception of attractiveness, femininity, and prettiness. Sleeveless dresses increased the perception of negative neatness. There was an interaction effect between sleeves and the perceivers gender on neatness. For the onぉ of material, there were significant main effects in neatness, femininity, and prettiness. Solid cloth had a positive effect on the perception of neatness and negatively on prettiness. The combination of lace and solid cloth increased the perception of positive femininity and prettiness. lace had a negative effect on the perception of neatness. Satin increased the perception of negative femininity. There was an interaction effect between material and perceivers gender on prettiness. The main effect of trimmings was its effect on prettiness. Ribbons increased the perception of positive prettiness. Not having any trimmings had a negative effect on the perception of prettiness. There was an interaction effect between timings and the perceivers gender on neatness. The results of this study confirm that image perception of wedding dresses becomes different according to the materials, details, and perceiver's gender.

• 대한방사선치료학회지
• /
• 제23권1호
• /
• pp.41-49
• /
• 2011

목 적: 구강암 환자의 방사선 치료시 기존 강내 충전물인 Mouth piece, Putty 인상제와 자체 제작한 Paraffin Wax를 비교하여 그 유용성을 알아보고자 한다. 대상 및 방법: 재료별 충전물을 $10{\times}10{\times}1cm$의 크기로 제작하여 물(물 등가 팬텀)을 기준으로 선량 감쇠율을 측정하였으며, 구강암 환자 중 충전물별 각 2명씩을 대상으로 Aria system의 offline review 프로그램으로 DRR (Digitally Reconstructed Radiograph)과 각 5회 촬영한 Portal vision을 비교하여 고정기구로서의 재현성을 확인하였다. 원통형 팬텀(phantom)을 제작하여 치료 계획시 불가피 하게 충전물이 조사야 내에 포함되는 경우의 흡수선량 변화에 따른 MU (monitor unit) 차이를 비교하였다. 결 과: 선량감쇠율은 Mouth piece (Air) 6 MV +3.5%, 10 MV -0.7%, Paraffin 6 MV +0.34%, 10 MV +0.31%, Putty 6 MV -2.31%, 10 MV -1.76%로 측정되었다. 자세 재현성은 Mouth piece ${\pm}3mm$, Paraffin ${\pm}2mm$, Putty ${\pm}2mm$의 오차를 나타내었다. $5{\times}4{\times}2.5cm$ 크기의 충전물이 조사야 내에 포함되는 경우의 흡수선량 변화에 따른 선속의 MU 차이는 6 MV 계산시 Water 232 MU를 기준으로 백분율 환산시 Paraffin -0.9% (230 MU), Putty +7.8% (250 MU)의 증감을 나타내었다. 결 론: 기존 Mouth piece의 경우 상악과 하악을 이격시킴에는 문제가 없으나 구강내 구조물을 반영하지 못해 재현성을 확신하지 못하고 공동과 조직 사이의 계면선량이 감소하는 단점이 있었다. 그에 반해 Putty 인상제는 자세재현성이나 구강을 충전함에 있어 우수함을 알 수 있으나, 물에 비해 두께 1 cm당 약 -2.3%의 선량감쇠가 발생해 선량계획에 있어 불리하고 정상조직에 불필요한 과선량이 조사되었다. Paraffin의 경우 지방과 유사한 조직등가물질로 선량감쇠가 적고, 구강내 구조물을 반영한 맞춤형 제작이 가능해 재현성이 우수하며 강내 공동을 충분히 충전시켜 병변에 목적한 선량을 전달하는데 가장 이상적인 재료라 사료된다.

• The Journal of Advanced Prosthodontics
• /
• 제2권1호
• /
• pp.25-31
• /
• 2010

PURPOSE. This study compared the accuracy of an abutment-framework (A-F) taken with open tray impression technique combining cement-on crown abutments, a metal framework and resin cement to closed tray and resin-splinted open tray impression techniques for the 3-implant definitive casts. The effect of angulation on the accuracy of these 3 techniques was also evaluated. MATERIAL AND METHODS. Three definitive casts, each with 3 linearly positioned implant analogs at relative angulations 0, 30, and 40 degrees, were fabricated with passively fitted corresponding reference frameworks. Ten impressions were made and poured, using each of the 3 techniques on each of the 3 definitive casts. To record the vertical gap between reference frameworks and analogs in duplicate casts, a light microscope with image processing was used. Data were analyzed by two-way analysis of variance and the Tukey test. RESULTS. The open tray techniques showed significantly smaller vertical gaps compare to closed tray technique (P < .05). The closed tray and the resin-splinted open tray technique showed significantly different vertical gaps according to the angulation of implant (P < .05), but the A-F impression technique did not (P > .05). CONCLUSION. The accuracy of the A-F impression technique was superior to that of conventional techniques, and was not affected by the angulation of the implants.

• 대한치과보철학회지
• /
• 제39권4호
• /
• pp.351-365
• /
• 2001

For accurate impression taking, accurate impression material, solid individual tray, and bond strength between impression materials and resin tray are important factors. The purpose of this study was to evaluate tensile bond strength of rubber impression materials to various tray resin materials. This study tested the time dependent tensile bond strength between commercial brands or poly ether, polysulfide, additional silicone impression materials and commercial brands of self curing tray resin. light activited tray resin when applying adhesive Resin specimens were made with 20mm in diameter, 2mm in thickness. 1 made total 360 specimens, 10 per each group and the tensile bond strength was measured by using the Instron($M100EC^{(R)}$, Mecmesin Co., England). The results were as follows ; Comparisons of various impression materials. 1. In case of Impregum $F^{(R)}$, the bond strength of tray resin was decreased in order of SR $Ivolen^{(R)}$, Ostron $100^{(R)}$ Instant tray $mix^{(R)}$, $Lightplast^{(R)}$. All groups excluding Ostron $100^{(R)}$, Instant tray $mix^{(R)}$ are significant difference (p<0.05). Drying time after applying adhesive, the tensile bond strength of tray resin was insignificantly decreased in order of 10 min drying time group. 1 min drying time group. 5 min drying time group. 2. In case of Permlastic $regular^{(R)}$ the bond strength of tray resin was insignificantly decreased in order of Ostron $100^{(R)}$. SR $Ivolen^{(R)}$, Instant tray $mix^{(R)}$ $Lightplast^{(R)}$. About drying time after applying adhesive, the tensile bond strength of tray resin was significantly decreased in order of 5 min drying time group, 10 min drying time group, 1 min drying time group(p<0.05). 3. In case of Exaflex $regular^{(R)}$. the bond strength of tray resin was decreased in order of $Lightplast^{(R)}$, SR $Ivolen^{(R)}$, Instant tray $mix^{(R)}$, Ostron $100^{(R)}$. $Lightplast^{(R)}$ was significant difference(p<0.05). About drying time after applying adhesive, the tensile bond strength of tray resin was decreased in order of 5 min drying time group, 10 min drying time group, 1 min drying time group(p<0.05). Especially 5 min ding time group was significant difference(p<0.05). According to the results of this study, we can see the greatest tensile bond strength when using Impregrm $F^{(R)}$ and Permlastic $regular^{(R)}$ with self curing tray resin, when using Exaflex $regular^{(R)}$ with light activated tray resin In my opinion, adhesive should be dried more than 5 min before impression taking to achieve the greatest tensile bond strength.

• 대한치과보철학회지
• /
• 제53권4호
• /
• pp.330-336
• /
• 2015

목적: 본 연구의 목적은 치간 유두의 소실로 인해 치아 사이에 언더컷이 존재하는 경우 이것이 인상체의 정확도에 영향을 미치는지 알아보고자 하는 것이다. 재료 및 방법: 2종류의 부가중합형 실리콘 인상재($Extrude^{(R)}$ Wash, $Imprint^{TM}$ II Quick Step Light Body)와 한 종류의 알지네이트 인상재(Cavex Impressional)로 상악 주모형의 인상을 채득하여 얻은 실험모형상의 두 점 사이의 거리를 측정하여 주모형과 비교하여 모형의 변형 정도를 측정하였다. 세 종류의 인상재에서 얻은 실험 모형들을 치간 유두가 존재하는 군과 존재하지 않는 군으로 나눠 총 6개의 군을 평가하였으며, 각 군당 6개의 모형을 측정하였다. 삼차원 광학 스캐너로 실험모형을 스캔한 후, 하나의 모형당 6개의 두 점 사이의 거리를 삼차원 디지털 계측 소프트웨어 상에서 측정하였다. 측정 거리의 변화 정도를 백분율로 계산하여 모형의 변형률을 구하였으며, 이것을 이원분산분석을 이용하여 유의수준 .05에서 분석하였다. 결과: 측정거리 6개 중 3개에서 인상재에 따라 통계적으로 유의한 차이를 보였다. 반면, 치간 유두의 존재 여부에 따른 차이는 알지네이트 인상재에서 하나의 측정 거리에서만 유의한 차이를 보였을 뿐(P=.047), 다른 측정거리들과 인상재에서는 통계적으로 유의성 있는 차이를 나타내지 않았다. 결론: 치간 유두의 소실로 인한 언더컷의 존재가 부가중합형 실리콘 인상재와 알지네이트 인상재의 체적 정확도에 미치는 영향은 크지 않았다.

• 대한치과보철학회지
• /
• 제37권3호
• /
• pp.383-394
• /
• 1999

The indirect technique for making cast restoration requires that dies be as accurate and durable as possible. Currently, stone is the most commonly used material for die. However, it has some problems such as the weakness in its strength and low abrasion resistance. Recently, epoxy resin die systems have become available. The purpose of this study was to examine two commercially available resin die systems and evaluate some characteristics for their clinical performance. This study evaluated the dimensional accuracy of epoxy resins and their wettability with impression materials. In this study, the first experiment was about dimensional accuracy of different die materials. The master model was made of stainless steel. 10 models were made of two epoxy resins (Die-epoxy, Tri-epoxy) and a die stone (Fujirock) each. Occlusal diameter (Dimension I), occluso-gingival height (Dimension II), and interabutment distance (Dimension III) were measured in each model. Next, the contact angles of die materials with impression materials were observed. The blocks were made of polyether, hydrophilic additional silicone, polysulfide impression materials. By drop-ping the same amount (0.05ml) of Tri-epoxy, Die-epoxy, and die stone on the blocks, 10 samples of each die material were made. After setting of materials, the contact angles were measured. The results of this study were as follows. 1. The expansion of stone die and the shrinkage of resin dies in occlusal diameter were observed, and stone and Tri-epoxy were expanded and Die-epoxy was shrinked in occluso-gingival height. There was little change among materials in interabutment distance (p<0.05). 2. In comparison with the master model Tri-epoxy had the least variation in measurement of the three die systems examined. Die-epoxy was next, and die stone showed the greatest variation. 3. The compatibility of die stone for polyether, hydrophilic additional silicone, polysulfide decreased in order, wherease epoxy materials had the decreased compatibility for polyether and polysulnde, hydrophilic additional silicone in order. It was not statistically different between polyether and polysulfide (p<0.05). 4. The contact angles of Tri-epoxy, Die-epoxy, die stone were getting bigger in order.

• 한국실내디자인학회논문집
• /
• 제20권1호
• /
• pp.33-42
• /
• 2011

This study, by applying the experiential and psychological thought category of "impression" as the space design strategy for drawing out "sensitivity," aims to break down the psychological mechanism forming the image held by the subject, and based on such segmentation, seek and strategize an effective design methodology. The subject's memory, pure sensation, and movement sensation are set as the preceding determinants comprising the psychological mechanism of space impression. The control determinants for achieving activation of psychological effect are reinterpreted as the relations of memory-cognition, sensation-perception, and movement-sensation and categorized into a cognitive strategy based on association, metaphor and remembrance; a direct sensation strategy based on formation, superposition and transposition of sensation; and a sensation strategy of process-formation based on expectation organization and reversal, contraction and relaxation. Each strategy is achieved through the formal, material and structural control of architecture. As a restructuring of the design methodology that has been experientially applied, the strategy categorization is important in that, by presenting the usefulness and effect by strategy according to space experience, it makes concrete the basic data that are useful for designing experience of sensitivity.

• 대한치과보철학회지
• /
• 제53권3호
• /
• pp.256-261
• /
• 2015

임플란트 보철물의 경우 무엇보다도 보철물의 정확성이 중요하며 이러한 이유로 인해 인상채득의 정확성을 확인하는 과정이 필수적이다. 그러나 인상재 자체의 오차가 존재하며 모형을 제작하는 과정에서도 오차가 발생하게 된다. 이에 대한 대안으로 구강스캐너를 통한 보철물 제작을 생각해 볼 수 있으며, 최근 구강스캐너와 기존의 인상법 간의 정확성에 있어 통계적으로 유의할만할 차이가 없다는 많은 문헌들이 발표되었다. 따라서 intraoral scanner를 이용하여 기존에 방법에 비해 보다 편하고, 빠르며, 정확한 임플란트 보철물을 제작하는 일련의 과정을 보고하고자 한다.