• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.1
• /
• pp.116-123
• /
• 2000

This paper presents a linearizer using the feedforward loop which can be applied to PCS base-station applications. This linearizer used a IM amplifier and an auxiliary amplifier in order to remove delay lines used in the predistortor using the feedforward technique. The delay line in error loop is changed by the main power amplifier(PA) and the error amplifier is utilized to amplify the error signal which fed to the output of main amplifier. The linearizer was simulated by HP ADS ver 1.1 and fabricated on GML 1000 with thickness of 0.8 mm and dielectric constant of 3.2. Two-tone signals at 1.85 GHz and 1.851 GHz with -7dBm/tone from synthesizers are injected into the main PA. The main PA with a 27 dB gain and a $P_{1dB}$ of 29 dBm(two-tone) was utilized. The reduction of intermodulation distortion (IMD) is around 17 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.11
• /
• pp.1256-1263
• /
• 2012

Assigning different frequency resources among adjacent cells, namely the frequency reuse technique can be utilized to mitigate intercell interference, which is a major cause of performance degradation in cellular systems. Since most of conventional frequency reuse patterns are limited to the two-dimensional environment, the research for the three-dimensional frequency reuse would be beneficial especially for the implementation of femto cells in downtown office buildings. We propose frequency reuse patterns in three-dimensional space and evaluate their performance of each pattern in terms of channel capacity. In particular, we show that the proposed three-dimensional frequency reuse patterns can be applied for carrier-aggregated transmission of LTE-Advanced systems. The performance of the proposed patterns is evaluated using computer simulation.

• International Journal of Concrete Structures and Materials
• /
• v.11 no.2
• /
• pp.343-363
• /
• 2017

The objective of this work was finding out the most advisable testing conditions for an effective and robust characterization of the tensile strength (TS) of concrete disks. The independent variables were the loading geometry, the angle subtended by the contact area, disk diameter and thickness, maximum aggregate size, and the sample compression strength (CS). The effect of the independent variables was studied in a three groups of experiments using a factorial design with two levels and four factors. The likeliest location where failure beginning was calculated using the equations that account for the stress-strain field developed within the disk. The theoretical outcome shows that for failure beginning at the geometric center of the sample, it is necessary for the contact angle in the loading setup to be larger than or equal to a threshold value. Nevertheless, the measured indirect tensile strength must be adjusted to get a close estimate of the uniaxial TS of the material. The correction depends on the loading geometry, and we got their mathematical expression and cross-validated them with the reported in the literature. The experimental results show that a loading geometry with a curved contact area, uniform load distribution over the contact area, loads projected parallel to one another within the disk, and a contact angle bigger of $12^{\circ}$ is the most advisable and robust setup for implementation of BT on concrete disks. This work provides a description of the BT carries on concrete disks and put forward a characterization technique to study costly samples of cement based material that have been enabled to display new and improved properties with nanomaterials.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.4
• /
• pp.295-300
• /
• 2016

Internet of things which helps communication between human and thing and between things by connecting networks on them is developing. Develops of Internet of things, network technique, and smart machine result interest on home network system. In this paper, we suggested a system with the home network to the dormitory using pressure sensors, infrared sensor, ultrasonic sensor, switch, arduino, raspberrypi, android application. Smart dormitory system based on the internet of things provide information whether public things in dormitory like laundry machine, computer, treadmill is being used now, and package is arrived through android application.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.178-185
• /
• 2020

This paper proposes precise time synchronization-based synchronized sampling structure applied HW/SW platform for LAN-based protection of future digital substations. The integrated software of the proposed platform includes IEC 61850 protocol, IEEE 1588 precision time protocol and synchronized sampling structure. The proposed platform expected to provide a basis of an application of future distributed sensing data-based protection and control methods by providing synchronized measurement among IEDs. The implementation of the proposed HW/SW platform technique was performed using TMDXIDK572 multi-core/multi-processor evaluation module and its time synchronization performance and synchronized sampling function were confirmed through the performance tests.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.491-498
• /
• 2001

IN this Paper we propose an encryption algorithm for security in data communication. this algorithm acts encryption operation after the compression of data in order to reduce the transmission time and storage an encryption key is generated by using a parameter. as soon as key value is generated the parameter is transmitted and key is recreated every 26 times of parameter changing. the random number which is a constituent unit of encryption key is stored in a table the table is reorganized when the key is generated 40 times in order to intensity the security of encryption key. the encryption of data is made through the operation process of the generated key and sour data and the decryption performs the revers operation of encryption after getting decryption key by searching the transmitted parameter. as this algorithm is performed lastly it is possible to be used in practice.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.3
• /
• pp.279-287
• /
• 2010

Interior permanent magnet synchronous motor(IPMSM) adjustable speed drives offer significant advantages over induction motor drives in a wide variety of industrial applications such as high power density, high efficiency, improved dynamic performance and reliability. This paper proposes efficiency optimization control of IPMSM drive using adaptive fuzzy learning controller(AFLC). In order to optimize the efficiency the loss minimization algorithm is developed based on motor model and operating condition. The d-axis armature current is utilized to minimize the losses of the IPMSM in a closed loop vector control environment. The design of the current based on adaptive fuzzy control using model reference and the estimation of the speed based on neural network using ANN controller. The controllable electrical loss which consists of the copper loss and the iron loss can be minimized by the optimal control of the armature current. The minimization of loss is possible to realize efficiency optimization control for the proposed IPMSM. The optimal current can be decided according to the operating speed and the load conditions. This paper considers the design and implementation of novel technique of high performance speed control for IPMSM using AFLC. Also, this paper proposes speed control of IPMSM using AFLC1, current control of AFLC2 and AFLC3, and estimation of speed using ANN controller. The proposed control algorithm is applied to IPMSM drive system controlled AFLC, the operating characteristics controlled by efficiency optimization control are examined in detail.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.5
• /
• pp.797-806
• /
• 1995

The Client-Server model is a computing technique that efficiently uses distributed resources via networks. But, generating an application using Client- Server model requires many different expertises to developers in comparison to that of using the centralized computing method. That is, and application developer must be familiar with network programming and GUI(Graphical User Interface) techniques in addition to conventional programming skills. Accordingly, the time and man power have been issued for building a Client-Server system. To alleviate these problem, the Client-Server applications development tools are needed To meet such a need, we developed a GUI based tool, called Hanuri/C, for generating Client-Server application programs. In comparison to existing Client-Server tools, Hanuri/C is reinforced Multimedia facilities, Hanuri/C is reinforced Multimedia facilities. Hanuri/C is considered as a front-end part of distributed system software. That is, Hanuri/C is a Client-Server tool similar to Forth Generation Language(4GL) supporting multimedia application on top of the Distributed Computing environment(DCE). In this paper, we present the design and implementation method of the middleware part of Hanuri/c.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.3
• /
• pp.767-774
• /
• 1997

A procedure presented in this paper greerates test squences to check the conformity of an implementation wihh a protocol specification which is moedled as a determinstic fimite state machine(FSM).We proposed a tech-nique to determine a minium-cost tour of the transition graph of the FSM..The technique using Multiple UIO and Shortest Path(MUSP) sabes the cost 1-9% over MUIO and directly, derive a symertric test graph from an FSM graph From this fact, we proposed a tecuque using Multiple Sate Suganture(MUSS) to solve an open issue that the multiple UIO assignment may not minimize the lengy of the tour.In this paper, the proposed techique is also, applied to generate a synchronizable test wequence.And the result shows that the techique using MUSP anhd MUSS saves the cost 7-29% and 7-42% over the previous approach using MUIO, respect-ively.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.1
• /
• pp.135-145
• /
• 2000

Manufacturing Message Specification (MMS) is designed as a communication standard protocol, ISO/IEC 9506, on factory automation for messaging between heterogeneous programmable unit controller, PLC, NC, Robot, of different vendors on the networks. MMS is also a standard protocol of OSI reference model application layer, In this paper, we show an implementation of MMS over TCP/IP using ANSI-C programming language on the unix environment, and make java classification using java native interface (NJI) with MMS library. The use of java classification provides a basic environment ot overcome a difficult programming with different MMS application programming interface (MMS-I) which requires a siklled programming technique of graphic user interface (GUI). In this paper, we implement a MMS application program of the automated assembly model for printed circuit board based on WWW which shows the operation, control and monitoring of real manufacturing device (RMD) with web browser providing users for consistent user interface.