1 |
H. G. Lee, S. M. Nam, J. S. Ko, J. S. Choi, J. C. Lee and D. H. Chung, "The speed control and estimation of IPMSM using adaptive FNN and ANN," ICCAS 2005, p. 134, 2005.
|
2 |
J. S. Ko, J. S. Choi, K. T. Park, B. S. Park and D. H. Chung, "Development of HBPI Controller for High Performance Control of IPMSM Drive", pp. 368-372, ICPE'07, 2007.
|
3 |
J. S. Choi, J. S. Ko, J. H. Lee and D. H. Chung, "Speed control of IPMSM drive using neural network PI controller," CEE'06, pp. 102, 2006.
|
4 |
J. S. Choi, J. S. Ko, J. H. Lee and D. H. Chung, "Maximum torque control of IPMSM drive with ALC-FNN controller," ICEE'06, pp. 101, 2006.
|
5 |
J. S. Ko, J. S. Choi, J. H. Lee and D. H. Chung, "Maximum torque control of IPMSM drive with hybrid artificial intelligent controller," Proceeding of ICMATE'06, Session B1, pp. 177-182, 2006.
|
6 |
Sergaki, S. Eleftheria, Georgilakis, S. Pavlos, Kladas, G. Antonios, Stavrakakis and S. George, "Fuzzy logic based online electromagnetic loss minimization of permanent magnet synchronous motor drives," 18th International Conference on ICEM 2008, pp. 1-7, 2008.
|
7 |
C. Mademlis, J. Xypteras and N. Margaris, "Loss minimization in surface permanent magnet synchronous motor drives," IEEE Trans. on IE, vol. 47, no. 1, pp. 115-122, 2000.
|
8 |
Y. Nakamura, T. Kudo, F. Ishibashi and S. Hibino, "High-efficiency drive due to power factor control of a permanent magnet synchronous motor," IEEE Trans., PE, vol. 10, pp. 247-253, 1995.
|
9 |
R. S. Colby and D. W. Novotny, "Efficiency-optimizing permanent-magnet synchronous motor drive," IEEE Trans., IA, vol. 24, pp. 462-469, 1988.
|
10 |
S. Morimoto, Y. Tong, Y. Takeda and T. Hirasa, "Loss minimization control of permanent magnet synchronous motor drives," IEEE Trans. on IA, vol. 41, no. 5, pp. 511-517, 1994.
DOI
|
11 |
C. Mademlis and N. Margaris, "Loss minimization in vector-controlled interior permanent magnet synchronous motor drives," IEEE Trans. on IE, vol. 49, no. 6, pp. 1344-1347, 2002.
|
12 |
C. Cavallaro, A. O. D. Tommaso, R. Miceli, A. Raciti, G. R. Galluzzo and M. Trapanese, "Efficiency enhancement of permanent-magnet synchronous motor drives by online loss minimization approaches," IEEE Trans. on IE, vol. 52, no. 4, pp. 1153-1160, 2005.
|
13 |
C. Cavallaro, A. O. D. Tommaso, R. Miceli, A. Raciti, G. R. Galluzzo and M. Trapanese, "Analysis a DSP implementation and experimental validation of a loss minimization algorithm applied to permanent magnet synchronous motor drives," IECON '03. The 29th Annual Conference of the IEEE, vol. 1, pp. 312-317, 2003.
|
14 |
M. Lei, M. Sanada, S. Morimoto and Y. Takeda, "Advantages of IPMSM with adjustable PM armature flux linkage in efficiency improvement and operating range extension," Proceedings of the PCC Osaka 2002, vol. 1, pp. 136-141, 2002.
|
15 |
B. Stumberger, G. Stumberger, M. Hadziselimovic, T. Marcic, P. Virtic, M. Trlep and V. Gorican, "Design and finite-element analysis of interior permanent magnet synchronous motor with flux barriers," IEEE Transactions on Magnetics, vol. 44, no. 11, pp. 4389-4392, 2008.
DOI
|
16 |
Q. Liu, M. A. Jabbar and A. M. Khambadkone, "Design optimization of interior permanent magnet synchronous motors for wide- speed operation," IEEE International Conference on Power Electronics and Drive Systems, vol. 2, pp. 475-478, 2001.
|
17 |
L. Xu, L. Ye, L. Zhen and A. El-Antably, "A new design concept of permanent magnet for flux weakening operation," IEEE Trans. IA, vol. 31, pp. 373-378, 1995.
|
18 |
G. R. Slemon, "On the design of high performance surface-mounted PM motors," IEEE Trans. IA, vol. 30, pp. 134-140, 1994.
|