• Journal of Electrochemical Science and Technology
• /
• 제1권1호
• /
• pp.45-49
• /
• 2010

$Li_2PtO_3$ thin film electrodes, which might be possible candidate for the cathode materials for implantable batteries, were synthesized using an electrostatic spray deposition (ESD) technique onto a platinum foil substrate. Single phase $Li_2PtO_3$with a structure similar to layered $LiCoO_2$ structure were synthesized by spraying a precursor solution of $CH_3CO_2Li2H_2O$ in ethanol onto a Pt substrate at temperatures ranging from 200 to $400^{\circ}C$ followed by annealing at above $600^{\circ}C$. Lithium carbonate was the only major phase at temperatures up to $500^{\circ}C$. The X-ray diffraction (XRD) peaks of the Pt foil substrate and lithium carbonate disappeared at temperatures >$600^{\circ}C$. The volumetric capacity of the $Li_2PtO_3$ thin film synthesized using the ESD technique was approximately 817 mAh/$cm^3$, which exceeded that of $LiCoO_2$ (711 mAh/$cm^3$).

• 전기학회논문지
• /
• 제56권11호
• /
• pp.1998-2003
• /
• 2007

A flexible but implantable polyimide-based neural implant was fabricated for reliable and stable long-term monitoring of neural activities from brain. The developed neural implant provides 3-dimensional (3D) $3{\times}3$ structure, avoids any hand handling, and makes the insertion more efficient and reliable. Any film curvature caused by residual stress was not observed in the electrode. The 3D flexible polyimide electrode penetrated a dense gel whose stiffness is close to live brain tissue, because a ${\sim}1{\mu}m$ thick nickel was electroplated along the edge of the shank in order to improve the stiffness. The recording sites were positioned at both side of the shank to increase the probability of recording neural signals from a target volume of tissue. Impedance remained stable over 72 hours because of extremely low moisture uptake in the polyimide dielectric layers. At electrical recording test in vitro, the fabricated electrode showed excellent recording performance, suggesting that this electrode has the potential for great recording from neuron firing and long-term implant performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.473-474
• /
• 2007

본 연구는 체내 이식형 Pacemaker를 연구하면서 심장 질환을 Therapy 해 주는 방법에 대해 저전력 및 성능향상에 중점을 두고 연구 및 실험을 하였다. 우선적으로 심장의 심박동을 연산량이 적은 Peak_detection에서 체크하여 전력소모를 줄이고 나오는 각 심실 및 심방의 Interval을 Disease_episode 에서 받는다. 여기서 5가지 심실 및 심방에 관한 질환들 (VF : Ventricular Fibrillation, VT : Ventricular Tachycardia, FVT : Fast Ventricular Tachycardia, FAT_AF : Fast Atrial Tachycardia/Atrial Fibrillation, AT_AF : Atrial Tachycardia AT_AF : Atrial Fibrillation)을 판별한 후 각 병증에 맞는 Therapy 값을 출력하게 하였다. 그 외에 남아있는 병증에 대해서도 Therapy가 저전력 및 성능향상 되도록 설계하였다. 기존에 적용되어 있는 Detection 기법에서는 각각의 병증에 대해서 각 Detection이 있어 VF와 VT 사이에 있는 FVT와 같은 병증을 치료할 때 FVT 같은 경우에는 VF와 VT사이에 있는 질병이기 때문에 FVT_VF 및 FVT_VT와 같이 각각의 Detection을 두어 전력 소모가 있었다. 심장에서는 여러 질병이 한번에 나을 수 없다는 것에 착안하여 (심박동 Interval에 의해 질병이 판단되므로) 다른 병증이지만 같은 진단 기준을 쓰는 Detection을 통합함으로써 하나의 모듈로 구성하여 Gate수를 줄이고 저전력을 구현하였다. 또한 병증을 판별하는 진단 기준 모듈 중 Onset_Criterion 재설계하여 좀더 성능 향상에 중점을 두었다.

• Elastomers and Composites
• /
• 제50권4호
• /
• pp.292-296
• /
• 2015

Biomimetic artificial basilar membrane being a core part of artificial cochlear requires performance evaluation through aging test. To evaluate the aging properties of PVDF piezoelectric membrane used for artificial basilar membrane, its mechanical properties such as tensile strength and elastic modulus and piezoelectric property such as piezoelectric constant were measured. The aging test conditions and acceleration constants were calculated based on Arrhenius model. The changes in tensile strengths and elastic moduli measured were less than 10~20% after aging test equivalent for 10 years. The piezoelectric constants were decreased drastically to 80% of its initial value in the early stage of the aging test and expected to decrease slowly down to 65% over 10 years. The experimental results show the reliability of totally implantable novel artificial cochlear and will contribute its commercialization.

• 제어로봇시스템학회논문지
• /
• 제21권7호
• /
• pp.609-614
• /
• 2015

Implanted telemetry systems provide the ability to monitor different species of animals while they move within their cages. Species monitored include mice, rats, rabbits, dogs, pigs, primates, sheep, horses, cattle, and others. A miniature transmitter implanted in each animal measures one or more parameters. Parameters measured include arterial pressure, intra-pleural pressure, left ventricular pressure, intra-ocular pressure, bladder pressure, ECG, EMG, EEG, EOG, temperature, activity, and other parameters and transmits the data via radio frequency signals to a nearby receiver. Every conventional dedicated transmitter contains one or more sensors, cpu and battery. Due to the expected life of the battery, the measuring time is limited. To overcome these problems, electromagnetic inductive coupling based wireless power transmission technology using multiple transmit coils were proposed, with each coil having a different active area driven by the coil driver. In this research, a parallel resonance based coil driver and serial resonance based coil driver are proposed. From the experiments we see that the parallel coil driver shows better performance under a low impedance and multiple coils configuration. However, the serial coil driver is more efficient for high impedance transmit coils.

• Journal of Pharmaceutical Investigation
• /
• 제27권3호
• /
• pp.225-231
• /
• 1997

For the effective administration of naloxone, we attempted to investigate the naloxone sustained-release implants. Using the biodegradable polymer, poly[(diethyl glutamate)-co-(ethyl glycinate)phosphazenes](PGGP), the implantable devices containing naloxone hydrochloride(NLX HCl) and naloxone base(NLX) were prepared. The release rates of NLX and NLX HCl were compared. Influences of NLX contents on release rates were examined. For pharmacokinetic studies, NLX and NLX HCl loaded devices were implanted subcutaneously in rabbits and then the plasma concentrations of NLX were determined by HPLC(ECD). NLX-containing devices were implanted with various doses and pharmacokinetic parameters according to dose were calculated. The relative bioavailabilities were evaluated and compared. Incorporation of NLX in the polymer leaded to a slow release. There were no differences of release rates based on drug contents. In pharmacokinetic parameters determined in 216 hours, NLX loaded devices resulted in enhanced bioavailability with the higher AUC (p<0.01) than NLX HCl loaded devices and MRT was significantly (p<0.05) increased. This result demonstrates that NLX is more suitable for sustained release devices than NLX HCl. Therefore it is anticipated that the effective concentrations of naloxone could be maintained for longer periods and bioavailabilities could be improved by naloxone sustained-release implants, with varying drug base/hydrochloride.

• 대한의용생체공학회:의공학회지
• /
• 제17권4호
• /
• pp.479-490
• /
• 1996

To utilize collagen as an implantable biomateriall the mcct widely used bovine skin origin Type I collagen was investigated Pepsin treated, Type I atelocollagen was extracted and crosslinked by the ultraviolet(W) ray with wavelength of 254nm or by various concentrations of glutaraldehyde to produce collagen membranes. The crosslink rates of the specimens were observed by a polarized light microscope, a scanning electron microscope, and a Fourier transform infrared (FT-lR) spectrometer. The followings are concluded 1. The collagen membranes produced by both 2.5% glutaraldehyde solution and 254nm UV ray irra- diation demonstrated similar morphologies on polarized light microscopic and scanning electron microscopic views. 2. The chemical structures of the crosslinked membranes by glutaraldehyde over 2.5% in concentrations revealed similar intensities to that of the UV ray irradiated one in FT-lR investigation. 3. To obtain optimal croulink in bovine stalin origin Type I atelocollagen, 2.5% glutaraldehyde solution or UV ray irradiation with 254nm wavelength is acceptable.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.184-187
• /
• 1996

We have been studying an implantable electrolarynx controlled by the EMG of the sternohyoid muscle(SH). Generally, the pitch control methods of the electrolarynx by SH EMG have two types. In the first pitch control method, the pitch of the electrolarynx increases according to the decrease in amplitude of the SH EMG, and vice versa. In the second pitch control method, the pitch of the electrolarynx decreases according to the decrease in amplitude of the SH EMG, and vice versa. We carried out four physiological experiments about two pitch control method. Also, we made two electrolarynges with two type pitch control, and tested those electrolarynges. From the result of the experiments, we found that the developed electrolarynx have a good property by the first pitch control method more than the second pitch control method.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.278.1-278.1
• /
• 2013

Among the prerequisites for stable neural interfacing are the long-term stability of electrical performance of and the excellent biocompatibility of conducting materials in implantable neural electrodes. Reduced graphene oxide offers a great potential for a variety of biomedical applications including biosensors and, particularly, neural interfaces due to its superb material properties such as high electrical conductivity, decent optical transparency, facile processibility, and etc. Nonetheless, there have been few systematic studies on the graphene-based neural interfaces in terms of biocompatibility of electrode materials and long term stability in electrical characteristics. In this research, we prepared the primary culture of rat hippocampal neurons directly on reduced graphene oxide films which is chosen as a model electrode material for the neural electrode. We observed that the viability of primary neuronal culture on the present structure is minimally affected by nanoscale graphene flakes below. These results implicate that the multilayer films of reduced graphene oxides can be utilized for the next-generation neural interfaces with decent biocompatibility and outstanding electrical performance.

• 세라미스트
• /
• 제21권4호
• /
• pp.312-330
• /
• 2018

Energy storage/conversion has become crucial not only to meet the present energy demand but also more importantly to sustain the modern society. Particularly, electrical energy storage is critical not only to support electronic, vehicular and load-levelling applications but also to efficiently commercialize renewable energy resources such as solar and wind. While Li-ion batteries are being intensely researched for electric vehicle applications, there is a pressing need to seek for new battery chemistries aimed at stationary storage systems. In this aspect, Zn-ion batteries offer a viable option to be utilized for high energy and power density applications since every intercalated Zn-ion yields a concurrent charge transfer of two electrons and thereby high theoretical capacities can be realized. Furthermore, the simplicity of fabrication under open-air conditions combined with the abundant and less toxic zinc element makes aqueous Zn-ion batteries one of the most economical, safe and green energy storage technologies with prospective use for stationary grid storage applications. Also, Zn-ion batteries are very safe for next-generation technologies based on flexible, roll-up, wearable implantable devices the portable electronics market. Following this advantages, a wide range of approaches and materials, namely, cathodes, anodes and electrolytes have been investigated for Zn-ion batteries applications to date. Herein, we review the progresses and major advancements related to aqueous. Zn-ion batteries, facilitating energy storage/conversion via $Zn^{2+}$ (de)intercalation mechanism.