• 대한치과보철학회지
• /
• 제55권2호
• /
• pp.218-224
• /
• 2017

방사선치료를 받은 상악에 임플란트 지지 고정성 보철물을 이용하여 수복하는 것은 골치유능력이 낮기 때문에 상세한 치료계획이 필요하다. All-on-4 개념에 의한 임플란트 식립은 골이식을 피하면서 임플란트를 매식할 수 있어 유리하다. 일반적으로 경사된 임플란트에는 기성 경사형 지대주를 사용해왔다. 본 임상증례에서는 computer-aided design and computer-aided manufacturing (CAD/CAM)으로 제작된 지대주를 사용하였다. 본 증례는 all-on-4 개념에 의해 임플란트를 매식하고 CAD/CAM titanium 지대주를 제작한 다음 CAD/CAM zirconia 고정성 보철물로 수복하여 좋은 결과를 얻었기에 보고하고자 한다.

• 대한치과보철학회:학술대회논문집
• /
• 대한치과보철학회 2000년도 춘계학술대회
• /
• pp.67-67
• /
• 2000

• 대한치과보철학회:학술대회논문집
• /
• 대한치과보철학회 2003년도 춘계학술대회 및 제1회 한일 공동 학술대회
• /
• pp.96-96
• /
• 2003

• 구강회복응용과학지
• /
• 제24권2호
• /
• pp.183-192
• /
• 2008

미디어, 인터넷, 상업용 광고 등 사회의 각 분야에서 미용에 대한 관심이 고조되는 상황에서 오늘날, 치과 보철수복은 단지 저작 기능을 회복시키는 것뿐만이 아니라 특히 심미적 관점에서 웰빙이나 삶의 질 향상에도 크게 기여하고 있다. 35세의 남성 환자로써 1) #11, 23의 금속-도재수복물의 도재 파절 2) 안모 수평기준선에 비해 기울어진 상악전치 절단연 3) 안모 수직기준선인 안모 정중선에 비해 편위된 치열정중선 4) 상악 전치의 대칭성 상실을 주소로 내원하였다. 환자는 임플란트 수복을 포함하여 전통적인 고정성 보철 치료로 안모 개선을 요구하였다. 일반적으로 상악 전치부에서 전통 보철이나 임플란트 보철 시술 목적 중의 하나가 치아구도, 치아-안모구도, 그리고 안모구도에서 치열이 매력적으로 그리고 아름답게 느껴지도록 심미 보철물을 제작해 주는 것이다. 본 증례에는 연조직과 경조직의 증대술과 성형술을 바탕으로 교정과, 구강악안면외과, 그리고 보철과가 협진을 통해 자연치와 임플란트를 이용한 금속-도재 수복물로써 기하학적 측면에서 치열의 심미성을 향상시킨 결과를 얻었기에 이를 보고하는 바이다.

• The Journal of Advanced Prosthodontics
• /
• 제12권4호
• /
• pp.233-238
• /
• 2020

PURPOSE. This study aims to compare the marginal fitness of two types of implant-supported fixed dental prosthesis, i.e., cementless fixation (CL.F) system and cement-retained type. MATERIALS AND METHODS. In each group, ten specimens were assessed. Each specimen comprised implant lab analog, titanium abutment fabricated with a 2-degree tapered axial wall, and zirconia crown. The crown of the CL.F system was retained by frictional force between abutment and relined composite resin. In the cement-retained type, zinc oxide eugenol cement was used to set crown and abutment. All specimens were sterilized with ethylene oxide, immersed in Prevotella intermedia culture in a 50 mL tube, and incubated with rotation. After 48 h, the specimens were washed thoroughly before separating the crown and abutment. The bacteria that penetrated into the crown-abutment interface were collected by washing with 500 µL of sterile saline. The bacterial cell number was quantified using the agar plate count technique. The BacTiter-Glo Microbial Cell Viability Assay Kit was used to measure bacterial adenosine triphosphate (ATP)-bioluminescence, which reflects the bacterial viability. The t-test was performed, and the significance level was set at 5%. RESULTS. The number of penetrating bacterial cells assessed by colony-forming units was approximately 33% lower in the CL.F system than in the cement-retained type (P<.05). ATP-bioluminescence was approximately 41% lower in the CL.F system than in the cement-retained type (P<.05). CONCLUSION. The CL.F system is more resistant to bacterial penetration into the abutment-crown interface than the cement-retained type, thereby indicating a precise marginal fit.

• 구강회복응용과학지
• /
• 제29권4호
• /
• pp.426-433
• /
• 2013

완전 무치악 환자를 총의치로 수복할 때 특히 하악의 경우 유지, 지지 면적이 상악보다 좁아 의치의 탈락, 불량한 지지 및 안정성, 통증을 유발하여 의치의 사용이 불편할 수 있다. 이런 환자에서 임플란트를 이용한 보철수복은 심미성, 안정성, 저작력을 향상시킬 수 있다. 반면 상악 완전무치악은 구개를 이용할 수 있으므로 총의치로 수복하였을 때 많은 환자들이 잘 적응하여 사용하고 있다. 이에 상하악 완전 무치악 환자의 치료 옵션으로 하악은 임플란트로 지지를 받는 고정성 보철물 또는 임플란트 오버덴쳐로 수복하고 상악은 연조직에 의해 지지를 받는 전통적인 총의치로 수복하는 전악 보철수복이 제시되었다. 이 때 상악 총의치에 대합하는 하악 임플란트 고정성 보철이 상악 잔존치조제의 골흡수에 어떠한 영향을 미치는지에 대한 문헌고찰과 함께 증례를 보고하고자 한다.

• Journal of Periodontal and Implant Science
• /
• 제35권1호
• /
• pp.53-63
• /
• 2005

Number of fixtures supporting prosthesis for rehabilitation of partial edentulism in distal area is an important factor in distal area to the bone tissue response around dental implant. Optimal number and optimal positioning of dental implant has leaded to the stable condition of bone tissue and successful long-term treatment outcome. This clinical and radiographic study was performed to document and evaluate the short-term result of occlusal rehabilitation by means of implant-supported fixed prostheses (ISPs) especially for partial edentulism in distal area in patients treated for advanced periodontal disease and to verify the number of fixture affecting the bone tissue response. A total of 30 consecutive patients referred because of advanced periodontal disease were included. Before the implant therapy was initiated, periodontal treatment was performed and the outcome evaluated during at least a 6-month period. An individual maintenance care program was designed for each patient. All 75 implants were placed using a 2-stage surgical approach. The patients were divided into 2 groups, in one of which two fixtures were placed and in the other of which three fixtures were placed with tripodal geometry. Following installation of the ISPs, all patients underwent a baseline examination including evaluation of i) oral hygiene, and ii) periodontal/ peri-implant conditions, and iii) radiographs. These examinations were repeated annually during the 1 or 2-year observation period. The results were as follows: 1.No single implant was lost during the observation follow-up period. 1.The percentage of plaque harboring surfaces and bleeding units upon probing were found to be low (<10%), and no soft tissue complications were recorded. 1.Two-fixture group showed bone destruction ranged from 0.0mm to 1.5mm and the mean was 0.31mm. Three-fixture group showed more bone destruction of 0.51mm. There was no statistically difference between two groups. These results suggested that the factor for success is not the number of fixture but the strict maintenance of peri-implant tissue health and initial stability of fixture.

• The Journal of Advanced Prosthodontics
• /
• 제4권2호
• /
• pp.89-92
• /
• 2012

PURPOSE. Adequate passive-fitting of one-piece cast 3-element implant-supported frameworks is hard to achieve. This short communication aims to present an alternative method for section of one-piece cast frameworks and for casting implant-supported frameworks. MATERIALS AND METHODS. Three-unit implant-supported nickel-chromium (Ni-Cr) frameworks were tested for vertical misfit (n = 6). The frameworks were cast as one-piece (Group A) and later transversally sectioned through a diagonal axis (Group B) and compared to frameworks that were cast diagonally separated (Group C). All separated frameworks were laser welded. Only one side of the frameworks was screwed. RESULTS. The results on the tightened side were significantly lower in Group C ($6.43{\pm}3.24{\mu}m$) when compared to Groups A ($16.50{\pm}7.55{\mu}m$) and B ($16.27{\pm}1.71{\mu}m$) ($P$ <.05). On the opposite side, the diagonal section of the one-piece castings for laser welding showed significant improvement in the levels of misfit of the frameworks (Group A, $58.66{\pm}14.30{\mu}m$; Group B, $39.48{\pm}12.03{\mu}m$; Group C, $23.13{\pm}8.24{\mu}m$) ($P$ <.05). CONCLUSION. Casting diagonally sectioned frameworks lowers the misfit levels. Lower misfit levels for the frameworks can be achieved by diagonally sectioning one-piece frameworks.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제49권5호
• /
• pp.278-286
• /
• 2023

Objectives: This review assessed the performance of implant-supported fixed hybrid prostheses in 21 patients who received a total of 137 implants between 2003 and 2010. The implants were evaluated for marginal bone resorption, complications, success rate, and survival rate based on their vertical angularity, type of bone graft, and measured implant stability. Materials and Methods: One-way ANOVA and chi-square tests were used to analyze the relationships among long-term evaluation factors and these variables. The mean initial bone resorption in the implant group with a vertical angle of more than 20° was 0.33 mm and mean final bone resorption was 0.76 mm. In contrast, the mean initial bone resorption in the implant group with a vertical angle of less than 10° was 1.19 mm and mean final bone resorption was 2.17 mm. Results: The results showed that mean bone resorption decreased with an increase in the vertical placement angle of the implants used in fixed hybrid prostheses, as well as in the group without additional bone grafts and those with high implant stability. The success rate of implants placed after bone grafting was found to be higher than those placed simultaneously. Conclusion: These results suggest that implant-supported fixed hybrid prostheses may be an effective treatment option for edentulous patients, and intentionally placing implants with high angularity may improve outcomes.

• 대한치과보철학회지
• /
• 제61권3호
• /
• pp.245-256
• /
• 2023

임플란트 고정성 보철물 제작 시 디지털 시스템을 이용하여 수복할 때, 3차원적인 임플란트 위치의 구내 스캔과 임시 의치 혹은 임시 보철물 장착 후 구내 스캔을 이용한 이중 디지털 스캐닝(double digital scanning) 기법이 필요하다. 구내 스캔 시, 스캔 바디를 안정적인 랜드마크로 이용하면 다지털 인상의 정확도 향상과 기공과정이 효율적이고 단순화될 수 있다. 본 증례는 완전 디지털 시스템을 활용하여 맞춤형 치과용 임플란트 지대주 및 임시 보철물, 최종 보철물을 계획하고 제작하였다. 임플란트 식립 후, 임플란트에 체결한 구내 스캔 바디와 임시 의치 조직면에 인기 된 구내 스캔 바디의 스캔 영역을 중첩하였다. 중첩된 파일에서 임시 의치의 수직 고경에 맞는 맞춤형 치과용 임플란트 지대주와 임시 보철물을 제작하여 환자에게 시적 하였고, 임시 보철물을 토대로 최종 보철물을 제작하였다. 임시 의치 제작 시 설정한 수직 고경, 중심위 등을 최종 보철물까지 활용하여 기능 및 심미적으로 만족할 만한 결과를 얻어 이를 보고하고자 한다.