• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.324-326
• /
• 2004

l2wt%Cr Steel has been applied on turbine bucket and nozzle partition material of power plant. Turbine bucket and nozzle get damaged by solid particle within steam, therefore they are protected by surface treatments such as ion nitriding, boriding and chrome carbide HVOF spray coating. In this study, solid particle erosion(SPE) characteristics after these surface treatments are examined at operating temperature 540$^{\circ}C$ and 590$^{\circ}C$ of fossil power plant and the mechanism of damage was studied. Erosion of 12wt%Cr steel is originated by micro cutting and that of boriding and chrome carbide HVOF spray is originated by these mechanism - repeating collision, crack initiation and propagation. As the results of SPE test at 540$^{\circ}C$ and 30$^{\circ}$ impact angle that is the most commonly occurred in power plant, Boriding had the best SPE -resistance property, Cr$_2$C$_3$-25(Ni20Cr) HVOF spayed and ion nitrided samples were also better than bare metals(l2wt%Cr Steels). At 590$^{\circ}C$ and 30$^{\circ}$ impact angle, Boriding had also the most superior characteristic and HVOF spay sample was better than bare metal.

• Composites Research
• /
• v.16 no.5
• /
• pp.21-27
• /
• 2003

Using the theory of linear piezoelectricity, the dynamic response of a central crack in a functionally graded piezoelectric ceramic under anti-plane shear impact is analyzed. We assume that the properties of the functionally graded piezoelectric material vary continuously along the thickness. By using the Laplace and Fourier transform, the problem is reduced to two pairs of dual integral equations and then into Fredholm integral equations of the second kind. Numerical values on the dynamic stress intensity factors are presented to show the dependence of the gradient of material properties and electric loading.

• Journal of Applied Biological Chemistry
• /
• v.50 no.4
• /
• pp.234-238
• /
• 2007

The effects of ultra-fine pulverization on the physicochemical properties of rice starch (RS) were investigated using a high impact planetary mill. After pulverization, RVA characteristics, peak viscosity, break down, and set back values of RS decreased from 274.75 to 9.42 RVU, 214.46 to 6.17 RVU, and 87.80 to 17.00 RVU, respectively. The pasting properties also changed significantly. X-Ray diffractogram revealed RS had four A-type peaks, which disappeared after pulverization. The peak temperature and gelatinization enthalpy of RS using differential scanning calorimetry (DSC) were 13.99 J/g at $75.14^{\circ}C$, whereas the pulverized RS (PRS) had two peaks, 0.13 J/g at $63.88^{\circ}C$ and 1.23 J/g at $101.24^{\circ}C$. DSC measurement showed the retrogradation degree of PRS was lower than that of RS after storage at 4 and $25^{\circ}C$. The enzymatic (${\alpha}$-amylase) digestibilities of RS and PRS were 72.7 and 77.3%, respectively.

• Textile Coloration and Finishing
• /
• v.29 no.3
• /
• pp.131-138
• /
• 2017

Most of high performance fabrics for the car racing protective clothing have been developed to have thermal resistance, flame retardant property, impact resistance and anti-frictional properties to protect the racer from the crucial accident. In this study, the meta-aramid fabric, which has inherent flame retardant, was coated with nanoparticles of SiC to enhance the impact resistance and anti-friction properties. Uniform coating of the nanoparticles onto the fabrics was obtained by using tape casting method. As the experimental parameters, size and content of the SiC nanoparticle were varied with the coating conditions of the fabric surface. The effects of the nanoparticle coating on the properties of meta-aramid fabric were examined with various instrumental analyses such as SEM, tensile strength and abrasion test.

• The Korean Journal of Health Service Management
• /
• v.5 no.1
• /
• pp.111-123
• /
• 2011

The research tris to provide some basic data for the efficient method of human resources management and the efficiency of hospital organization by drawing how servant leadership of physical therapists has impact on job satisfaction and organizational commitment. As a measuring device the method of self-fill-in questionnaire survey was utilized and the correlation and regression analysis was practiced on demographic property, the relationships of 11 kinds of variables between servant leadership and organizational commitment. Job satisfaction was concerned with internal motivation, autonomy, hearing, altruistic vocation, community sense, sympathy formation, vision in the positive order, while organizational commitment was concerned with internal motivation, altruistic vocation, vision, autonomy, community sense, hearing, and sympathy formation is the positive order. Supervisors of physical therapists should try to strive to fulfill the demands of therapists in their position, suggest the vision and objectives to them, and enhance their community sense. As a result, supervisors of physical therapists can enhance job satisfaction and organizational commitment in the position of their employees.

• Korean Journal of Materials Research
• /
• v.30 no.2
• /
• pp.87-92
• /
• 2020

This study deals with the effects of austempering time on the microstructure and mechanical properties of ultra-high strength nanostructured bainitic steels with high carbon and silicon contents. The steels are composed of bainite, martensite and retained austenite by austempering and quenching. As the duration of austempering increases, the thickness of bainitic ferrite increases, but the thickness of retained austenite decreases. Some retained austenites with lower stability are more easily transformed to martensite during tensile testing, which has a detrimental effect on the elongation due to the brittleness of transformed martensite. With increasing austempering time, the hardness decreased and then remained stable because the transformation to nanostructured bainite compensates for the decrease in the volume fraction of martensite. Charpy impact test results indicated that increasing austempering time improved the impact toughness because the formation of brittle martensite was prevented by the decreased fraction and increased stability of retained austenite.

• The Korean Journal of Applied Statistics
• /
• v.6 no.2
• /
• pp.421-433
• /
• 1993

Few ovservation can influence in model building procedure and can dominate the least squares fit of a selected model. An observation, however, may not have the same impact on all aspects of regression analysis. We introduce a statistic which measures the impact of individual cases on the overall goodness-of-fit statistics. We also propose an influence measure for variable selection problem. The property of uncorrelatedness between fitted values and residuals has been used to develop the influence measure. The performance of the measures are used to develop the influence measure. The performance of the measures are compared with other widely used influence measures by the analysis of real data.

• Advances in concrete construction
• /
• v.5 no.6
• /
• pp.575-586
• /
• 2017

The disposal of polythene waste and fly ash is causing serious threat to the environment. Aim of this study is to decrease environmental pollution by using polythene waste and fly ash in concrete. In this study, cement was partially replaced with 0%, 5%, 10%, 15% and 20% fly ash (by weight) and plastic waste was added in shredded form at 0.6% by weight of concrete. The specimens were prepared for the concrete mix of M25 grade and water to cementitious material ratio (w/c) was maintained as 0.45. Fresh concrete property like workability was examined during casting the specimens. Hardened properties were found out by carrying out the experimental work on cubes, cylinders and beams which were cast in laboratory and their behavior under test were observed at 7 & 28 days for compressive strength and at 28 days for density, flexural strength, dynamic modulus of elasticity, abrasion resistance, water permeability and impact resistance. Overall results of this study show that addition of 0.6% (by weight of the concrete) plastic waste with 10% (by weight of cement) replacement of cement by fly ash result an improvement in properties of the concrete than conventional mix.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.5
• /
• pp.37-41
• /
• 2021

This study aims to investigate the relationship between the exchange rate and Trade Balance. Trade Balance is used as the dependent variable, and the independent variables are Exchange Rate, Gross Domestic Product, and Inflation. Augmented Dickey-Fuller unit root test was adopted to test the stationary property of time series data, Auto Regressive Distributed Lag model was employed to find the long run and short-run relationship and long-run adjustment, Bound test approach, the unrestricted Error Correction Model and Granger Causality Test are used to analyze the data from 1977 to 2019. The research findings suggest that inflation has a positive impact on the trade balance in the short run. The exchange rate and the Gross Domestic Product have adverse effects on Trade balance in the long run. The coefficient of ER in the previous year is negative, and the coefficient of TB in the previous year is positive and significant. This is consistent with the J-Curve phenomenon, which states that devaluation may not improve trade balance in the immediate period, but will significantly impact the trade balance improvement in subsequent periods. Hence Marshall Lerner Condition exists in Sri Lanka.

• Journal of Environmental Science International
• /
• v.30 no.7
• /
• pp.557-571
• /
• 2021

This study aimed to classify typhoons using a more objective index based on strong winds and precipitation data from 1904 to 2019 obtained from the Automated Surface Observing System. The Typhoon Type Index (TTI) was calculated by classifying wind speed and precipitation of each typhoon, thereby revealing the rate and characteristics of the wind-type and rain-type typhoons. In addition, the top 10 typhoons for property damage were analyzed by dividing them into three types according to the typhoon course. The analysis showed that typhoons of type 1, heading north to the west coast, were most clearly affected by the wind. In addition, the impact of the wind was reduced and the impact of rain increased in the order of typhoon type 2 that landed on the southern coast and type 6 that affected the Korean Peninsula through China.