• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.385-390
• /
• 2006

This paper examines the sampling and jitter specifications and considerations for Global Navigation Satellite Systems (GNSS) software receivers. Software radio (SWR) technologies are being used in the implementation of communication receivers in general and GNSS receivers in particular. With the advent of new GPS signals, and a range of new Galileo and GLONASS signals soon becoming available, GNSS is an application where SWR and software-defined radio (SDR) are likely to have an impact. The sampling process is critical for SWR receivers, where it occurs as close to the antenna as possible. One way to achieve this is by BandPass Sampling (BPS), which is an undersampling technique that exploits aliasing to perform downconversion. BPS enables removal of the IF stage in the radio receiver. The sampling frequency is a very important factor since it influences both receiver performance and implementation efficiency. However, the design of BPS can result in degradation of Signal-to-Noise Ratio (SNR) due to the out-of-band noise being aliased. Important to the specification of both the ADC and its clocking Phase- Locked Loop (PLL) is jitter. Contributing to the system jitter are the aperture jitter of the sample-and-hold switch at the input of ADC and the sampling-clock jitter. Aperture jitter effects have usually been modeled as additive noise, based on a sinusoidal input signal, and limits the achievable Signal-to-Noise Ratio (SNR). Jitter in the sampled signal has several sources: phase noise in the Voltage-Controlled Oscillator (VCO) within the sampling PLL, jitter introduced by variations in the period of the frequency divider used in the sampling PLL and cross-talk from the lock line running parallel to signal lines. Jitter in the sampling process directly acts to degrade the noise floor and selectivity of receiver. Choosing an appropriate VCO for a SWR system is not as simple as finding one with right oscillator frequency. Similarly, it is important to specify the right jitter performance for the ADC. In this paper, the allowable sampling frequencies are calculated and analyzed for the multiple frequency BPS software radio GNSS receivers. The SNR degradation due to jitter in a BPSK system is calculated and required jitter standard deviation allowable for each GNSS band of interest is evaluated. Furthermore, in this paper we have investigated the sources of jitter and a basic jitter budget is calculated that could assist in the design of multiple frequency SWR GNSS receivers. We examine different ADCs and PLLs available in the market and compare known performance with the calculated budget. The results obtained are therefore directly applicable to SWR GNSS receiver design.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.11 no.3
• /
• pp.100-110
• /
• 2009

'Hongro' is one of the important mid-season apple cultivars bred in Korea. The recent occurrence of water core in Hongro and the consequent problems motivated this study. The objectives of our study were to investigate the influence of air temperature during the growing period on water core occurrence in Hongro and to provide methods to mitigate its impact. Based on our field experiments for three years, the results indicated that the occurrence of water core disorder was due to the prolonged exposure to high temperature ($T_a$) of >$30^{\circ}C$ during the ripening period. The rates of occurrence of water core disorder were higher in the fruit whose weight was more than 300g or those located outside the tree canopy and thus exposed to stronger solar radiation. In terms of mitigating the water core occurrence, the application of spraying $CaCl_2$ four times from late July to August was effective. Furthermore, between 1 and 15 August when the rate of occurrence was high with $T_a$ (from 3:00 to 5:00 p.m.) >$30^{\circ}C$, the micro-water sprinkling for 30 minutes starting at 6:00 p.m. with a supplementary spray conducted two hours after the first application drastically reduced the water core occurrence.

• Journal of Intelligence and Information Systems
• /
• v.19 no.2
• /
• pp.55-71
• /
• 2013

The prediction model is the main factor affecting the performance of a knowledge-based system for bankruptcy prediction. Earlier studies on prediction modeling have focused on the building of a single best model using statistical and artificial intelligence techniques. However, since the mid-1980s, integration of multiple techniques (hybrid techniques) and, by extension, combinations of the outputs of several models (ensemble techniques) have, according to the experimental results, generally outperformed individual models. An ensemble is a technique that constructs a set of multiple models, combines their outputs, and produces one final prediction. The way in which the outputs of ensemble members are combined is one of the important issues affecting prediction accuracy. A variety of combination schemes have been proposed in order to improve prediction performance in ensembles. Each combination scheme has advantages and limitations, and can be influenced by domain and circumstance. Accordingly, decisions on the most appropriate combination scheme in a given domain and contingency are very difficult. This paper proposes a confidence-based selection approach as part of an ensemble bankruptcy-prediction scheme that can measure unified confidence, even if ensemble members produce different types of continuous-valued outputs. The present experimental results show that when varying the number of models to combine, according to the creation type of ensemble members, the proposed combination method offers the best performance in the ensemble having the largest number of models, even when compared with the methods most often employed in bankruptcy prediction.

• Archives of Plastic Surgery
• /
• v.34 no.2
• /
• pp.163-168
• /
• 2007

Purpose: The flap delay is a widely used technique to increase the flap survival. Dexamethasone is a well-known drug to have a positive impact on the flap survival. The objective of this study is to investigate the dual synergic effect of epinephrine as a chemical delay agent plus dexamethasone on the TRAM flap survival in rat model. Methods: Forty Sparague-Dawley rats were divided into 4 groups evenly and a right inferior epigastic vessel pedicled TRAM flap, sized $5.0{\times}3.0cm$, was elevated on each upper abdomen. In the control group(N=10), 2 ml saline was injected on transverse abdominis muscle for a week before the flap elevation. In surgical delay group(N=10) all superior pedicles and left inferior pedicle were ligated a week before the flap elevation. In epinephrine group (N=10), 1 : 50000 epinephrine mixed saline was injected to transverse abdominis muscle every day for a week before flap elevation. In epinephrine plus dexamethasone group (N=10), the same procedure as that of epinephrine group was conducted for a week and 2.5 ml/kg dexamethasone was injected transverse abdominis muscle 2 hours before the flap elevation. On the seventh day after flap elevation, the survival area of flaps were measured and the vessel numbers in upper dermis of flap were counted through histologic slides. Results: The results were as follows: the mean percentage of the flap survival area of surgical delay group ($60.5{\pm}2.44%$), epinephrine group ($75{\pm}4.43%$), and epinephrine plus dexamethasone group ($87{\pm}1.94%$) were higher than that of the control group ($35{\pm}6.06%$) significantly(p<0.05). In case of the vessel number though histologic slides, epinephrine group ($79.3{\pm}5.57$) and epinephrine plus dexamethasone group ($96.3{\pm}14.05$) were higher than that of the control group ($44.8{\pm}8.82$) significantly(p<0.05), but the surgical delay group ($54{\pm}4.23$) showed no significant difference (p>0.05) compared to that of the control group. Conclusion: The results indicated that epinephrine plus dexamethasone injection before the flap elevation could be used to increase the TRAM flap survival area in rat model.

• Journal of Korean Society of Transportation
• /
• v.35 no.3
• /
• pp.183-196
• /
• 2017

In this study, policy evaluation scheme was established to encourage the efficient implementation of EcoMobility which has been expanding gradually all around the world. A total of eight evaluation goals and 22 evaluation items are reviewed and suggested based on the three major evaluation categories of "Basic elements for EcoMobility", "Land use and transport system for EcoMobility", and "Implications and impact of EcoMobility". The results of this study are as follows: the result of AHP analysis which reflects only the hierarchical structure shows a high priority in "Elements for EcoMobility promotion", "Eco-fiendly transport infrastructure", and "Safety in transport". While in result of ANP which considered the elements' dependencies, "Eco-fiendly transport Services", "Welfare in transport", and "Environment by transport" have high weights and importances. In conclusion, this study would be useful to make reasonable judgment based on the analysis results of the two techniques in order to ensure reliability in evaluation of EcoMobility policy. Furthermore we have confirmed appropriate evaluation technique between AHP and ANP which is better to reflect the features of EcoMobility.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.359-368
• /
• 2016

In the 21st century, the Korean university education system is focused on innovation and change, including cooperation between industry and universities. It should be a goal to foster an industry-university ecosystem through interactions between universities and industry. Therefore, it is important to measure their relationships and to find advisable ways to measure the final results of industry-university cooperation. This paper sets out the achievements in cooperation and the satisfaction from such enterprises and measures mutual relationships influencing satisfaction from industry-university cooperation as to adherence and cooperation. Therefore, this research focuses on regression equation analysis in order to analyze the influence from satisfaction with industry-university cooperation based on factors in the relations between industry and universities. Also, as we examined the multicollinearity problem, before analyzing multiple regression, the multicollinearity problem appeared to be relatively irrelevant. In particular, the satisfaction variable, which can also be set as a subordinate variable, was in this research constructed as a high-dimensional subordinate variable composed of five individual variables. We then analyzed how the adherence construct factor and degree of cooperation construct factor influences the respective and subordinate satisfaction variables. As a result, the degree of realization of local customized programs was shown by the most significant variables. The biggest factor influencing satisfaction with industry-university cooperation proves the degree of realization for appropriate programs under local conditions, such as education, research, and technique guidance.

• Journal of KIISE:Software and Applications
• /
• v.32 no.7
• /
• pp.683-692
• /
• 2005

Java specification states that all accesses to an object must be checked at runtime if object refers to null. Since Java is an object-oriented language, object accesses are frequent enough to make null pointer checks affect the performance significantly. In order to reduce the performance degradation, there have been attempts to remove redundant null pointer checks. For example, in a Java environment where a just-in-time (JIT) compiler is used, the JIT compiler removes redundant null pointer check code via code analysis. This paper proposes a technique to remove additional null pointer check code that could not be removed by previous JIT compilation techniques, via early null pointer check using an architectural feature called predication. Generally, null point check code consists of two instructions: a compare and a branch. Our idea is moving the compare instruction that is usually located just before an use of an object, to the point right after the object is defined so that the total number of compare instructions is reduced. This results in reduction of dynamic and static compare instructions by 3.21$\%$ and 1.98$\%$. respectively, in SPECjvm98 bechmarks, compared to the code that has already been optimized by previous null pointer check elimination techniques. Its performance impact on an Itanium machine is an improvement of 0.32$\%$.

• Journal of agriculture & life science
• /
• v.45 no.3
• /
• pp.53-58
• /
• 2011

To develop an efficient micropropagation technique for Vitex negundo var. insica, which is known as aromatic and medicinal tree, the effects of various plant growth regulators (PGRs) on in vitro shoot proliferation and rooting were evaluated using the newly-developed shoots of a 3-year-old tree. Multiple shoot induction was achieved effectively on WPM (woody plant medium) supplemented with 0.5-2.0 mg/L BA, and the highest shoot number (7.9/explant) was obtained at the concentration of 1.0 mg/L BA. Typically 1 or 2 superior shoots (about 3.4 cm) were induced on hormone-free WPM. Combined treatment of BA 2.0 + GA 0.5 mg/L appeared to effective on shoot proliferation and rooting. Plant growth regulators added in shoot proliferation medium had strong impact on subsequent rooting as well. Overall, shoots induced by BA treatment resulted in high rooting rates while the effect was reduced gradually by ascending BA levels. TDZ of low concentration also revealed a similar tendency as BA, but the rooting ability was strongly inhibited at the concentration of 0.5 mg/L, and rooting was never observed at the concentrations higher than 0.5 mg/L. Combined treatment of BA and IBA had positive influence in both shoot proliferation and rooting. These results suggest that Vitex negundo var. insica could be effectively micropropagated via axillary bud cultures.

• Korean Security Journal
• /
• no.56
• /
• pp.9-30
• /
• 2018

Crime prevention strategies are introduced to reduce the loss caused by crimes, and Target hardening against domestic burglary attacks is broadly accepted as one of such physical security strategies. In terms of business and home security, target hardening is one of the suite of protective measures that are included in crime prevention through environmental design(CPTED). This can include ensuring all doors and windows are sourced and fitted in such a way that they can resist forcible and surreptitious from the attack of intruder. Target hardening with certified security doors, security windows and secure locks are revealed to be much more effective to deter burglary attacks than other security devices, such as CCTV, lightings and alarms which have largely psychological and indirect impact. A pilot program of target hardening utilizing certified security window and locks was carried out in Ansan city, South Korea in 2016. This study is based on the quasi-experimental design of this program for a residential area. The researchers tried to verify the crime displacement effect of the target hardening program and the diffusion effects of crime prevention benefits by analysing the crime statistics. The evaluation utilized WDQ(Weighted Displacement Quotient) technique to analyze whether the crime displacement occurred, compared the crime statistics of the experimental area with that of buffer zone and controlled areas. The result showed that the target hardening program was significantly effective in crime prevention. The number of burglary in the experimental site with target hardening intervention reduced by 100%, although the areas without the intervention showed reduction in the burglary. The crime displacement was not found at all, and the number of burlary at the buffer zone also reduced significantly.

• The Journal of the Korea Contents Association
• /
• v.21 no.9
• /
• pp.149-163
• /
• 2021

The 4th industrial revolution refers to the next-generation industrial revolution led by information and communication technologies such as artificial intelligence (AI), Internet of Things (IoT), robot technology, drones, autonomous driving and virtual reality (VR) and it also has made a significant impact on the development of the advertising industry. However, the world is rapidly changing to a non-contact, non-face-to-face living environment to prevent the spread of COVID 19. Accordingly, the role of the 4th industrial revolution and advertising is changing. Therefore, in this study, text analysis was performed using Big Kinds to examine the 4th industrial revolution and changes in advertising before and after COVID 19. Comparisons were made between 2019 before COVID 19 and 2020 after COVID 19. Main topics and documents were classified through LDA topic model analysis and Word2vec, a deep learning technique. As the result of the study showed that before COVID 19, policies, contents, AI, etc. appeared, but after COVID 19, the field gradually expanded to finance, advertising, and delivery services utilizing data. Further, education appeared as an important issue. In addition, if the use of advertising related to the 4th industrial revolution technology was mainstream before COVID 19, keywords such as participation, cooperation, and daily necessities, were more actively used for education on advanced technology, while talent cultivation appeared prominently. Thus, these research results are meaningful in suggesting a multifaceted strategy that can be applied theoretically and practically, while suggesting the future direction of advertising in the 4th industrial revolution after COVID 19.